Chemically Modified Banana Fiber: Structure, Dielectrical Properties and Biodegradability

Banana fibers, as well as other lignocellulosic fibers, are constituted of cellulose, hemicellulose, lignin, pectin, wax and water soluble components. The abundance of this fiber combined with the ease of its processing is an attractive feature, which makes it a valuable substitute for synthetic fibers that are potentially toxic. In this work, the structure characterization of the banana fiber modified by alkaline treatment was studied. Some important properties of this fiber changed due to some chemical treatments, such as the crystalline fraction, dielectric behavior, metal removal (governed by solution pH) and biodegradation. Our results showed that treated banana fiber is a low cost alternative for metal removal in aqueous industry effluents. Thus, for regions with low resources, the biosorbents are an alternative to diminish the impact of pollution caused by local industries, besides being a biodegradable product.

[1]  R. Cavalcante,et al.  Evaluation of a low-cost adsorbent for removal of toxic metal ions from wastewater of an electroplating factory. , 2009, Journal of environmental management.

[2]  B. Nasernejad,et al.  Camparison for biosorption modeling of heavy metals (Cr (III), Cu (II), Zn (II)) adsorption from wastewater by carrot residues , 2005 .

[3]  P. S. Rao,et al.  Removal of nickel (II) from aqueous solutions using marine macroalgae as the sorbing biomass. , 2004, Chemosphere.

[4]  D. Meissner,et al.  Dielectric spectroscopic analysis of wet and well dried starches in comparison with other polysaccharides , 2001 .

[5]  R. Tyagi,et al.  Lead Removal from Acidic Solutions by Sorption on Cocoa Shells: Effect of Some Parameters , 2003 .

[6]  Richard A. Williams,et al.  Tea waste as a low cost adsorbent for the removal of Cu and Pb from wastewater , 2007 .

[7]  W. Tanthapanichakoon,et al.  Removal of heavy metals by adsorbent prepared from pyrolyzed coffee residues and clay , 2004 .

[8]  K. Singh,et al.  Removal of cadmium from wastewater using agricultural waste 'rice polish'. , 2005, Journal of hazardous materials.

[9]  R. Shanks,et al.  Composition, structure and thermal degradation of hemp cellulose after chemical treatments , 2005 .

[10]  Roger Perry,et al.  Low-cost adsorbents for waste and wastewater treatment: a review , 1992 .

[11]  Emmanuel G. Koukios,et al.  Thermoplastic polymers reinforced with fibrous agricultural residues , 2005 .

[12]  S. P. Rowland.  Water in Polymers , 1980 .

[13]  H. Schober,et al.  Dynamics of water adsorbed to cellulose , 1999 .

[14]  D. Meissner,et al.  Comparison of the molecular dynamics of celluloses and related polysaccharides in wet and dried states by means of dielectric spectroscopy , 2000 .

[15]  María del Rosario Martínez Martínez,et al.  Sorption of Pb(II), Ni(II), Cu(II) and Cd(II) from aqueous solution by olive stone waste , 2006 .

[16]  M. Torem,et al.  BIOSORPTION OF CADMIUM BY GREEN COCONUT SHELL POWDER , 2006 .

[17]  Haiping Yang,et al.  Characteristics of hemicellulose, cellulose and lignin pyrolysis , 2007 .

[18]  Kestur Gundappa Satyanarayana,et al.  Studies on lignocellulosic fibers of Brazil. Part I: Source, production, morphology, properties and applications , 2007 .

[19]  T. E. Cloete,et al.  Lignocellulose biodegradation: Fundamentals and applications , 2002 .

[20]  Hyoe Hatakeyama,et al.  Interaction between water and hydrophilic polymers , 1998 .

[21]  Sabu Thomas,et al.  The role of fibre/matrix interactions on the dynamic mechanical properties of chemically modified banana fibre/polyester composites , 2006 .

[22]  R. Dhakal,et al.  Adsorptive separation of heavy metals from an aquatic environment using orange waste , 2005 .

[23]  D. Rosa,et al.  Sisal chemically modified with lignins: Correlation between fibers and phenolic composites properties , 2008 .

[24]  M. Chang,et al.  Structure, pretreatment and hydrolysis of cellulose , 1981 .

[25]  R. Cavalcante,et al.  Removal of Copper, Nickel and Zinc Ions from Aqueous Solution by Chitosan-8-Hydroxyquinoline Beads , 2008 .

[26]  Z. Aksu.  Equilibrium and kinetic modelling of cadmium(II) biosorption by C. vulgaris in a batch system: effect of temperature , 2001 .

[27]  D. Meissner,et al.  Polymerdynamics of cellulose and other polysaccharides in solid state-secondary dielectric relaxation processes , 2001 .

[28]  V. Álvarez,et al.  Extraction of cellulose and preparation of nanocellulose from sisal fibers , 2008 .

[29]  Zachariah Oommen,et al.  A comparison of the mechanical properties of phenol formaldehyde composites reinforced with banana fibres and glass fibres , 2002 .

[30]  S. Shukla,et al.  Removal of nickel from aqueous solutions by sawdust. , 2005, Journal of hazardous materials.

[31]  C. F. Forster,et al.  THE USE OF SAGO WASTE FOR THE SORPTION OF LEAD AND COPPER , 1998 .

[32]  M. Šćiban,et al.  Modified softwood sawdust as adsorbent of heavy metal ions from water. , 2006 .

[33]  Zachariah Oommen,et al.  Dynamic mechanical analysis of banana fiber reinforced polyester composites , 2003 .

[34]  D. Rosa,et al.  Cardanol Biocomposites Reinforced with Jute Fiber: Microstructure, Biodegradability, and Mechanical Properties , 2010 .

[35]  Sabu Thomas,et al.  Influence of interfacial adhesion on the mechanical properties and fracture behaviour of short sisal fibre reinforced polymer composites , 1996 .