论文信息 - Processing of metals with ps-laser pulses in the range between 10ps and 100ps

Processing of metals with ps-laser pulses in the range between 10ps and 100ps

The potential of pulsed laser system in the range of 10ps to 100ps pulse duration for material processing has been further investigated. In detail the dependency of the volume ablation rate, penetration depth and threshold fluence on the pulse duration and number of pulses applied to the material will be discussed. The experimental results show that in the case of copper and steel, better results in quality and efficiency of the ablated material are achieved with shorter pulse durations.

Valerio Romano | B. Jaeggi | Beat Neuenschwander | Marc Schmid | Urs Hunziker

[1] Beat Neuenschwander,et al. Processing of dielectric materials and metals with PS laserpulses , 2010 .

[2] Boris N. Chichkov,et al. Ablation of metals by ultrashort laser pulses , 1997 .

[3] A. Tünnermann,et al. Femtosecond, picosecond and nanosecond laser ablation of solids , 1996 .

[4] P. A. Atanasov,et al. Ablation of metals by ultrashort laser pulses , 2004 .

[5] Boris N. Chichkov,et al. Short-pulse laser ablation of solid targets , 1996 .

[6] M. Gedvilas,et al. Use of High Repetition Rate and High Power Lasers in Microfabrication: How to Keep the Efficiency High? , 2009 .

[7] Beat Neuenschwander,et al. Processing of metals and dielectric materials with ps-laserpulses: results, strategies, limitations and needs , 2010, LASE.

[8] Michael F. Becker,et al. Laser-induced damage on single-crystal metal surfaces , 1988 .