Electromigration in thin-film interconnection lines: models, methods and results

[1]  H. B. Huntington,et al.  Current-induced marker motion in gold wires☆ , 1961 .

[2]  J. Friedel,et al.  Sur l'electrolyse des alliages metalliques , 1962 .

[3]  Akira Kinbara,et al.  The Decay in Electrical Resistance in Evaporated Gold Films , 1965 .

[4]  Robert Rosenberg,et al.  RESISTANCE MONITORING AND EFFECTS OF NONADHESION DURING ELECTROMIGRATION IN ALUMINUM FILMS , 1968 .

[5]  E. S. Meieran,et al.  Electromigration in Thin Al Films , 1969 .

[6]  A. P. Dorey,et al.  The variation of resistance of gold films with time and annealing procedure , 1969 .

[7]  M. Shatzkes,et al.  ELECTRICAL RESISTIVITY MODEL FOR POLYCRYSTALLINE FILMS: THE CASE OF SPECULAR REFLECTION AT EXTERNAL SURFACES , 1969 .

[8]  J. Velzen,et al.  A peculiarity of isotherms of nonideal gases , 1969 .

[9]  T. E. Hartman,et al.  Electromigration in thin gold films , 1969 .

[10]  F. N. Hooge,et al.  1/⨍ noise in continuous thin gold films , 1969 .

[11]  B. Agarwala,et al.  Dependence of Electromigration‐Induced Failure Time on Length and Width of Aluminum Thin‐Film Conductors , 1970 .

[12]  M. Shatzkes,et al.  Electrical-Resistivity Model for Polycrystalline Films: the Case of Arbitrary Reflection at External Surfaces , 1970 .

[13]  R. Rosenberg,et al.  Electromigration Damage in Aluminum Film Conductors , 1970 .

[14]  I. Ames,et al.  Reduction of electromigration in aluminum films by copper doping , 1970 .

[15]  Robert Rosenberg,et al.  Void Formation and Growth During Electromigration in Thin Films , 1971 .

[16]  A. Gangulee,et al.  Effect of Alloy Additions on Electromigration Failures in Thin Aluminum Films , 1971 .

[17]  M. J. Attardo,et al.  Statistical Metallurgical Model for Electromigration Failure in Aluminum Thin‐Film Conductors , 1971 .

[18]  Rolf E. Hummel,et al.  ON THE DIRECTION OF ELECTROMIGRATION IN THIN SILVER, GOLD, AND COPPER FILMS , 1971 .

[19]  F. d'Heurle,et al.  Activation energy for electromigration in aluminum films alloyed with copper , 1971 .

[20]  G. Gurp,et al.  Electromigration in Al Films Containing Si , 1971 .

[21]  L. Berenbaum,et al.  Effect of Oxygen on the Electromigration Behavior of Al Thin Films , 1972 .

[22]  Rolf E. Hummel,et al.  Electromigration in thin silver, copper, gold, indium, tin, lead and magnesium films , 1972 .

[23]  A. Gangulee,et al.  Activation Energy for Electromigration Failure in Aluminum Films Containing Copper , 1972 .

[24]  P. Ghate,et al.  Electromigration‐Induced Failures in, and Microstructure and Resistivity of, Sputtered Gold Films , 1972 .

[25]  P. A. Turner,et al.  Electromigration in conductor stripes under pulsed dc powering , 1972 .

[26]  G. Gurp,et al.  Diffusion‐limited Si precipitation in evaporated Al/Si films , 1973 .

[27]  C. P. Flynn,et al.  Point Defects and Diffusion , 1973 .

[28]  R. Sigsbee.  Electromigration and metalization lifetimes , 1973 .

[29]  J. L. Vossen,et al.  Screening of metal film defects by current noise measurements , 1973 .

[30]  K. Yokoyama,et al.  Electromigration in Aluminum Film Stripes Coated with Anodic Aluminum Oxide Films , 1973 .

[31]  A. Bobbio,et al.  On the spread of time-to-failure measurements in thin metallic films , 1973 .

[32]  P. A. Turner,et al.  Electromigration of Ti–Au thin‐film conductors at 180° C , 1974 .

[33]  Arthur J. Learn.  Electromigration effects in aluminum alloy metallization , 1974 .

