Microstructural characterization and mechanical properties of TIG weld joint made by forged Ti–4Al–2V alloy

[1]  Kamlesh Kumar,et al.  Microstructure evolution and metallurgical characteristic of bead-on-plate TIG welding of Ti-6Al-4V alloy , 2019, Journal of Materials Processing Technology.

[2]  Yonghua Shi,et al.  Microstructure, texture, and mechanical properties of Ti-6Al-4V joints by K-TIG welding , 2019, Journal of Manufacturing Processes.

[3]  I. Mishin,et al.  Superplastic deformation behavior of Ti-4Al-2V alloy governed by its structure and precipitation phase evolution , 2018 .

[4]  Pradeep Kumar,et al.  Autogenous Tungsten Inert Gas and Gas Tungsten Arc With Filler Welding of Dissimilar P91 and P92 Steels , 2018 .

[5]  Julfikar Haider,et al.  A comparative study of pulsed laser and pulsed TIG welding of Ti-5Al-2.5Sn titanium alloy sheet , 2017 .

[6]  Jianxin Zhang,et al.  Microstructure and mechanical properties of Ti6321 alloy welded joint by GTAW , 2015 .

[7]  F. Liu,et al.  Influence of texture on strain localization in stir zone of friction stir welded titanium , 2015 .

[8]  Hejun Li,et al.  Ablative and Mechanical Properties of C/C–ZrC Composites Prepared by Precursor Infiltration and Pyrolysis Process , 2015 .

[9]  Gaoyang Mi,et al.  A coupled thermal and metallurgical model for welding simulation of Ti-6Al-4V alloy , 2014 .

[10]  J. M. Amaya,et al.  Comparison of Ti-5Al-5V-5Mo-3Cr Welds Performed by Laser Beam, Electron Beam and Gas Tungsten Arc Welding , 2013 .

[11]  R. Rotinat,et al.  Influence of the microstructural changes and induced residual stresses on tensile properties of wrought magnesium alloy friction stir welds , 2012 .

[12]  Jianxun Zhang,et al.  Microstructural evolution of fusion zone in laser beam welds of pure titanium , 2012 .

[13]  Wu Zhen-hua,et al.  Automatic horizontal position welding technology of aluminum alloy used in railway vehicles , 2012 .

[14]  J. Liao,et al.  Mechanical properties and strengthening mechanisms in laser beam welds of pure titanium , 2011 .

[15]  A. Ebrahimi,et al.  Effect of oxygen boost diffusion treatment on fatigue behavior of Ti―4Al―2V alloy , 2011 .

[16]  R. Fonda,et al.  Texture development in near-α Ti friction stir welds , 2010 .

[17]  Yanliang Huang.  A fracture probability competition mechanism of stress corrosion cracking , 2009 .

[18]  A. Short.  Gas tungsten arc welding of α + β titanium alloys: a review , 2009 .

[19]  Reza Miresmaeili,et al.  Experimental and numerical analyses of residual stress distributions in TIG welding process for 304L stainless steel , 2008 .

[20]  A. Kozlov,et al.  Irradiation behavior of Ti-4Al-2V (ΠT-3B) alloy for ITER blanket modules flexible attachment , 2007 .

[21]  S. Raman,et al.  Correlation of microstructure with mechanical properties of TIG weldments of Ti-6Al-4V made with and without current pulsing , 2007 .

[22]  F. Karimzadeh,et al.  EFFECT OF MICROPLASMA ARC WELDING PROCESS PARAMETERS ON GRAIN GROWTH AND POROSITY DISTRIBUTION OF THIN SHEET Ti6AL4V ALLOY WELDMENT , 2005 .

[23]  Z. G. Wang,et al.  Characterization of oxide layers on Ti–2Al–2.5Zr and Ti–4Al–2V alloys oxidized at 300 °C in a neutral water steam , 2004 .

[24]  W. Evans,et al.  Impact of texture on mechanical properties in an advanced titanium alloy , 2001 .

[25]  G. Lütjering,et al.  Comparison of the fatigue and fracture of α+β and β titanium alloys , 2001 .

[26]  H. J. Rack,et al.  Phase transformations during cooling in α+β titanium alloys , 1998 .