Toward simultaneous compatibilization and nucleation of fully biodegradabe nanocomposites: Effect of nanorod-assisted interfacial stereocomplex crystals in immiscible polymer blends

[1]  Xiao-dong Qi,et al.  Synchronously enhanced thermal conductivity and heat resistance in poly(l-lactide)/graphene nanoplatelets composites via constructing stereocomplex crystallites at interface , 2021 .

[2]  XiaoBai Li,et al.  Constructing Silk Fibroin-Based Three-Dimensional Microfluidic Devices via a Tape Mask-Assisted Multiple-Step Etching Technique. , 2021, ACS applied bio materials.

[3]  Donraporn Daranarong,et al.  Development of an Antimicrobial-Coated Absorbable Monofilament Suture from a Medical-Grade Poly(l-lactide-co-ε-caprolactone) Copolymer , 2021, ACS omega.

[4]  M. Jikei,et al.  Synthesis and Antiplatelet Adhesion Behavior of a Poly(L-lactide-co-glycolide)–Poly(1,5-dioxepan-2-one) Multiblock Copolymer , 2021, ACS omega.

[5]  Yongjin Li,et al.  Strengthened interface as flame retarding belt: Compatibilized PLLA/PP blends by reactive boehmite nanorods , 2021, Polymer.

[6]  Yaqi Wang,et al.  Preparation of different morphologies cellulose nanocrystals from waste cotton fibers and its effect on PLLA/PDLA composites films , 2021, Composites Part B: Engineering.

[7]  Junhua Kong,et al.  Entropy-Driven Ultratough Blends from Brittle Polymers. , 2021, ACS macro letters.

[8]  Yongjin Li,et al.  Stable Co-Continuous PLA/PBAT Blends Compatibilized by Interfacial Stereocomplex Crystallites: Toward Full Biodegradable Polymer Blends with Simultaneously Enhanced Mechanical Properties and Crystallization Rates , 2021, Macromolecules.

[9]  Hasti Bizhani,et al.  Toward morphology development and impact strength of Co-continuous supertough dynamically vulcanized rubber toughened PLA blends: Effect of sulfur content , 2021 .

[10]  Yongjin Li,et al.  Arrested Elongated Interface with Small Curvature by the Simultaneous Reactive Compatibilization and Stereocomplexation , 2020 .

[11]  A. Müller,et al.  Origin of Transcrystallinity and Nucleation Kinetics in Polybutene-1/Fiber Composites , 2020 .

[12]  Yongjin Li,et al.  Interfacially located nanoparticles: Barren nanorods versus polymer grafted nanorods , 2020 .

[13]  B. Garnaik,et al.  Ofloxacin-Loaded PLLA Nanofibrous Mats for Wound Dressing Applications. , 2020, ACS applied bio materials.

[14]  Binghong Luo,et al.  The design, fabrication and evaluation of 3D printed gHNTs/gMgO whiskers/PLLA composite scaffold with honeycomb microstructure for bone tissue engineering , 2020, Composites Part B: Engineering.

[15]  M. Rezaei,et al.  Preparation of electroactive shape memory polyurethane/graphene nanocomposites and investigation of relationship between rheology, morphology and electrical properties , 2019, Composites Part B: Engineering.

[16]  Yongjin Li,et al.  Increased gt Conformer Contents of PLLA Molecular Chains Induced by Li-TFSI in Melt: Another Route to Promote PLLA Crystallization , 2019, Macromolecules.

[17]  M. Mahmoodi,et al.  CNT-volume-fraction-dependent aggregation and waviness considerations in viscoelasticity-induced damping characterization of percolated-CNT reinforced nanocomposites , 2019, Composites Part B: Engineering.

[18]  L. Gu,et al.  Micromechanical analysis of bioresorbable PLLA/Mg composites coated with MgO: Effects of particle weight fraction, particle/matrix interface bonding strength and interphase , 2019, Composites Part B: Engineering.

[19]  Yongjin Li,et al.  Flame-retarding nanoparticles as the compatibilizers for immiscible polymer blends: simultaneously enhanced mechanical performance and flame retardancy , 2019, Journal of Materials Chemistry A.