[34]  A. Bobbio,et al.  Electromigration Failure in A1 Thin Films under Constant and Reversed DC Powering , 1974 .

[35]  On the direction of electromigration in gold thin films , 1975 .

[36]  Rolf E. Hummel,et al.  Activation energy for electrotransport in thin aluminum films by resistance measurements , 1975 .

[37]  E. Kinsbron,et al.  Electromigration in thin gold films on molybdenum surfaces , 1975 .

[38]  H. B. Huntington.  Effect of driving forces on atom motion , 1975 .

[39]  F. Fiorillo,et al.  Current noise measurements in continuous metal thin films , 1975 .

[40]  R. A. Johns,et al.  Grain boundaries and their effect on thermonigration in pure lead at low diffusion temperatures , 1975 .

[41]  N. Singpurwalla,et al.  Methods for Statistical Analysis of Reliability and Life Data. , 1975 .

[42]  A. Gangulee,et al.  Mass transport during electromigration in aluminum-magnesium thin films☆ , 1975 .

[43]  A. Gangulee,et al.  Effects of Mg additions on the electromigration behavior of Al thin film conductors , 1975 .

[44]  Andrea Bobbio,et al.  A modified reliability expression for the electromigration time-to-failure , 1975 .

[45]  Rolf E. Hummel,et al.  Activation energy for electrotransport in thin silver and gold films , 1975 .

[46]  G. Gurp.  Electromigration in cobalt films , 1976 .

[47]  Conyers Herring,et al.  Stress generation by electromigration , 1976 .

[48]  P. Mazzetti,et al.  Thermal-Equilibrium Properties of Vacancies in Metals through Current-Noise Measurements , 1976 .

[49]  I. Blech.  Electromigration in thin aluminum films on titanium nitride , 1976 .

[50]  Milton Ohring,et al.  Grain‐boundary electromigration in thin films II. Tracer measurements in pure Au , 1977 .

[51]  I. Blech,et al.  Measurement of stress gradients generated by electromigration , 1977 .

[52]  Yigal Komem,et al.  The threshold current density and incubation time to electromigration in gold films , 1977 .

[53]  E. Dobierzewska-Mozrzymas,et al.  Size effects in epitaxial aluminium films , 1977 .

[54]  Rolf E. Hummel,et al.  The effect of minor constituents on the electrotransport‐induced failure site in thin gold films , 1978 .

[55]  P. Ghate,et al.  Electromigration testing of Ti: W/Al and Ti: W/Al-Cu film conductors , 1978 .

[56]  Paul S. Ho,et al.  Intermetallic compounds of Al and transitions metals: Effect of electromigration in 1-2-μm-wide lines , 1978 .

[57]  J. W. Eberhard,et al.  Excess (1f) noise in metals , 1978 .

[58]  Failure of small thin-film conductors due to high current-density pulses , 1979, IEEE Transactions on Electron Devices.

[59]  P. Mazzetti,et al.  Application of the current noise technique to the investigation on dislocations in metals during plastic deformation , 1979 .

[60]  S. P. Sim.  Procurement specification requirements for protection against electromigration failures in aluminium metallizations , 1979 .

[61]  D. B. Fraser,et al.  Electromigration in fine‐line sputter‐gun Al , 1980 .

[62]  M. Polcari,et al.  Observation of electromigration in heavily doped polycrystalline silicon thin films , 1980 .

[63]  T. T. Sheng,et al.  Linewidth dependence of electromigration in evaporated Al‐0.5%Cu , 1980 .

[64]  J. Schoen,et al.  Monte Carlo calculations of structure‐induced electromigration failure , 1980 .

[65]  J. M. Schoen.  A model of electromigration failure under pulsed condition , 1980 .

[66]  Kwaku A Danso,et al.  Thin film metallization studies and device lifetime prediction using AlSi and AlCuSi conductor test bars , 1981 .

[67]  P. M. Horn,et al.  Low-frequency fluctuations in solids: 1/f noise , 1981 .

[68]  H.-U. Schreiber,et al.  Activation energies for the different electromigration mechanisms in aluminum , 1981 .

[69]  Electromigration in aluminum/poly‐silicon composites , 1981 .

[70]  A. Mogro-Campero,et al.  Simple estimate of electromigration failure in metallic thin films , 1982 .

