Nonlinear Model-Based Control of Thin-Film Drying for Continuous Pharmaceutical Manufacturing

This paper considers the model-based control of composition and thickness for a thin-film drying process used in the continuous manufacturing of pharmaceutical tablets. In this nonlinear distributed dynamical system, a drug formulation solution is coated onto a moving surface and then dried to form thin films of approximately 250 μm in thickness. A dynamic optimizer is designed that employs a first-principles process model to simulate the spatial distribution of solvent concentration in the film and the thin film shrinkage during drying. A critical parameter to describe the highly nonlinear dynamics of the thin-film drying is the mutual polymer–solvent diffusion coefficient, which strongly depends on solvent concentration and film temperature. Two optimal control problems are studied for set point tracking of solvent concentration and minimization of energy consumption in the dryer while satisfying various operational and product quality constraints. An unscented Kalman filter is designed to facilitate th...

[1]  K. Vadalia,et al.  Orally Disintegrating Tablets: A Review , 2009 .

[2]  R. LeVeque.  Finite Volume Methods for Hyperbolic Problems: Characteristics and Riemann Problems for Linear Hyperbolic Equations , 2002 .

[3]  Paulo Afonso,et al.  Unscented Kalman Filtering of a Simulated pH System , 2004 .

[4]  D. L. Ma,et al.  Optimal seeding in batch crystallization , 1999 .

[5]  Lorenz T. Biegler,et al.  Improved infeasible path optimization for sequential modular simulators—II: the optimization algorithm , 1985 .

[6]  M. Blanco,et al.  Content uniformity and tablet hardness testing of intact pharmaceutical tablets by near infrared spectroscopy: A contribution to process analytical technologies , 2006 .

[7]  William P. Heath,et al.  Orthogonal functions for cross-directional control of web forming processes , 1996, Autom..

[8]  J. S. Vrentas,et al.  Drying of solvent-coated polymer films , 1994 .

[9]  Zoltan K. Nagy,et al.  Real‐time control of a semi‐industrial fed‐batch evaporative crystallizer using different direct optimization strategies , 2011 .

[10]  Jeffrey K. Uhlmann,et al.  Unscented filtering and nonlinear estimation , 2004, Proceedings of the IEEE.

[11]  D. B. Brooker,et al.  Mathematical Model of the Psychrometric Chart , 1967 .

[12]  Lawrence X. Yu.  Pharmaceutical Quality by Design: Product and Process Development, Understanding, and Control , 2008, Pharmaceutical Research.

[13]  James C. Hung,et al.  Internal Model Control , 2011, Control and Mechatronics.

[14]  Richard D. Braatz,et al.  Cross-directional control of sheet and film processes , 2007, Autom..

[15]  Ferhan Kayihan,et al.  Model predictive control of CD profiles in sheet forming processes using full profile disturbance models identified by adaptive PCA , 1997, Proceedings of the 1997 American Control Conference (Cat. No.97CH36041).

[16]  Patrick Salagnac,et al.  Optimal constrained control of an infrared-convective drying of a polymer aqueous solution , 2009 .

[17]  Matthew L. Tyler,et al.  Estimation of cross-directional properties: Scanning vs. Stationary Sensors , 1995 .

[18]  J. Landlust,et al.  AN INDUSTRIAL MODEL PREDICTIVE CONTROL ARCHITECTURE FOR BATCH CRYSTALLISATION , 2008 .

[19]  Sumeet Sharma,et al.  Pharmaceutical Quality by Design , 2013 .

[20]  J. Fried.  Polymer Science & Technology , 2014 .

[21]  Hassan Hammouri,et al.  Model predictive control during the primary drying stage of lyophilisation , 2010 .

[22]  Ivan Nagy,et al.  Adaptive Cross-Direction Control of Paper Basis Weight , 1990 .

[23]  M. Nagarsenker,et al.  Formulation and Evaluation of Fast Dissolving Films for Delivery of Triclosan to the Oral Cavity , 2008, AAPS PharmSciTech.

[24]  M. Karny,et al.  Modelling, identification and adaptive control of cross-direction basis weight of paper sheets , 1988 .

[25]  Stephen J. Wright,et al.  Efficient implementation of model predictive control for sheet and film forming processes , 1997, Proceedings of the 1997 American Control Conference (Cat. No.97CH36041).

[26]  M. Sheikhzadeh,et al.  Real-time optimal control of an anti-solvent isothermal semi-batch crystallization process , 2008 .

[27]  N. Kockmann,et al.  Enabling continuous-flow chemistry in microstructured devices for pharmaceutical and fine-chemical production. , 2008, Chemistry.

[28]  J. L. Duda,et al.  Modeling of multilayer drying of polymer films , 1999 .

[29]  Dimitrios I. Gerogiorgis,et al.  Economic Analysis of Integrated Continuous and Batch Pharmaceutical Manufacturing: A Case Study , 2011 .

