Utilizing differential evolution (DE) technique to optimize operating conditions of an integrated thermally coupled direct DME synthesis reactor

According to global requirements to DME as an alternative environment friendly fuel and also regarding the positive effects of employing multifunctional auto-thermal reactors as novel concept in process intensification, direct DME synthesis was coupled with dehydrogenation of cyclohexane in a thermally coupled heat exchanger reactor composed of two separated sides for exothermic and endothermic reactions in our previous study. DME is conventionally produced by a two-stage process which is called the indirect method of DME production. Recently, a new method called direct DME synthesis, have been introduced and gained much more attention due to its economical superiority compared with the indirect method. In this new process, the methanol production and dehydration one occur simultaneously on the hybrid catalysts in only one reactor and consequently the methanol purification unit can be neglected. In the present work, the aforementioned reactor is optimized applying differential evolution (DE) algorithm as an effective and robust optimization method. The objective of this research is to optimize the operating conditions contributing to maximization of the summation of DME and benzene mole fractions in the reactor outlet streams as desired products. The optimal inlet temperatures of exothermic and endothermic sides are determined within their practical range for prevention of catalyst deactivation by sintering. Utilizing the optimization results, the reactor performance would be improved by decreasing of inlet feed flow rates and rising of the production rates of the desired products. This conducted study results in enormous reduction in the operational costs as well as increase of the net profit of the plant. It should be mentioned that an investigation relevant to environmental aspects and commercial viability of the optimized reactor is necessary in order to commercialize the considered process.

[1]  B. V. Babu,et al.  Differential evolution strategies for optimal design of shell-and-tube heat exchangers , 2007 .

[2]  Mohammad Reza Rahimpour,et al.  A comparison of hydrogen and methanol production in a thermally coupled membrane reactor for co‐current and counter‐current flows , 2011 .

[3]  Alexander L. Lindsay,et al.  Thermal Conductivity of Gas Mixtures , 1950 .

[4]  A. Fukuoka,et al.  Efficient hydrogen production using cyclohexane and decalin by pulse-spray mode reactor with Pt catalysts , 2003 .

[5]  Edward L Cussler,et al.  Diffusion: Mass Transfer in Fluid Systems , 1984 .

[6]  Mohammad Reza Rahimpour,et al.  Optimization of methanol synthesis and cyclohexane dehydrogenation in a thermally coupled reactor using differential evolution (DE) method , 2009 .

[7]  Jun Song,et al.  Performance of a controllable premixed combustion engine fueled with dimethyl ether , 2004 .

[8]  D. Chadwick,et al.  Kinetics and modelling of dimethyl ether synthesis from synthesis gas , 1999 .

[9]  Shuben Li,et al.  Bifunctional catalysts for conversion of synthesis gas to dimethyl ether , 1998 .

[10]  Jean-Claude Charpentier,et al.  In the frame of globalization and sustainability, process intensification, a path to the future of chemical and process engineering (molecules into money) , 2007 .

[11]  Mohammad Reza Rahimpour,et al.  Mathematical modeling of a multi-stage naphtha reforming process using novel thermally coupled recuperative reactors to enhance aromatic production , 2010 .

[12]  B. V. Babu,et al.  Modified differential evolution (MDE) for optimization of non-linear chemical processes , 2006, Comput. Chem. Eng..

[13]  O. Fujita,et al.  Performance of NOX reduction catalysts with simulated dimethyl ether diesel engine exhaust gas , 2004 .

[14]  Hoo-Gon Choi,et al.  Performance of direct dimethyl ether fuel cells at low temperature , 2005 .

[15]  R. Reid,et al.  The Properties of Gases and Liquids , 1977 .

[16]  K. Sotowa,et al.  Modeling of an FAU-type zeolite membrane reactor for the catalytic dehydrogenation of cyclohexane , 2004 .

[17]  David E. Goldberg,et al.  Genetic Algorithms in Search Optimization and Machine Learning , 1988 .

[18]  D. Fang,et al.  Simulation and model design of pipe-shell reactor for the direct synthesis of dimethyl ether from syngas , 2008 .

