Visualization and analysis of the impinging spray and combustion characteristics in a lateral swirl combustion system (LSCS)

[1]  K. Nishida,et al.  Droplets velocity and diameter variations of wall impinging spray created by slicer , 2021 .

[2]  Hongming Xu,et al.  Investigation on combustion characteristics of cyclopentanol/diesel fuel blends in an optical engine , 2020 .

[3]  Xiaolu Li,et al.  Verifying the wall-flow-guided assumption of the lateral swirl combustion system in DI diesel engines , 2020 .

[4]  Tiegang Fang,et al.  Soot characteristics of high-reactivity gasoline under compression-ignition conditions using a gasoline direct injection (GDI) piezoelectric fuel injector , 2020, Fuel.

[5]  Karthik Nithyanandan,et al.  An optical investigation of substitution rates on natural gas/diesel dual-fuel combustion in a diesel engine , 2020 .

[6]  I. Denbratt,et al.  Role of fuel properties and piston shape in influencing soot oxidation in heavy-duty low swirl diesel engine combustion , 2019, Fuel.

[7]  L. Fan,et al.  Experimental research on the effect of reflected shock waves on the evolution of a high-pressure diesel spray , 2019, Experimental Thermal and Fluid Science.

[8]  I. Denbratt,et al.  Role of Piston Bowl Shape to Enhance Late-Cycle Soot Oxidation in Low-Swirl Diesel Combustion , 2019, SAE International Journal of Engines.

[9]  Haozhong Huang,et al.  Potential improvement in particulate matter’s emissions reduction from diesel engine by addition of PODE and injection parameters , 2019, Applied Thermal Engineering.

[10]  K. Nishida,et al.  Characteristics of fuel evaporation, mixture formation and combustion of 2D cavity impinging spray under high-pressure split injection , 2018, Fuel.

[11]  Xiang-rong Li,et al.  Effects of lateral swirl combustion chamber geometries on the combustion and emission characteristics of DI diesel engines and a matching method for the combustion chamber geometry , 2018, Fuel.

[12]  Wei Du,et al.  Effects of injection pressure on spray structure after wall impingement , 2018 .

[13]  T. Furuhata,et al.  Experimental investigation on velocity inside a diesel spray after impingement on a wall , 2017 .

[14]  Xiang-rong Li,et al.  Mixing and combustion mechanisms within lateral swirl combustion system (LSCS) in a DI diesel engine , 2017 .

[15]  Fushui Liu,et al.  Effects of injection pressure on diesel sprays in constant injection mass condition , 2017 .

[16]  Xiang-rong Li,et al.  The influence of pilot-main injection matching on DI diesel engine combustion using an endoscopic visualization system , 2017 .

[17]  A. Agarwal,et al.  In-cylinder combustion visualization of Jatropha straight vegetable oil and mineral diesel using high temperature industrial endoscopy for spatial temperature and soot distribution , 2016 .

[18]  Xiang-rong Li,et al.  Effect of split injections coupled with swirl on combustion performance in DI diesel engines , 2016 .

[19]  Xu He,et al.  Experimental research on the diffusion flame formation and combustion performance of forced swirl combustion system for DI diesel engines , 2015 .

[20]  J. Benajes,et al.  In-cylinder soot radiation heat transfer in direct-injection diesel engines , 2015 .

[21]  Tiegang Fang,et al.  Measurements of soot temperature and KL factor for spray combustion of biomass derived renewable fuels , 2015 .

[22]  K. Nishida,et al.  Characteristics of Diesel Spray Flame under Flat Wall Impinging Condition --LAS, OH* Chemiluminescence and Two Color Pyrometry Results , 2014 .

[23]  S. Moon,et al.  Mixture condition, combustion and sooting characteristics of ethanol–diesel blends in diffusion flames under various injection and ambient conditions , 2013 .

[24]  Olawole Abiola Kuti,et al.  Effects of ultra-high injection pressure and micro-hole nozzle on flame structure and soot formation of impinging diesel spray , 2011 .

[25]  Su Han Park,et al.  Effects of dimethyl-ether (DME) spray behavior in the cylinder on the combustion and exhaust emissions characteristics of a high speed diesel engine , 2010 .

[26]  J. Huh,et al.  Diesel Spray Impingement Behavior and Adhering Fuel on a Recessed Wall , 2003 .

[27]  Yiqiang Pei,et al.  A Compound Technology for HCCI Combustion in a DI Diesel Engine Based on the Multi-Pulse Injection and the BUMP Combustion Chamber , 2003 .

[28]  K. Nishida,et al.  Characteristics of wall-jet vortex development during fuel spray impinging on flat-wall under cross-flow conditions , 2022, Fuel.

[29]  K. Nishida,et al.  Diesel spray and combustion of multi-hole injectors with micro-hole under ultra-high injection pressure – Non-evaporating spray characteristics , 2021 .

[30]  Liu Fu-shui,et al.  Research on energy distributions of the lateral swirl combustion system in DI diesel engines , 2019, Fuel.