Transforming the food-water-energy-land-economic nexus of plasticulture production through compact bed geometries

Abstract Raised-bed plasticulture, an intensive production system used around the world for growing high-value crops (e.g., fresh market vegetables), faces a water-food nexus that is actually a food-water-energy-land-economic nexus. Plasticulture represents a multibillion dollar facet of the United States crop production value annually and must become more efficient to be able to produce more on less land, reduce water demands, decrease impacts on surrounding environments, and be economically-competitive. Taller and narrower futuristic beds were designed with the goal of making plasticulture more sustainable by reducing input requirements and associated wastes (e.g., water, nutrients, pesticides, costs, plastics, energy), facilitating usage of modern technologies (e.g., drip-based fumigation), improving adaptability to a changing climate (e.g., flood protection), and increasing yield per unit area. Compact low-input beds were analyzed against conventional beds for the plasticulture production of tomato ( Solanum lycopersicum ), an economically-important crop, using a systems approach involving field measurements, vadose-zone modeling (HYDRUS), and production analysis. Three compact bed geometries, 61 cm (width) × 25 cm (height), 45 cm × 30 cm, 41 cm × 30 cm, were designed and evaluated against a conventional 76 cm × 20 cm bed. A two-season field study was conducted for tomato in the ecologically-sensitive and productive Everglades region of Florida. Compact beds did not statistically impact yield and were found to reduce: 1) production costs by $150–$450/ha; 2) leaching losses by up to 5% (1 cm/ha water, 0.33 kg/ha total nitrogen, 0.05 kg/ha total phosphorus); 3) fumigant by up to 47% (48 kg/ha); 4) plasticulture's carbon footprint by up to 10% (1711 kg CO 2 -eq/ha) and plastic waste stream by up to 13% (27 kg/ha); 5) flood risks and disease pressure by increasing field's soil water storage capacity by up to 33% (≈1 cm); and 6) field runoff by 0.48–1.40 cm (51–76%) based on HYDRUS model simulations of 10-year, 2-h storm events in other major tomato production regions of California and Virginia. Re-designing the bed geometries in plasticulture production systems to be more compact is an example of win-win production optimization not only for traditional farms in rural areas but also for urban and peri-urban farms which are located closer to city centers. Compact beds could enable more plants per unit area, thus requiring less land area for the same production. Needing less area facilitates urban and peri-urban farming where land values can be high. Urban and peri-urban farming has several benefits, including reductions in transportation energy as production is closer to market and the ability for city wastewater to be reused for irrigation instead of freshwater withdrawals. Compact beds allow plasticulture to have smaller water, chemical, energy, carbon, waste, and economic footprints without impacting production. Improving agricultural systems in this way could enhance economic and environmental viability, which is essential for a sustainable food-water-energy-land-economic nexus.

[1]  S. El‐Swaify,et al.  Runoff and soil erosion as affected by plastic mulch in a Hawaiian pineapple field , 1999 .

[2]  Alessandro Flammini,et al.  The Contribution of Agriculture, Forestry and other Land Use activities to Global Warming, 1990–2012 , 2015, Global change biology.

[3]  J. Famiglietti.  The global groundwater crisis , 2014 .

[4]  B. Mcneal,et al.  Specific-gravity effects on fertilizer leaching from surface sources to shallow water tables , 1996 .

[5]  Guangyao Wang,et al.  Timing of Drip Irrigation Initiation Affects Irrigation Water Use Efficiency and Yield of Bell Pepper under Plastic Mulch , 2008 .

[6]  B. Hanson,et al.  Drip Irrigation of Tomato and Cotton Under Shallow Saline Ground Water Conditions , 2006 .

[7]  V. M. Salokhe,et al.  Water requirement of drip irrigated tomatoes grown in greenhouse in tropical environment , 2005 .

[8]  Paul J. A. Withers,et al.  Agriculture and Eutrophication: Where Do We Go from Here? , 2014 .

[9]  Bernd Huwe,et al.  Simulation of Runoff Patterns and Soil Erosion on Mountainous Farmland with and without Plastic-Covered Ridge-Furrow Cultivation in South Korea , 2013 .

[10]  Demetres Briassoulis,et al.  Critical Review of Norms and Standards for Biodegradable Agricultural Plastics Part Ι. Biodegradation in Soil , 2010 .

[11]  M. Wetzstein,et al.  Environmental Impacts from Pesticide Use: A Case Study of Soil Fumigation in Florida Tomato Production , 2011, International journal of environmental research and public health.

