A comprehensive method for the contact detection of a translational clearance joint and dynamic response after its application in a crank-slider mechanism

[1]  J. Yorke,et al.  Period Three Implies Chaos , 1975 .

[2]  M. Feigenbaum Quantitative universality for a class of nonlinear transformations , 1978 .

[3]  R. S Haines,et al.  Survey: 2-dimensional motion and impact at revolute joints , 1980 .

[4]  F. Moon Experiments on Chaotic Motions of a Forced Nonlinear Oscillator: Strange Attractors , 1980 .

[5]  H. Iida,et al.  A Dynamic Analysis of the Plane Crank-and-Rocker Mechanisms with Clearances , 1980 .

[6]  R. S. Haines A Theory of Contact Loss at Resolute Joints with Clearance , 1980 .

[7]  A. Wolf,et al.  Determining Lyapunov exponents from a time series , 1985 .

[8]  M. T. Bengisu,et al.  A Theoretical and Experimental Investigation of Contact Loss in the Clearances of a Four-Bar Mechanism , 1986 .

[9]  Brian S. Thompson,et al.  A Theoretical and Experimental Investigation of the Dynamic Response of a Slider-Crank Mechanism With Radial Clearance in the Gudgeon-Pin Joint , 1990 .

[10]  Ahmet S. Yigit,et al.  SPRING-DASHPOT MODELS FOR THE DYNAMICS OF A RADIALLY ROTATING BEAM WITH IMPACT , 1990 .

[11]  L. Seneviratne,et al.  Chaotic behaviour exhibited during contact loss in a clearance joint of a four-bar mechanism , 1992 .

[12]  M. Rosenstein,et al.  A practical method for calculating largest Lyapunov exponents from small data sets , 1993 .

[13]  Peter Ravn,et al.  A Continuous Analysis Method for Planar Multibody Systems with Joint Clearance , 1998 .

[14]  A. Hübler,et al.  Adaptation to the edge of chaos in the self-adjusting logistic map. , 2000, Physical review letters.

[15]  Olivier A. Bauchau,et al.  Modeling of joints with clearance in flexible multibody systems , 2001 .

[16]  Linhong Ji,et al.  Investigation on the Dynamic Performance of the Tripod-Ball Sliding Joint with Clearance in a CRANK-SLIDER Mechanism. Part 1. Theoretical and Experimental Results , 2002 .

[17]  Jorge Ambrósio,et al.  Revolute joints with clearance in multibody systems , 2004 .

[18]  Liu Caishan Dynamic Simulation and Kinetic Description of Revolute Joint with Spatial Clearance , 2005 .

[19]  J. C. García Orden,et al.  Analysis of Joint Clearances in Multibody Systems , 2005 .

[20]  Caishan Liu,et al.  The compliance contact model of cylindrical joints with clearances , 2005 .

[21]  Jorge Ambrósio,et al.  Spatial revolute joints with clearances for dynamic analysis of multi-body systems , 2006 .

[22]  A. Loskutov,et al.  Dynamical chaos: systems of classical mechanics , 2007 .

[23]  Yan-Hui Wang,et al.  Dynamic modeling of flexible multibody systems with parameter uncertainty , 2008 .

[24]  Lotfi Romdhane,et al.  Dynamic analysis of a flexible slider-crank mechanism with clearance , 2008 .

[25]  Selçuk Erkaya,et al.  Investigation on effect of joint clearance on dynamics of four-bar mechanism , 2009 .

[26]  Jorge Ambrósio,et al.  Development of a planar multibody model of the human knee joint , 2010 .

[27]  Shuming Gao,et al.  Detachment avoidance of joint elements of a robotic manipulator with clearances based on trajectory planning , 2010 .

[28]  Selçuk Erkaya,et al.  Experimental investigation of joint clearance effects on the dynamics of a slider-crank mechanism , 2010 .

[29]  Mihai Dupac,et al.  Dynamic analysis of a flexible linkage mechanism with cracks and clearance , 2010 .

[30]  Jorge Ambrósio,et al.  Numerical and experimental investigation on multibody systems with revolute clearance joints , 2011 .

[31]  Margarida F. Machado,et al.  A new model for dry and lubricated cylindrical joints with clearance in spatial flexible multibody systems , 2011 .

[32]  Bing Li,et al.  Dynamic Model and Experimental Research on Pitch Mechanism of Gun with Clearances , 2011 .

[33]  Shaoze Yan,et al.  Kinematic accuracy analysis of flexible mechanisms with uncertain link lengths and joint clearances , 2011 .

[34]  Onesmus Muvengei,et al.  Dynamic analysis of planar rigid-body mechanical systems with two-clearance revolute joints , 2013 .

[35]  Shaoze Yan,et al.  Complexity evaluation of nonlinear dynamic behavior of mechanisms with clearance joints by using the fractal method , 2014 .

[36]  Qi Wang,et al.  Modeling and simulation of a frictional translational joint with a flexible slider and clearance , 2016 .

[37]  H. M. Daniali,et al.  Reducing the undesirable effects of joints clearance on the behavior of the planar 3-RRR parallel manipulators , 2016 .

[38]  Ke Wang,et al.  Dynamic analysis and optimization design of a planar slider–crank mechanism with flexible components and two clearance joints , 2016 .

[39]  Jie Liu,et al.  Theoretical and Experimental Identification of Clearance Nonlinearities for a Continuum Structure , 2016 .

[40]  Kwun-Lon Ting,et al.  Clearance-induced output position uncertainty of planar linkages with revolute and prismatic joints , 2017 .

[41]  Janko Slavič,et al.  A validated model for a pin-slot clearance joint , 2017 .

[42]  Jun Wang,et al.  Clearance-Induced Position Uncertainty of Planar Linkages and Parallel Manipulators , 2017 .

[43]  Filipe Marques,et al.  An enhanced formulation to model spatial revolute joints with radial and axial clearances , 2017 .

[44]  Filipe Marques,et al.  Modeling and analysis of friction including rolling effects in multibody dynamics: a review , 2018, Multibody System Dynamics.

[45]  Qi Wang,et al.  Modeling and simulation of planar multibody systems with revolute clearance joints considering stiction based on an LCP method , 2018, Mechanism and Machine Theory.

[46]  Qiang Tian,et al.  A comprehensive survey of the analytical, numerical and experimental methodologies for dynamics of multibody mechanical systems with clearance or imperfect joints , 2018 .

[47]  Shaoze Yan,et al.  Dynamic analysis of planar mechanical systems considering stick-slip and Stribeck effect in revolute clearance joints , 2018, Nonlinear Dynamics.

[48]  Selçuk Erkaya,et al.  Experimental investigation of flexible connection and clearance joint effects on the vibration responses of mechanisms , 2018 .

[49]  Qingmin Liao,et al.  A methodology for modeling and simulating frictional translational clearance joint in multibody systems including a flexible slider part , 2019 .

[50]  Zheng Wei,et al.  Non-probabilistic kinematic reliability analysis of planar mechanisms with non-uniform revolute clearance joints , 2019, Mechanism and Machine Theory.