Material Processing with a High Frequency Millimeter-Wave Source

A millimeter-wave beam based on a 15-kW, continuous-wave, 83-GHz gyrotron with superconducting magnets system is being investigated for use in material processing. The millimeter-wave beam can be focused to a few millimeters and manipulated quasi-optically and has been used in the following experiments: joining of ceramics (both similar and dissimilar materials), brazing of poled piezoelectric ceramics without significant heating and depoling, and coating of metals and polymers. Joining has been done directly and with reactive brazes. In coating, the beam's short wavelength and absorption depth permit effective ceramic-coating deposition on lower temperature materials, e.g., polymers and metals, without significant substrate heating, and localized deposition of coatings as well. Finally, the millimeter-wave source has been used in the efficient production of nanophase metal and ceramic powders, via a greatly accelerated modified polyol process producing smaller powders of greater uniformity. The results and implications of the various experiments will be discussed with some theoretical calculations and modeling.