[71]  H.-U. Schreiber,et al.  Lifetime and drift velocity analysis for electromigration in sputtered Al films, multilayers, and alloys , 1983 .

[72]  J. A. Schwarz,et al.  Temperature-ramp resistance analysis to characterize electromigration , 1983 .

[73]  S. R. Shatynski,et al.  Electromigration in sputtered Al-Cu thin films , 1983 .

[74]  E. Kinsbron,et al.  Electromigration transport mobility associated with pulsed direct current in fine‐grained evaporated Al‐0.5%Cu thin films , 1983 .

[75]  Rolf E. Hummel,et al.  New insights on the reversal of the site of electromigration failure in gold films doped with alkali , 1983 .

[76]  E. Kinsbron,et al.  Electromigration‐induced failure by edge displacement in fine‐line aluminum‐0.5% copper thin film conductors , 1983 .

[77]  K.P. Rodbell,et al.  A new method for detecting electromigration failure in VLSI metallization , 1984, IEEE Journal of Solid-State Circuits.

[78]  J. D. Reimer.  Summary Abstract: The effects of contaminants on aluminum film properties , 1984 .

[79]  Enrico Zanoni,et al.  Failures induced by electromigration in ECL 100k devices , 1984 .

[80]  Electromigration in Double-Layer Metallization , 1985, IEEE Transactions on Reliability.

[81]  In‐Source Al‐0.5%Cu Metallization for CMOS Devices , 1985 .

[82]  Koch,et al.  1/f noise and grain-boundary diffusion in aluminum and aluminum alloys. , 1985, Physical review letters.

[83]  L. E. Felton,et al.  Compensating effects in electromigration kinetics , 1985 .

[84]  G. Gurp,et al.  Measurement of thermomigration in thin metal films , 1985 .

[85]  D. H. Norbury,et al.  Effects of composition and structure on electromigration kinetics in aluminum‐alloy thin films , 1985 .

[86]  B. Neri,et al.  Electromigration detection by means of low-frequency noise measurements in thin-film interconnections , 1985, IEEE Electron Device Letters.

[87]  James R. Lloyd,et al.  A model for conductor failure considering diffusion concurrently with electromigration resulting in a current exponent of 2 , 1986 .

[88]  I. Kiryushin,et al.  Stress relaxation in thin aluminium films , 1986 .

[89]  S. Subramanian,et al.  Comparison of Predictive Methods for Analysis of Electromigration , 1987 .

[90]  J. Mandel,et al.  Reproducibility of electromigration measurements , 1987, IEEE Transactions on Electron Devices.

[91]  Electromigration of silicon and phosphorus in tantalum polycide interconnections , 1987, IEEE Transactions on Electron Devices.

[92]  A. Garulli,et al.  Correlation between resistance behavior and mass transport in Al–Si/Ti multilayer interconnects , 1987 .

[93]  Kenji Hinode,et al.  Stress‐induced grain boundary fractures in Al–Si interconnects , 1987 .

[94]  Robert E. Jones,et al.  Stress analysis of encapsulated fine‐line aluminum interconnect , 1987 .

[95]  B. Neri,et al.  Electromigration and low-frequency resistance fluctuations in aluminum thin-film interconnections , 1987, IEEE Transactions on Electron Devices.

[96]  J. W. McPherson,et al.  A model for stress‐induced metal notching and voiding in very large‐scale‐integrated Al–Si (1%) metallization , 1987 .

[97]  P. Flinn,et al.  Measurement and Interpretation of stress in aluminum-based metallization as a function of thermal history , 1987, IEEE Transactions on Electron Devices.

[98]  J. A. Schwarz.  Distributions of activation energies for electromigration damage in thin‐film aluminum interconnects , 1987 .

[99]  J. R. Lloyd,et al.  Study of Electromigration-Induced Resistance and Resistance Decay in A1 Thin Film Conductors , 1987, 25th International Reliability Physics Symposium.

[100]  H. Schafft.  Thermal analysis of electromigration test structures , 1987, IEEE Transactions on Electron Devices.

[101]  R. Koch,et al.  Effect of hydrogen on electromigration and 1/f noise in gold films , 1987 .

[102]  Larry Smith,et al.  A new wafer-level isothermal Joule-heated electromigration test for rapid testing of integrated-circuit interconnect , 1987 .