[12]  Gary A. Clark,et al.  VEGETABLE PRODUCTION ON VARIOUS BED WIDTHS USING DRIP IRRIGATION , 1992 .

[13]  Thomas A. Obreza,et al.  Development and Evaluation of Soil Moisture-Based Seepage Irrigation Management for Water Use and Quality , 2007 .

[14]  Seongjoon Kim,et al.  Evaluation of executable best management practices in Haean highland agricultural catchment of South Korea using SWAT , 2017 .

[15]  S. Shukla,et al.  Water and nitrogen management effects on water and nitrogen fluxes in Florida Flatwoods. , 2011, Journal of environmental quality.

[16]  C. Miles,et al.  Degradation of Potentially Biodegradable Plastic Mulch Films at Three Diverse U.S. Locations , 2014 .

[17]  R. Horton.  The Rôle of infiltration in the hydrologic cycle , 1933 .

[18]  F. Roka,et al.  Agricultural Labor and Immigration Reform , 2015 .

[19]  A. Klute,et al.  Physical and mineralogical methods , 1986 .

[20]  Lynne P. Heighton,et al.  Runoff loss of pesticides and soil: a comparison between vegetative mulch and plastic mulch in vegetable production systems. , 2001, Journal of environmental quality.

[21]  C. Fraisse,et al.  Quantification of greenhouse gas emissions from open field-grown Florida tomato production , 2012 .

[22]  Michael D. Dukes,et al.  Tomato yield, biomass accumulation, root distribution and irrigation water use efficiency on a sandy soil, as affected by nitrogen rate and irrigation scheduling , 2009 .

[23]  S. Fennimore,et al.  Weed Control in Strawberry Provided by Shank- and Drip-applied Methyl Bromide Alternative Fumigants , 2003 .

[24]  Jirka Šimůnek,et al.  Leaching with Subsurface Drip Irrigation under Saline, Shallow Groundwater Conditions , 2008 .

[25]  C. Masek.  Adapting the SCS method for estimating runoff in shallow water table environments , 2002 .

[26]  I. Sanchez-Cohen,et al.  Water use efficiency and productivity of habanero pepper (Capsicum chinense Jacq.) based on two transplanting dates. , 2015, Water science and technology : a journal of the International Association on Water Pollution Research.

[27]  Carmela Sica,et al.  PLASTIC MATERIALS IN EUROPEAN AGRICULTURE: ACTUAL USE AND PERSPECTIVES , 2012 .

[28]  S. Olson,et al.  Movement and biological activity of drip-applied 1,3-dichloropropene and chloropicrin in raised mulched beds in the southeastern USA. , 2004, Pest management science.

[29]  James W. Jones,et al.  Growth and canopy characteristics of field-grown tomato. , 2000 .

[30]  T. Dunne,et al.  Relation of field studies and modeling in the prediction of storm runoff , 1983 .

[31]  M. Unger,et al.  Runoff from tomato cultivation in the estuarine environment: biological effects of farm management practices , 2004 .

[32]  Nathan Holt,et al.  Transforming the Plasticulture Production System through Novel Bed Geometry Design , 2016 .

[33]  K. Trenberth.  Changes in precipitation with climate change , 2011 .

[34]  C. Wilcox,et al.  Plastic waste inputs from land into the ocean , 2015, Science.

[35]  Demetres Briassoulis,et al.  Review, mapping and analysis of the agricultural plastic waste generation and consolidation in Europe , 2013, Waste management & research : the journal of the International Solid Wastes and Public Cleansing Association, ISWA.

[36]  W. J. Lamont,et al.  What Are the Components of a Plasticulture Vegetable System , 1996 .

[37]  Feike J. Leij,et al.  The RETC code for quantifying the hydraulic functions of unsaturated soils , 1992 .

[38]  T. Trout,et al.  Application of alternative fumigants through drip irrigation systems. , 2002, Phytopathology.

[39]  David A. Robinson,et al.  Plastic mulch and nitrogen fertigation in growing vegetables modify soil temperature, water and nitrate dynamics: Experimental results and a modeling study , 2016 .

[40]  Fouad H. Jaber,et al.  Recharge, upflux and water table response for shallow water table conditions in southwest Florida , 2006 .

[41]  W. J. Lamont.  Plastics: Modifying the Microclimate for the Production of Vegetable Crops , 2005 .

[42]  O. Frör,et al.  Plastic mulching in agriculture. Trading short-term agronomic benefits for long-term soil degradation? , 2016, The Science of the total environment.