Effects of ultrasonic nanocrystal surface modification on the wear and micropitting behavior of bearing steel in boundary lubricated steel-steel contacts

Abstract An ultrasonic nanocrystal surface modification (UNSM) technique has been used to treat AISI 52100 steel specimens and thrust ball bearing raceways. Tribological performances of untreated specimens were compared to UNSM-treated specimens in reciprocating sliding and rolling/sliding contact under boundary lubricated conditions. Friction and wear coefficients, micropitting, and changes in surface profiles and surface roughness of the specimens were studied. Results showed that UNSM treated specimens had higher wear and micropitting resistance than the untreated specimens. The improvements in wear and micropitting resistance may be attributed to increased surface hardness, refined grain sizes and compressive residual stress near surface region as a result of UNSM treatment. The UNSM technique has been proven to be a powerful tool to improve the durability and tribological performance of contacting surfaces of mechanical components such as bearings, gears, and seals.

[1]  J. Greenwood,et al.  Contact of nominally flat surfaces , 1966, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences.

[2]  Krich Sawamiphakdi,et al.  Solving Elastic Contact Between Rough Surfaces as an Unconstrained Strain Energy Minimization by Using CGM and FFT Techniques , 1999 .

[3]  A. Torrance,et al.  An additive's influence on the pitting and wear of ball bearing steel , 1996 .

[4]  A. Rosen,et al.  On the validity of the hall-petch relationship in nanocrystalline materials , 1989 .

[5]  Shinya Sasaki,et al.  Applying Micro-Texture to Cast Iron Surfaces to Reduce the Friction Coefficient Under Lubricated Conditions , 2007 .

[6]  Zhong Zhou,et al.  Gradient nanostructure and residual stresses induced by Ultrasonic Nano-crystal Surface Modification in 304 austenitic stainless steel for high strength and high ductility , 2014 .

[7]  G. Doll,et al.  Effects of Black Oxide and a WC/a-C:H Coating on the Micropitting of SAE 52100 Bearing Steel , 2015, Tribology Letters.

[8]  In-Gyu Park,et al.  Micro-dimpled surface by ultrasonic nanocrystal surface modification and its tribological effects , 2012 .

[9]  Jian Lu,et al.  Surface nanocrystallization of iron induced by ultrasonic shot peening , 1999 .

[10]  F. D'Errico.  Micropitting Damage Mechanism on Hardened and Tempered, Nitrided, and Carburizing Steels , 2011 .

[11]  Bong-Joong Kim,et al.  Fatigue Performance Improvement in AISI 4140 Steel by Dynamic Strain Aging and Dynamic Precipitation During Warm Laser Shock Peening , 2011 .

[12]  Yukitaka Murakami,et al.  Mechanism of creation of compressive residual stress by shot peening , 1998 .

[13]  M. Medraj,et al.  Effect of ultrasonic nanocrystalline surface modification on the water droplet erosion performance of Ti6Al4V , 2016 .

[14]  Jianxun Zhang,et al.  Effect of ultrasonic nanocrystal surface modification on the fatigue behaviors of plasma-nitrided S45C steel , 2012 .

[15]  Micropitting Performance of Oil Additives in Lubricated Rolling Contacts , 2013 .

[16]  Kathryn L. Harris,et al.  Erratum to: Wear Debris Mobility, Aligned Surface Roughness, and the Low Wear Behavior of Filled Polytetrafluoroethylene , 2015, Tribology Letters.

[17]  Michael M. Khonsari,et al.  The Stribeck Curve: Experimental Results and Theoretical Prediction , 2006 .

[18]  M. Sułek,et al.  Assessment of lubricity of compositions of fuel oil with biocomponents derived from rape-seed , 2010 .

[19]  Yang-ming Chang,et al.  Residual stress measurement by X-ray diffraction , 1972 .

[20]  Chang-Soon Lee,et al.  Effect of Ultrasonic Nanocrytalline Surface Modification on the Microstructural Evolution of Inconel 690 Alloy , 2015 .

[21]  L. Wagner,et al.  Mechanical surface treatments on titanium, aluminum and magnesium alloys , 1999 .

[22]  Y. Lv.  Influence of laser surface melting on the micropitting performance of 35CrMo structural steel gears , 2013 .

[23]  D. Qian,et al.  Surface amorphization of NiTi alloy induced by Ultrasonic Nanocrystal Surface Modification for improved mechanical properties. , 2016, Journal of the mechanical behavior of biomedical materials.

[24]  J. Streator,et al.  A Deterministic Approach to Studying Liquid-Mediated Adhesion Between Rough Surfaces , 2015, Tribology letter.

[25]  Andreas A. Polycarpou,et al.  Friction characteristics of microtextured surfaces under mixed and hydrodynamic lubrication , 2013 .

[26]  R. D. Evans,et al.  Influence of a WC/a-C:H tribological coating on micropitting wear of bearing steel , 2016 .

[27]  Shinya Sasaki,et al.  Effects of ultrasonic nanocrystalline surface modification (UNSM) technique on the tribological behavior of sintered Cu-based alloy☆ , 2014 .

[28]  Ramiro C. Martins,et al.  An approach to the simulation of concurrent gear micropitting and mild wear , 2015 .

[29]  A Oila,et al.  Phase transformations associated with micropitting in rolling/sliding contacts , 2005 .

[30]  G. Morales-Espejel,et al.  Micropitting Modelling in Rolling–Sliding Contacts: Application to Rolling Bearings , 2011 .

[31]  Trevor S. Slack,et al.  A Review of Rolling Contact Fatigue , 2009 .

[32]  Christopher A. Walford,et al.  Wind Turbine Reliability: Understanding and Minimizing Wind Turbine Operation and Maintenance Costs , 2006 .

[33]  Young-Shik Pyoun,et al.  The evaluation of the micro-tracks and micro-dimples on the tribological characteristics of thrust ball bearings. , 2011, Journal of nanoscience and nanotechnology.

[34]  Brian A. Shaw,et al.  Analysis of Micro-Elastohydrodynamic Lubrication and Prediction of Surface Fatigue Damage in Micropitting Tests on Helical Gears , 2013 .

[35]  A. Neville,et al.  Investigation of the effect of a diamine-based friction modifier on micropitting and the properties of tribofilms in rolling-sliding contacts , 2016 .

[36]  G. Morales-Espejel,et al.  The Behavior of Indentation Marks in Rolling–Sliding Elastohydrodynamically Lubricated Contacts , 2011 .

[37]  J. Archard.  Contact and Rubbing of Flat Surfaces , 1953 .

[38]  Michael N Kotzalas,et al.  Tribological advancements for reliable wind turbine performance , 2010, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[39]  A Oila,et al.  Assessment of the factors influencing micropitting in rolling/sliding contacts , 2005 .

[40]  Andrew V. Olver,et al.  Effect of lubricants on micropitting and wear , 2008 .

[41]  B. Gould,et al.  The Influence of Sliding and Contact Severity on the Generation of White Etching Cracks , 2015, Tribology Letters.

[42]  Ramiro C. Martins,et al.  Influence of PAO + ester oil formulations on gear micropitting and efficiency , 2011 .

[43]  Ramiro C. Martins,et al.  Influence of oil formulation on gear micropitting and power loss performance , 2011 .