Hot deformation behavior and process parameter optimization of Ti22Al25Nb using processing map

[1]  M. Fu,et al.  Discontinuous yielding in Ni-base superalloys during high-speed deformation , 2015 .

[2]  Miaoquan Li,et al.  Flow behavior and deformation mechanism in the isothermal compression of the TC8 titanium alloy , 2014 .

[3]  Y. C. Lin,et al.  A physically-based constitutive model for a typical nickel-based superalloy , 2014 .

[4]  Jiao Deng,et al.  Hot deformation behavior and processing map of a typical Ni-based superalloy , 2014 .

[5]  D. Fabrègue,et al.  Modeling Grain Boundary Motion and Dynamic Recrystallization in Pure Metals , 2013, Metallurgical and Materials Transactions A.

[6]  Y. C. Lin,et al.  Hot deformation and processing map of a typical Al–Zn–Mg–Cu alloy , 2013 .

[7]  M. Fu,et al.  Flow behavior and hot workability of FGH4096 superalloys with different initial microstructures by using advanced processing maps , 2012 .

[8]  A. K. Bhaduri,et al.  Optimization of hot working parameters for thermo-mechanical processing of modified 9Cr―1Mo (P91) steel employing dynamic materials model , 2011 .

[9]  K. Dehghani,et al.  Prediction of dynamic recrystallization kinetics and grain size for 410 martensitic stainless steel during hot deformation , 2010 .

[10]  Gao Yang-jun.  PHASE-FIELD SIMULATION OF TWO-PHASE GRAIN GROWTH WITH HARD PARTICLES , 2009 .

[11]  Long-Qing Chen,et al.  Effect of second-phase particle morphology on grain growth kinetics , 2009 .

[12]  Markus Apel,et al.  Grain Growth Simulations Including Particle Pinning Using the Multiphase-field Concept , 2009 .

[13]  Jue Zhong,et al.  Microstructural evolution in 42CrMo steel during compression at elevated temperatures , 2008 .

[14]  张建伟,et al.  Effect of microstructure on tensile properties and fracture behavior of intermetallic Ti2AlNb alloys , 2002 .

[15]  B. Majumdar,et al.  Part I. The microstructural evolution in Ti-Al-Nb O+Bcc orthorhombic alloys , 1999 .

[16]  D. Banerjee.  The intermetallic Ti2AlNb , 1997 .

[17]  S. M. Doraivelu,et al.  Modeling of dynamic material behavior in hot deformation: Forging of Ti-6242 , 1984 .

[18]  U. F. Kocks,et al.  Kinetics of flow and strain-hardening☆ , 1981 .