[30]  Zoltan K. Nagy,et al.  Nonlinear Model-Based Control of a Semi-Industrial Batch Crystallizer Using a Population Balance Modeling Framework , 2012, IEEE Transactions on Control Systems Technology.

[31]  James B. Rawlings,et al.  Gage control of film and sheet-forming processes , 1996 .

[32]  Luis G. Bergh,et al.  Spatial control of sheet and film forming processes , 1987 .

[33]  Babu Joseph,et al.  Techniques of Model-Based Control , 2002 .

[34]  San Kiang,et al.  Can pharmaceutical process development become high tech , 2006 .

[35]  Zoltan K. Nagy,et al.  Model based control of a liquid swelling constrained batch reactor subject to recipe uncertainties , 2009 .

[36]  Bruce R. Kowalski,et al.  Polymer Film Thickness Determination with a High-Precision Scanning Reflectometer , 1996 .

[37]  Helene Panagopoulos,et al.  PID Controller Design , 1998 .

[38]  J. L. Duda,et al.  DRYING OF SOLVENT COATED POLYMER FILMS , 1998 .

[39]  Frank Allgöwer,et al.  Nonlinear model predictive control : towards new challenging applications , 2009 .

[40]  Andreas Bück,et al.  Two state estimators for the barium sulfate precipitation in a semi-batch reactor , 2009 .

[41]  Richard D. Braatz,et al.  Nonlinear model predictive control for the polymorphic transformation of L‐glutamic acid crystals , 2009 .

[42]  Pascal Dufour,et al.  Control Engineering in Drying Technology: Review and Trends , 2006 .

[43]  C. Lindeborg.  A Simulation Study of the Moisture Cross-direction Control Problem , 1987 .

[44]  M. Heaven,et al.  New trends in CD weight control for multi-ply applications , 1999 .

[45]  Richard D. Braatz,et al.  Fast model predictive control of sheet and film processes , 2000, IEEE Trans. Control. Syst. Technol..

[46]  J. Rawlings,et al.  Feedback control of chemical processes using on-line optimization techniques , 1990 .

[47]  Lorenz T. Biegler,et al.  Efficient Solution of Dynamic Optimization and NMPC Problems , 2000 .

[48]  Richard D. Braatz,et al.  Identification and cross‐directional control of coating processes , 1992 .

[49]  Rudolph van der Merwe,et al.  The square-root unscented Kalman filter for state and parameter-estimation , 2001, 2001 IEEE International Conference on Acoustics, Speech, and Signal Processing. Proceedings (Cat. No.01CH37221).

[50]  Tor Steinar Schei,et al.  ON-LINE ESTIMATION FOR PROCESS CONTROL AND OPTIMIZATION APPLICATIONS , 2008 .

[51]  James B. Rawlings,et al.  Predictive control of sheet and film‐forming processes , 1998 .

[52]  Wolfgang Dahmen,et al.  Introduction to Model Based Optimization of Chemical Processes on Moving Horizons , 2001 .

[53]  Richard A. Cairncross,et al.  Optimization of single‐zone drying of polymer solution coatings using mathematical modeling , 2000 .

[54]  Peter E. Price,et al.  Extracting effective diffusion parameters from drying experiments , 1997 .

[55]  William P. Heath,et al.  On-line sensing of paper machine wet-end properties: dry-line detector , 1997, IEEE Trans. Control. Syst. Technol..

[56]  H Leuenberger,et al.  New trends in the production of pharmaceutical granules: batch versus continuous processing. , 2001, European journal of pharmaceutics and biopharmaceutics : official journal of Arbeitsgemeinschaft fur Pharmazeutische Verfahrenstechnik e.V.

[57]  Kamla Pathak,et al.  Fast Dissolving Oral Films: An Innovative Drug Delivery System and Dosage Form , 2003 .

[58]  M. Morari,et al.  Internal model control: PID controller design , 1986 .

[59]  Paul M.J. Van den Hof,et al.  A comparison of nonlinear observers for output feedback model-based control of seeded batch crystallization processes , 2011 .

[60]  Franz Durst,et al.  Dynamic optimization of multiple-zone air impingement drying processes , 2006, Comput. Chem. Eng..

[61]  Jeffrey K. Uhlmann,et al.  New extension of the Kalman filter to nonlinear systems , 1997, Defense, Security, and Sensing.

[62]  S. Joe Qin,et al.  An Overview of Nonlinear Model Predictive Control Applications , 2000 .

[63]  Shivangi Kunte,et al.  Fast dissolving strips: A novel approach for the delivery of verapamil , 2010, Journal of pharmacy & bioallied sciences.

[64]  K. Plumb,et al.  Continuous Processing in the Pharmaceutical Industry: Changing the Mind Set , 2005 .

[65]  Babu Joseph,et al.  Shrinking horizon model predictive control applied to autoclave curing of composite laminate materials , 1994, Proceedings of 1994 American Control Conference - ACC '94.