Using high-contrast salty development of hydrogen silsesquioxane for sub-10‐nm half-pitch lithography

When used as a negative-tone electron-beam resist, hydrogen silsesquioxane (HSQ) is typically developed in an aqueous alkali solution such as tetramethyl ammonium hydroxide. This development process results in low contrast. In this work, the authors instead used a mixture of salt and alkali to significantly increase the contrast of HSQ. Contrast values as high as 10 in a 115‐nm-thick resist were achieved by developing HSQ in an aqueous mixture of NaOH alkali and NaCl salt. Remarkably, this salty developer resulted in contrast enhancement without significant decrease in resist sensitivity. The improved contrast of HSQ enabled the fabrication of 7nm half-pitch nested-“L” structures in a 35‐nm-thick resist with minimal loss in thickness using a 30kV electron-beam acceleration voltage. They noticed a strong dependence of contrast enhancement on the concentration and type of cations and anions in the aqueous developer solution.

[1]  P. Juodawlkis,et al.  Direct patterning of spin-on glass with 157 nm lithography: Application to nanoscale crystal growth , 2005 .

[2]  H. Namatsu,et al.  5-nm-Order Electron-Beam Lithography for Nanodevice Fabrication , 2003, Digest of Papers Microprocesses and Nanotechnology 2003. 2003 International Microprocesses and Nanotechnology Conference.

[3]  Kenji Yamazaki,et al.  Nano-patterning of a hydrogen silsesquioxane resist with reduced linewidth fluctuations , 1998 .

[4]  Jean-Pierre Vilcot,et al.  Optimization of HSQ resist e-beam processing technique on GaAs material , 2004 .

[5]  Zheng Cui,et al.  Effects of developing conditions on the contrast and sensitivity of hydrogen silsesquioxane , 2006 .

[6]  Wei Chen,et al.  Fabrication of 5–7 nm wide etched lines in silicon using 100 keV electron‐beam lithography and polymethylmethacrylate resist , 1993 .

[7]  C. W. Hagen,et al.  10nm lines and spaces written in HSQ, using electron beam lithography , 2007 .

[8]  Heinrich Kurz,et al.  Study of a high contrast process for hydrogen silsesquioxane as a negative tone electron beam resist , 2003 .

[9]  K. Sarveswaran,et al.  Sub-10 nm electron beam lithography using cold development of poly(methylmethacrylate) , 2004 .

[10]  R. Sobolewski,et al.  Fabrication development for nanowire GHz-counting-rate single-photon detectors , 2005, IEEE Transactions on Applied Superconductivity.

[11]  Joel K. W. Yang,et al.  Enhancing etch resistance of hydrogen silsesquioxane via postdevelop electron curinga) , 2006 .

[12]  Marija Drndic,et al.  Sub-10 nm device fabrication in a transmission electron microscope. , 2007, Nano letters.

[13]  Lewis W. Flanagin,et al.  The Mechanism of Phenolic Polymer Dissolution: A New Perspective , 1997 .

[14]  Vikas Anant,et al.  Nanowire single-photon detector with an integrated optical cavity and anti-reflection coating. , 2006, Optics express.