Fatigue damage model based on the natural frequency changes for spot-welded joints

On the basis of FEM analysis, the variation of natural frequency during crack propagation process was investigated for single-spot and double-spots tensile-shear spot-welded specimens. The crack area was used to define the fatigue damage, with which established the relationship between damage area and natural frequency ratio. The residual fatigue life of specimen undergone a certain fatigue damage was predicted by means of the damage evolution principle of damage mechanics. The results showed that the proposed damage parameter can describe the fatigue process for spot-welded joints.

[1]  M. Yuen A NUMERICAL STUDY OF THE EIGENPARAMETERS OF A DAMAGED CANTILEVER , 1985 .

[2]  Robert D. Adams,et al.  The location of defects in structures from measurements of natural frequencies , 1979 .

[3]  K. L. Jerina,et al.  Material damping in 6061-T6511 aluminium to assess fatigue damage , 2003 .

[4]  R. B. Testa,et al.  Modal Analysis for Damage Detection in Structures , 1991 .

[5]  Arun Kumar Pandey,et al.  Damage detection from changes in curvature mode shapes , 1991 .

[6]  Mark E. Barkey,et al.  Analysis of fatigue crack behaviour based on dynamic response simulations and experiments for tensile-shear spot-welded joints , 2006 .

[7]  Angel C. Aparicio,et al.  Structural Damage Identification from Dynamic‐Test Data , 1994 .

[8]  A. Paolozzi,et al.  Detection of Debonding Damage in a Composite Plate through Natural Frequency Variations , 1990 .

[9]  Nenad Bićanić,et al.  Damage identification in framed structures using natural frequencies , 1997 .

[10]  Mark E. Barkey,et al.  Fatigue Crack Identification in Tensile-Shear Spot Welded Joints by Dynamic Response Characteristics , 2005 .

[11]  Teik C. Lim,et al.  Effect of fatigue damage on the dynamic response frequency of spot-welded joints , 2003 .

[12]  O. S. Salawu Detection of structural damage through changes in frequency: a review , 1997 .

[13]  Mark E. Barkey,et al.  Fatigue cracking and its influence on dynamic response characteristics of spot welded specimens , 2004 .

[14]  C. King,et al.  Dynamic Structural Properties of Cable‐Stayed Tampico Bridge , 1991 .

[15]  Qin Quan,et al.  Damage detection of suspension bridges , 1998 .

[16]  Robert D. Adams,et al.  A Vibration Technique for Non-Destructively Assessing the Integrity of Structures: , 1978 .