Meshing Performance Analysis of New Non-Zero-Positive Modification Spiral Bevel Gear

For non-zero-modification spiral bevel gear, its machining parameters could be designed with big contact ratio by Local Synthesis. This design method could make up the shortage of low coincidence degree resulted by increasing mesh angle in the non-zero-positive transmission designing. Taking an example, according to comparing the new with conventional design simulation results, the max root tensile stress of pinion was reduced by 28.36%, and the max root compressive stress was reduced by 23.31%, and the max tooth surface contact stress was reduced by3.5%, and the root stress of gear was a bit decreased under the same load conditions. The conclusions showed that the pinion bending strength was improved obviously, and new tooth profile design and its machining parameters made gear pair possess higher life and reliability.