Modeling, simulation and optimization of a solar collector driven water heating and absorption cooling plant

Abstract A cogeneration system consisting of a solar collector, a gas burner, a thermal storage reservoir, a hot water heat exchanger, and an absorption refrigerator is devised to simultaneously produce heating (hot water heat exchanger) and cooling (absorption refrigerator system). A simplified mathematical model, which combines fundamental and empirical correlations, and principles of classical thermodynamics, mass and heat transfer, is developed. The proposed model is then utilized to simulate numerically the system transient and steady state response under different operating and design conditions. A system global optimization for maximum performance (or minimum exergy destruction) in the search for minimum pull-down and pull-up times, and maximum system second law efficiency is performed with low computational time. Appropriate dimensionless groups are identified and the results presented in normalized charts for general application. The numerical results show that the three way maximized system second law efficiency, η II, max , max , max , occurs when three system characteristic mass flow rates are optimally selected in general terms as dimensionless heat capacity rates, i.e., ( ψ sp,s , ψ wx,wx , ψ H,s ) opt ≅ ( 1.43 , 0.23 , 0.14 ) . The minimum pull-down and pull-up times, and maximum second law efficiencies found with respect to the optimized operating parameters are sharp and, therefore important to be considered in actual design. As a result, the model is expected to be a useful tool for simulation, design, and optimization of solar collector based energy systems.