Mathematical modelling of single and multi-strand tundish for inclusion analysis

In the present work a numerical study was carried out to investigate the inclusion behaviour in a four strand asymmetric billet caster tundish. A parameter called separation efficiency was used to compare inclusion behaviour quantitatively. An open source CFD code called OpenFOAM was used to model the inclusions through Lagrangian Particle Tracking approach. First, the Lagrangian particle class was defined in the existing simpleFoam solver of the OpenFOAM and the same customized solver was used to track particles in the already obtained velocity field. Inclusions were modelled as spheres and various forces acting were also considered. Present numerical results were validated using available experimental results and found to be in good agreement. Further, such inclusion behaviour was also extended for a real industrial case tundish. Inclusion flotation characteristics in thermally induced flow was analyzed in detail. This is, perhaps, for the first time such an exhaustive study on inclusion analysis being reported considering the forces acting on the inclusions particles and with OpenFOAM.

[1]  Kaike Cai,et al.  Fluid flow and inclusion removal in continuous casting tundish , 2000 .

[2]  Pradeep Kumar Jha,et al.  Fluid flow and mixing in a six strand billet caster tundish: A parametric study , 2001 .

[3]  Yuji Miki,et al.  Modeling of inclusion removal in a tundish , 1999 .

[4]  Anil Kumar,et al.  Modeling of Fluid Flow and Residence Time Distribution in a Four-strand Tundish for Enhancing Inclusion Removal , 2008 .

[5]  Numerical Simulation of Flow-induced Wall Shear Stress to Study a Curved Shape Billet Caster Tundish Design , 2008 .

[6]  Shailja Singh,et al.  Model Study of the Dynamics of Flow of Steel Melt in the Tundish , 1993 .

[7]  G. Wen,et al.  The Transient Stages of Inclusion Evolution During Al and/or Ti Additions to Molten Iron , 2007 .

[8]  Charles Hirsch,et al.  An introduction to turbulence models , 1990 .

[9]  S. A. Morsi,et al.  An investigation of particle trajectories in two-phase flow systems , 1972, Journal of Fluid Mechanics.

[10]  Jiunn-Lin Yeh,et al.  An improved fluid flow model for slab tundishes and its comparison with a full-scale water model , 1994 .

[11]  Rodolfo D. Morales,et al.  NUMERICAL SIMULATION OF THE EFFECTS OF BUOYANCY FORCES AND FLOW CONTROL DEVICES ON FLUID FLOW AND HEAT TRANSFER PHENOMENA OF LIQUID STEEL IN A TUNDISH , 2000 .

[12]  Z. Meijie,et al.  Numerical simulation and industrial practice of inclusion removal from molten steel by gas bottom-blowing in continuous casting tundish , 2011 .

[13]  David R. Basco,et al.  Computational fluid dynamics - an introduction for engineers , 1989 .

[14]  Koulis Pericleous,et al.  An experimental and numerical CFD study of turbulence in a tundish container , 2002 .

[15]  R. Morales,et al.  Modeling study of the influence of turbulence inhibitors on the molten steel flow, tracer dispersion, and inclusion trajectories in tundishes , 2001 .

[16]  B. Launder,et al.  The numerical computation of turbulent flows , 1990 .

[17]  A. K. Sinha,et al.  Mathematical Modeling of Inclusion Transport and Removal in Continuous Casting Tundishes , 1993 .

[18]  Quan Yuan,et al.  Computational and experimental study of turbulent flow in a 0.4-scale water model of a continuous steel caster , 2004 .

[19]  S. K. Ajmani,et al.  Optimisation of taphole angle to minimise flow induced wall shear stress on the hearth , 2004 .

[20]  Herbert Pfeifer,et al.  Particle Distribution and Separation in Continuous Casting Tundish , 2009 .

[21]  P. Rao,et al.  Effect of Height and Position of Dams on Inclusion Removal in a Six Strand Tundish , 2008 .

[22]  S. Sarkar,et al.  Numerical analysis of unsteady hydrodynamics and thermal transport in five-strand asymmetric tundish , 2012 .

[23]  Y. Sahai,et al.  The effect of tundish wall inclination on the fluid flow and mixing: A modeling study , 1987 .

[24]  J. D. Lavers,et al.  Application of electromagnetic forces to reduce tundish nozzle clogging , 2004 .