[19]  B. V. Babu,et al.  Optimal design of an auto-thermal ammonia synthesis reactor , 2005, Comput. Chem. Eng..

[20]  Dimitrios T. Hountalas,et al.  DI Diesel Engine Performance and Emissions from the Oxygen Enrichment of Fuels with Various Aromatic Content , 2004 .

[21]  A. Maureen Rouhi,et al.  Underwater chemistry creates massive seafloor mineral deposits , 1995 .

[22]  Hans-Paul Schwefel,et al.  Numerical Optimization of Computer Models , 1982 .

[23]  C. D. Gelatt,et al.  Optimization by Simulated Annealing , 1983, Science.

[24]  F. Larachi,et al.  Dimethyl Ether Synthesis with in situ H2O Removal in Fixed-Bed Membrane Reactor: Model and Simulations† , 2010 .

[25]  K. Kobe,et al.  Chemical engineering kinetics , 1956 .

[26]  N. Itoh,et al.  Hydrogen recovery from cyclohexane as a chemical hydrogen carrier using a palladium membrane reactor , 2003 .

[27]  V. Kirillov,et al.  Modeling of a heat-coupled catalytic reactor with co-current oxidation and conversion flows , 2007 .

[28]  Weiyong Ying,et al.  Intrinsic Kinetics of Dimethyl Ether Synthesis from Syngas , 2005 .

[29]  Vladimir Galvita,et al.  Production of hydrogen from dimethyl ether , 2001 .

[30]  Reza Eslamloueyan,et al.  Direct dimethyl ether (DME) synthesis through a thermally coupled heat exchanger reactor , 2011 .

[31]  H. S. Fogler,et al.  Elements of Chemical Reaction Engineering , 1986 .

[32]  N. Papayannakos,et al.  Mathematical modelling of the performance of non-isothermal membrane reactors , 1997 .

[33]  Jan Harmsen,et al.  Process intensification in the petrochemicals industry: Drivers and hurdles for commercial implementation , 2010 .

[34]  Wen-De Xiao,et al.  Theoretical Analysis of Fluidized-Bed Reactor for Dimethyl Ether Synthesis from Syngas , 2003 .

[35]  T. Fukunaga,et al.  The influence of metals and acidic oxide species on the steam reforming of dimethyl ether (DME) , 2008 .

[36]  G. Froment,et al.  Kinetic modeling of pure hydrogen production from decalin , 2008 .

[37]  Rainer Storn,et al.  Differential Evolution – A Simple and Efficient Heuristic for global Optimization over Continuous Spaces , 1997, J. Glob. Optim..

[38]  R. Borup,et al.  Role of acidity on the hydrolysis of dimethyl ether (DME) to methanol , 2005 .

[39]  R. Borup,et al.  Dimethyl ether (DME) as an alternative fuel , 2006 .

[40]  Spencer C. Sorenson,et al.  Dimethyl Ether in Diesel Engines: Progress and Perspectives , 2001 .

[41]  F. Dautzenberg,et al.  Process intensification using multifunctional reactors , 2001 .

[42]  Bing Zhong,et al.  Modification of Cu-based methanol synthesis catalyst for dimethyl ether synthesis from syngas in slurry phase , 2005 .

[43]  D. Himmelblau,et al.  Optimization of Chemical Processes , 1987 .

[44]  N. Itoh,et al.  A membrane reactor using palladium , 1987 .

[45]  Payam Parvasi,et al.  Dynamic optimization of a novel radial-flow, spherical-bed methanol synthesis reactor in the presence of catalyst deactivation using Differential Evolution (DE) algorithm , 2009 .

[46]  Said S.E.H. Elnashaie,et al.  Modeling and basic characteristics of novel integrated dehydrogenation — hydrogenation membrane catalytic reactors , 2000 .

[47]  En Sup Yoon,et al.  Numerical Analysis of a Pilot-Scale Fixed-Bed Reactor for Dimethyl Ether (DME) Synthesis , 2008 .

[48]  Wen-de Xiao,et al.  Simulation and experiment study of dimethyl ether synthesis from syngas in a fluidized-bed reactor , 2004 .