[103]  F. Fantini,et al.  Degradation mechanisms induced by high current density in Al-gate GaAs MESFET's , 1987, IEEE Transactions on Electron Devices.

[104]  S. Murarka,et al.  Dopant redistribution in silicide-silicon and silicide-polycrystalline silicon bilayered structures , 1987 .

[105]  J. A. Schwarz.  Effect of temperature on the variance of the log‐normal distribution of failure times due to electromigration damage , 1987 .

[106]  Massimo Vanzi,et al.  Electromigration effects in power MESFET rectifying and ohmic contacts , 1987 .

[107]  I. Yamada,et al.  Electromigration behavior of ionized cluster beam deposited aluminum films on SiO2 , 1988 .

[108]  J. Harrison,et al.  A simulation model for electromigration in fine-line metallization of integrated circuits due to repetitive pulsed currents , 1988 .

[109]  J.W.C. de Vries,et al.  Temperature and thickness dependence of the resistivity of thin polycrystalline aluminium, cobalt, nickel, palladium, silver and gold films , 1988 .

[110]  E. Broadbent,et al.  Electromigration-induced short-circuit failure in aluminum underlaid with chemically vapor deposited tungsten , 1988 .

[111]  Bruno Neri,et al.  Noise measurements in thin‐film interconnections: A nondestructive technique to characterize electromigration , 1988 .

[112]  J. G. Cottle,et al.  Activation energies associated with current noise of thin metal films , 1988 .

[113]  Electromigration on oxide steps , 1988 .

[114]  Che-yu Li,et al.  Analysis of thermal stress‐induced grain boundary cavitation and notching in narrow Al‐Si metallizations , 1988 .

[115]  J. Towner,et al.  The deposition and film properties of reactively sputtered titanium nitride , 1988 .

[116]  Bruno Neri,et al.  A study of electromigration in aluminum and aluminum-silicon thin film resistors using noise technique , 1989 .

[117]  F. d'Heurle,et al.  Note on the origin of intrinsic stresses in films deposited via evaporation and sputtering , 1989 .

[118]  K. F. Poole,et al.  RELIANT: a reliability analysis tool for VLSI interconnect , 1989 .

[119]  H. H. Hoang,et al.  Electromigration early‐failure distribution , 1989 .

[120]  Rolf E. Hummel,et al.  On the electromigration failure under pulsed conditions , 1989 .

[121]  Fausto Fantini,et al.  On the validity of the resistometric technique in electromigration studies of narrow stripes , 1989 .

[122]  A. Scorzoni,et al.  Electromigration and Matthiessen's rule: Experiments on non-passivated Al-1%Si films , 1990 .

[123]  A. Lodder,et al.  Momentum-balance considerations in electromigration revisited , 1990 .

[124]  M. Vanzi,et al.  A failure analysis oriented e-beam test system , 1990 .

[125]  R. E. Somekh,et al.  Electromigration and mechanical stress in aluminium conductor tracks passivated by anodisation , 1990 .

[126]  I. Kiryushin,et al.  Electromigration threshold of thin-film conductors , 1990 .

[127]  E. Cuddihy,et al.  Healing of voids in the aluminum metallization of integrated circuit chips , 1990 .

[128]  Carl V. Thompson,et al.  Electromigration-induced failures in interconnects with bimodal grain size distributions , 1990 .

[129]  Chenming Hu,et al.  Projecting interconnect electromigration lifetime for arbitrary current waveforms , 1990 .

[130]  Two different methods of determining electromigration parameters associated with resistance change , 1990 .

[131]  Chien Chiang,et al.  X‐ray diffraction determination of the effect of various passivations on stress in metal films and patterned lines , 1990 .

[132]  Gian Carlo Cardinali,et al.  A resistometric method to characterize electromigration at the wafer level , 1990 .

[133]  J. R. Lloyd,et al.  The electromigration failure distribution: The fine‐line case , 1991 .

[134]  A. Scorzoni,et al.  Interaction between electromigration and mechanical-stress-induced migration; New insights by a simple, wafer-level resistometric technique , 1991 .

[135]  Bruno Neri,et al.  Variations of temperature coefficient and noise in thin Al and Al/Si resistors subjected to high current density , 1991 .

[136]  Roberto Saletti,et al.  Ultra low-noise preamplifier for low-frequency noise measurements in electron devices , 1991 .