3D-printed flat lens for microwave applications

This paper presents the design of a 3D-printed flat graded-index lens based on ray optics. The lens is comprised of several concentric dielectric rings with bespoke relative permittivities for transforming spherical waves into plane waves. 3D-printing was used to fabricate this lens with graded and tailored dielectric properties in a single process. The 3D-printed flat lens is low-cost and light-weight, but provides broadband and high gain performance. Measurement results show that the realised gain of the lens is 8 to 10 dB over the frequency band ranging from 12 to 18 GHz.

[1]  M. R. Chaharmir,et al.  A Wideband Transmitarray Using Dual-Resonant Double Square Rings , 2010, IEEE Transactions on Antennas and Propagation.

[2]  W. Weir.  Automatic measurement of complex dielectric constant and permeability at microwave frequencies , 1974 .

[3]  Wei Hong,et al.  Systematic design of planar lenses using artificial dielectrics , 2010, 2010 IEEE Antennas and Propagation Society International Symposium.

[4]  Raj Mittra,et al.  On the Synthesis of a Flat Lens using a Wideband Low-Reflection Gradient-Index Metamaterial , 2011 .

[5]  J. C. Vardaxoglou,et al.  Simulation Methodology for Synthesis of Antenna Substrates With Microscale Inclusions , 2012, IEEE Transactions on Antennas and Propagation.

[6]  William G. Whittow,et al.  Novel 3D printed synthetic dielectric substrates , 2015 .

[7]  Yang Hao,et al.  Transformation optics for antennas: why limit the bandwidth with metamaterials? , 2013, Scientific Reports.

[8]  Y. Hao,et al.  A broadband zone plate lens from transformation optics. , 2011, Optics express.

[9]  C. C. Njoku,et al.  Comparative study of nanomaterials' effective properties using canonical formations , 2010, 2010 Loughborough Antennas & Propagation Conference.

[10]  Raj Mittra,et al.  Flat-Lens Design Using Field Transformation and Its Comparison With Those Based on Transformation Optics and Ray Optics , 2013, IEEE Antennas and Wireless Propagation Letters.

[11]  T. Cui,et al.  Three-dimensional broadband and high-directivity lens antenna made of metamaterials , 2011 .

[12]  Giorgio Savini,et al.  A new artificial material approach for flat THz frequency lenses. , 2012, Optics express.

[13]  Wei Hong,et al.  A zoned two-layer flat lens design , 2011, 2011 International Workshop on Antenna Technology (iWAT).

[14]  Raj Mittra,et al.  A technique for designing flat lenses using artificially engineered materials , 2014, 2014 IEEE Antennas and Propagation Society International Symposium (APSURSI).

[15]  M. Rosenbluth,et al.  Limitations on subdiffraction imaging with a negative refractive index slab , 2002, cond-mat/0206568.