Feed-Forwarding the Output Voltage to Improve Efficiency for Envelope-Tracking Power Supply Based on a Switch-Linear Hybrid Scheme

Envelope-tracking (ET) technique is one of the most promising methods to improve the efficiency of the modern wireless communication transmitters, which is based on using a high-efficient power supply to provide varying voltage to the RF power amplifier. For this application, this letter adopts an AB-type linear amplifier and a synchronous rectification buck converter connected in parallel at the output to construct the ET power supply. The linear amplifier features of wide bandwidth and makes the output voltage follow the envelope of the transmitted signal; the buck converter features of high efficiency provides most of the load current. An average current control strategy with constant switching frequency is proposed, and it is further improved by feed-forwarding the output voltage to reduce the current of the linear amplifier, leading to higher efficiency. A prototype is built and shown to perform very well, achieving high efficiency and track bandwidth of about 100 kHz.

[1]  L.E. Larson,et al.  Design of wide-bandwidth envelope-tracking power amplifiers for OFDM applications , 2005, IEEE Transactions on Microwave Theory and Techniques.

[2]  O. Garcia,et al.  Comparison of two different cell topologies for a multilevel power supply to achieve high efficiency envelope amplifier , 2009, 2009 IEEE Energy Conversion Congress and Exposition.

[3]  George B. Yundt.  Series parallel connected composite amplifiers , 1984, 1984 IEEE Power Electronics Specialists Conference.

[4]  A.J.M. van Tuijl,et al.  A power efficient audio amplifier combining switching and linear techniques , 1998, Proceedings of the 24th European Solid-State Circuits Conference.

[5]  M.A.E. Andersen,et al.  Envelope tracking power supply with fully controlled 4th order output filter , 2006, Twenty-First Annual IEEE Applied Power Electronics Conference and Exposition, 2006. APEC '06..

[6]  Robert Caverly,et al.  High efficiency amplifier and signal source module for ISM-band applications , 2011, 2011 IEEE Topical Conference on Power Amplifiers for Wireless and Radio Applications.

[7]  M.A.E. Andersen,et al.  High-Bandwidth, High-Efficiency Envelope Tracking Power Supply for 40W RF Power Amplifier Using Paralleled Bandpass Current Sources , 2005, 2005 IEEE 36th Power Electronics Specialists Conference.

[8]  Eduard Alarcón,et al.  Efficiency optimization in linear-assisted switching power converters for envelope tracking in RF power amplifiers , 2005, 2005 IEEE International Symposium on Circuits and Systems.

[9]  Gin-Kou Ma,et al.  Design of Highly Efficient Wideband RF Polar Transmitters Using the Envelope-Tracking Technique , 2009, IEEE Journal of Solid-State Circuits.

[10]  Xiaodong Liu,et al.  An arbitrary waveform power amplifier adopting Switch-Linear Hybrid technology , 2008, 2008 International Conference on Electrical Machines and Systems.

[11]  Miguel Rodr,et al.  A Multiple-Input Digitally Controlled Buck Converter for Envelope Tracking Applications in Radiofrequency Power Amplifiers , 2010 .

[12]  F. Raab.  Intermodulation distortion in Kahn-technique transmitters , 1996 .

[13]  V. Yousefzadeh,et al.  Three-level buck converter for envelope tracking applications , 2006, IEEE Transactions on Power Electronics.

[14]  Peter M. Asbeck,et al.  High-efficiency power amplifier using dynamic power-supply voltage for CDMA applications , 1999 .

[15]  Douglas Self.  Audio power amplifier design handbook , 1996 .