Analysis and Performance of Dispensed and Screen Printed Front Side Contacts at Cell and Module Level

[1]  Jan Specht,et al.  Paste Rheology Correlating With Dispensed Finger Geometry , 2014, IEEE Journal of Photovoltaics.

[2]  Y. Ohshita,et al.  30μm fine-line printing for solar cells , 2013, 2013 IEEE 39th Photovoltaic Specialists Conference (PVSC).

[3]  Markus König,et al.  Process Development for a High-Throughput Fine Line Metallization Approach Based on Dispensing Technology , 2013 .

[4]  Daniel Biro,et al.  Ultrafine front side metallization on silicon solar cells by industrial dispensing technology , 2014 .

[5]  Holger Neuhaus,et al.  Fine line metallization by coextrusion technology for next generation solar cells , 2014 .

[6]  Stefan W. Glunz,et al.  Analysis of the Optical Properties of Screen-Printed and Aerosol-Printed and Plated Fingers of Silicon Solar Cells , 2008 .

[7]  Weiming Zhang,et al.  An improved mathematical modeling to simulate metallization screen pattern trend for silicon solar cell , 2013, Photovoltaic Specialists Conference.

[8]  Martin A. Green,et al.  A new method for accurate measurements of the lumped series resistance of solar cells , 1993, Conference Record of the Twenty Third IEEE Photovoltaic Specialists Conference - 1993 (Cat. No.93CH3283-9).

[9]  A. Rohatgi,et al.  The impact of cell design on light induced degradation in p-type silicon solar cells , 2011, 2011 37th IEEE Photovoltaic Specialists Conference.

[10]  Markus König,et al.  Optimizing Fine Line Dispensed Contact Grids , 2014 .

[11]  A. Goetzberger,et al.  Crystalline Silicon Solar Cells , 1998 .