From Maxwell Garnett to Debye Model for Electromagnetic Simulation of Composite Dielectrics Part I: Random Spherical Inclusions

A semianalytical approach to obtain an equivalent Debye frequency dependence of effective permittivity for biphasic materials with random spherical inclusions from the well-known Maxwell Garnett (MG) mixing rule is proposed. Different combinations of frequency characteristics of mixture phases (host and inclusions) are considered: when at least one of the phases is frequency independent; lossy (with dc conductivity); or with a known single-term Debye frequency dependence. The equivalent Debye models approximate very well the frequency characteristics obtained directly from MG mixing rule. In some cases, there is an exact match between the two models, and a good approximation is achieved in the other cases and is quantified by the feature selective validation technique. The parameters of the derived equivalent Debye model can be employed in full-wave time-domain numerical electromagnetic codes and tools. This will allow for efficient wideband modeling of complex electromagnetic structures containing composite materials with effective dielectric parameters obtained through MG mixing rule.

[1]  J. Garnett,et al.  Colours in Metal Glasses and in Metallic Films , 1904 .

[2]  J. Garnett,et al.  Colours in Metal Glasses and in Metallic Films. , 1904, Proceedings of the Royal Society of London.

[3]  A. Hippel,et al.  Dielectrics and Waves , 1966 .

[4]  J. Kong,et al.  Effective permittivity of dielectric mixtures , 1988 .

[5]  Allen Taflove,et al.  Computational Electrodynamics the Finite-Difference Time-Domain Method , 1995 .

[6]  Lagarkov An,et al.  Electromagnetic properties of composites containing elongated conducting inclusions , 1996 .

[7]  Lagarkov,et al.  Electromagnetic properties of composites containing elongated conducting inclusions. , 1996, Physical review. B, Condensed matter.

[8]  Ari Sihvola,et al.  Electromagnetic mixing formulas and applications , 1999 .

[9]  J. Drewniak,et al.  Representation of permittivity for multiphase dielectric mixtures in FDTD modeling , 2004, 2004 International Symposium on Electromagnetic Compatibility (IEEE Cat. No.04CH37559).

[10]  EFFECTIVE PROPERTIES OF FIBER COMPOSITE MATERIALS , 2004 .

[11]  S. Caorsi,et al.  A Versatile Enhanced Genetic Algorithm for Planar Array Design , 2004 .

[12]  H.-S. Park,et al.  Optimized Design of Radar Absorbing Materials for Complex Targets , 2004 .

[13]  Richard E. DuBroff,et al.  Modeling of Dielectric Mixtures Containing Conducting Inclusions with Statistically Distributed Aspect Ratio , 2006 .

[14]  A. Orlandi,et al.  Feature selective validation (FSV) for validation of computational electromagnetics (CEM). part I-the FSV method , 2006, IEEE Transactions on Electromagnetic Compatibility.

[15]  A. Orlandi,et al.  Feature selective validation (FSV) for validation of computational electromagnetics (CEM). part II- assessment of FSV performance , 2006, IEEE Transactions on Electromagnetic Compatibility.

[16]  R. W. Schwartz,et al.  A Maxwell Garnett Model for Dielectric Mixtures Containing Conducting Particles at Optical Frequencies , 2006 .

[17]  R. W. Schwartz,et al.  Double Statistical Distribution of Conductivity and Aspect Ratio of Inclusions in Dielectric Mixtures at Microwave Frequencies , 2007 .

[18]  Zhi Qi Meng,et al.  Autonomous Genetic Algorithm for Functional Optimization , 2007 .

[19]  T. Weiland,et al.  A practical guide to 3-D simulation , 2008, IEEE Microwave Magazine.

[20]  J. Drewniak,et al.  Modeling of Shielding Composite Materials and Structures for Microwave Frequencies , 2009 .

[21]  R. W. Schwartz,et al.  Prediction of Effective Permittivity of Diphasic Dielectrics as a Function of Frequency , 2009, IEEE Transactions on Dielectrics and Electrical Insulation.

[22]  M. S. Sarto,et al.  Electromagnetic Design and Realization of Innovative Fiber-Reinforced Broad-Band Absorbing Screens , 2009, IEEE Transactions on Electromagnetic Compatibility.

[23]  J. Drewniak,et al.  FDTD modeling of absorbing materials for EMI applications , 2010, 2010 Asia-Pacific International Symposium on Electromagnetic Compatibility.

[24]  A new mixing rule for predicting of frequency-dependent material parameters of composites , 2010, 2010 URSI International Symposium on Electromagnetic Theory.

[25]  Soumya De,et al.  Systematic Analysis and Engineering of Absorbing Materials Containing Magnetic Inclusions for EMC Applications , 2011, IEEE Transactions on Magnetics.