Study and validation testing of the dynamics of a robotic system with flexible links and joints

The dynamics of a 6 DOF lightweight and compact manipulator is modeled and simulated in this work. Both joint and link flexibilities are considered in order to determine modal properties of the robotic system. The numerical results are then compared with experimental measurements of predefined trajectories through a laser tracker. It is demonstrated that both joint and link flexibilities have important effects on the end-effector motion and the vibrational properties of the system.

[1]  Zhaoheng Liu,et al.  Dynamic simulation and configuration dependant modal identification of a portable flexible-link and flexible-joint robot , 2010 .

[2]  Stig Moberg,et al.  Identification of Flexibility Parameters of 6-axis Industrial Manipulator Models , 2006 .

[3]  Warren P. Seering,et al.  A nonlinear model of a harmonic drive gear transmission , 1996, IEEE Trans. Robotics Autom..

[4]  R. Dhaouadi,et al.  Modelling and Analysis of Nonlinear Stiffness, Hysteresis and Friction in Harmonic Drive Gears , 2008 .

[5]  Bruce Hazel,et al.  Field repair and construction of large hydropower equipment with a portable robot , 2012, J. Field Robotics.

[6]  S. Umeyama,et al.  Least-Squares Estimation of Transformation Parameters Between Two Point Patterns , 1991, IEEE Trans. Pattern Anal. Mach. Intell..

[7]  Eberhard Abele,et al.  Modeling and Identification of an Industrial Robot for Machining Applications , 2007 .

[8]  Jonathon Shlens,et al.  A Tutorial on Principal Component Analysis , 2014, ArXiv.

[9]  Jorge Angeles,et al.  Nonlinear modeling and parameter identification of harmonic drive robotic transmissions , 1995, Proceedings of 1995 IEEE International Conference on Robotics and Automation.

[10]  Bruce Hazel,et al.  A portable, multiprocess, track‐based robot for in situ work on hydropower equipment , 2012, J. Field Robotics.

[11]  Zhaoheng Liu,et al.  Dynamic model and modal testing for vibration analysis of robotic grinding process with a 6DOF flexible-joint manipulator , 2009, 2009 International Conference on Mechatronics and Automation.

[12]  Zhaoheng Liu,et al.  Étude des propriétés vibratoires d'un système robotique en opération de meulage par modélisation multi-corps flexibles , 2013 .

[13]  Fathi H. Ghorbel,et al.  On the Kinematic Error in Harmonic Drive Gears , 2001 .