Effect of broken wire on bending fatigue characteristics of wire ropes

Abstract The life of damaged wire rope is difficult to judge and the damaged wire rope is prematurely replaced resulting in an enormous economic waste. This paper studies the effect of different distributions of pre-broken wires on bending fatigue behavior of wire ropes using a self-made bending fatigue test facility. The fatigue lives of wire ropes with different distributions of pre-broken wires were studied using both visual inspection and commercial non-destructive inspection technology, combined with electron microscopy. It is found that broken wires on the surface reduce the bending fatigue life of wire ropes. The broken wires increase the stress in the inner wire strands as well as the contact force between the wires. This leads to a concentration of severe wear, which accelerates the density of broken wires locally, leading to short fatigue lives especially in the case with the most concentrated number of pre-broken wires (1 × 4). After numerous wires fail by wear and fatigue, others fail by tensile overload, as evidenced microscopically by necking and ductile failure. The damage in the rope at failure defined by counting broken wires is nearly 50% smaller than the damage value given by the commercial non-destructive damage value, based on magnetic measurements.

[1]  I. R. McColl,et al.  Fretting damage in locked coil steel ropes , 1993 .

[2]  Xiaofan Jia.  Bending Fatigue Damage Behavior of Bearing Wire Rope on Different Pre-tension , 2011 .

[3]  Jeong-In Suh,et al.  Experimental study on fatigue behaviour of wire ropes , 2000 .

[4]  A.R.T. de Silva,et al.  Effect of abrasive wear on the tensile strength of steel wire rope , 2002 .

[5]  B. Arzenšek,et al.  Failure of crane wire rope , 2002 .

[6]  Mitsugu Hanzawa,et al.  Fatigue Behaviour Of Large-Diameter Wire Ropes , 1981 .

[7]  Yin Wan-quan.  Early break failure analysis of steel core for steel wire rope , 2009 .

[8]  Amitava Ray,et al.  Microstructural manifestations of fractured Z-profile steel wires on the outer layer of a failed locked coil wire rope , 2003 .

[9]  Shirong Ge,et al.  Effect of various kinematic parameters of mine hoist on fretting parameters of hoisting rope and a new fretting fatigue test apparatus of steel wires , 2012 .

[10]  V. Kuokkala,et al.  Characterization of the wear of nodular cast iron rollers in contact with wire ropes , 2013 .

[11]  Shirong Ge,et al.  Bending fatigue behaviour of bearing ropes working around pulleys of different materials , 2013 .

[12]  Wen Hong.  The Tensile Fatigue Performance of Steel Ropes , 2000 .

[13]  M. Benedetti,et al.  Numerical analysis of the rolling process of shaped wires for locked steel ropes , 2005 .

[14]  Anssi Laukkanen,et al.  Comparison of laboratory rolling–sliding wear tests with in-service wear of nodular cast iron rollers against wire ropes , 2015 .

[15]  Paulo José Modenesi,et al.  Low-cycle fatigue life of superelastic NiTi wires , 2009 .

[16]  Shirong Ge,et al.  Finite element analysis of hoisting rope and fretting wear evolution and fatigue life estimation of steel wires , 2013 .

[17]  Bing Xu,et al.  A three dimensional approach to model steel wire ropes used in high energy absorber apparatus , 2014 .

[18]  Vigilio Fontanari,et al.  Fire behavior of steel wire ropes: Experimental investigation and numerical analysis , 2015 .

[19]  Shirong Ge,et al.  Research on the fatigue and fracture behavior due to the fretting wear of steel wire in hoisting rope , 2003 .

[20]  C. R. Chaplin,et al.  Failure mechanisms in wire ropes , 1995 .

[21]  Pavel Peterka,et al.  Failure analysis of hoisting steel wire rope , 2014 .

[22]  Wear-related fatigue in a wire rope failure , 1994 .

[23]  William M. Banks,et al.  Advances in the fatigue assessment of wire ropes , 2001 .