[20]  Q. Fu,et al.  Toward Supertough and Heat-Resistant Stereocomplex-Type Polylactide/Elastomer Blends with Impressive Melt Stability via in Situ Formation of Graft Copolymer during One-Pot Reactive Melt Blending , 2019, Macromolecules.

[21]  Yongjin Li,et al.  Phenomenon of LCST-type phase behavior in SAN/PMMA systems and its effect on the PLLA/ABS blend compatibilized by PMMA-type polymers: Interface stabilization or micelle formation , 2019, Polymer.

[22]  Fajun Zhang,et al.  Interplay between Stereocomplexation and Microphase Separation in PS-b-PLLA-b-PDLA Triblock Copolymers , 2019, Macromolecules.

[23]  Junhua Kong,et al.  Biodegradable PHB-Rubber Copolymer Toughened PLA Green Composites with Ultrahigh Extensibility , 2018, ACS Sustainable Chemistry & Engineering.

[24]  Mingliang Du,et al.  Smart Design of Rapid Crystallizing and Nonleaching Antibacterial Poly(lactide) Nanocomposites by Sustainable Aminolysis Grafting and in Situ Interfacial Stereocomplexation , 2018, ACS Sustainable Chemistry & Engineering.

[25]  S. Satija,et al.  Enhancing Impact Resistance of Polymer Blends via Self-Assembled Nanoscale Interfacial Structures , 2018 .

[26]  L. Yongjin,et al.  Formation of co‐continuous PLLA/PC blends with significantly improved physical properties by reactive comb polymers , 2018 .

[27]  Yongjin Li,et al.  Rheology of Nanosilica-Compatibilized Immiscible Polymer Blends: Formation of a ``Heterogeneous Network'' Facilitated by Interfacially Anchored Hybrid Nanosilica , 2017 .

[28]  Yongjin Li,et al.  Reactive Compatibilization: Formation of Double-Grafted Copolymers by In Situ Binary Grafting and Their Compatibilization Effect. , 2017, ACS applied materials & interfaces.

[29]  G. Zhong,et al.  Promoting Interfacial Transcrystallization in Polylactide/Ramie Fiber Composites by Utilizing Stereocomplex Crystals , 2017 .

[30]  Qing Xie,et al.  Competing Stereocomplexation and Homocrystallization of Poly(l-lactic acid)/Poly(d-lactic acid) Racemic Mixture: Effects of Miscible Blending with Other Polymers. , 2017, The journal of physical chemistry. B.

[31]  M. Karrabi,et al.  Correlation between viscoelastic behavior and morphology of nanocomposites based on SR/EPDM blends compatibilized by maleic anhydride , 2017 .

[32]  J. Lopez‐Cuesta,et al.  Viscoelastic properties of polystyrene/polyamide-6 blend compatibilized with silica/polystyrene Janus hybrid nanoparticles , 2017 .

[33]  Yongjin Li,et al.  Formation of Interfacial Janus Nanomicelles by Reactive Blending and Their Compatibilization Effects on Immiscible Polymer Blends. , 2016, The journal of physical chemistry. B.

[34]  Pengju Pan,et al.  Polymorphic Crystallization and Crystalline Reorganization of Poly(l-lactic acid)/Poly(d-lactic acid) Racemic Mixture Influenced by Blending with Poly(vinylidene fluoride). , 2016, The journal of physical chemistry. B.

[35]  Yongjin Li,et al.  Dramatic Improvement in Toughness of PLLA/PVDF Blends: the Effect of Compatibilizer Architectures , 2016 .

[36]  Yongjin Li,et al.  Compatibilization of Immiscible Polymer Blends Using in Situ Formed Janus Nanomicelles by Reactive Blending. , 2015, ACS macro letters.

[37]  P. J. Lemstra,et al.  Rapid Stereocomplexation between Enantiomeric Comb-Shaped Cellulose-g-poly(L-lactide) Nanohybrids and Poly(D-lactide) from the Melt. , 2015, Biomacromolecules.

[38]  Yongjin Li,et al.  PLLA/ABS Blends Compatibilized by Reactive Comb Polymers: Double Tg Depression and Significantly Improved Toughness , 2015 .

[39]  K. Waters,et al.  Investigation of advanced mica powder nanocomposite filler materials: Surface energy analysis, powder rheology and sound absorption performance , 2015 .

[40]  C. Macosko,et al.  Reactive Compatibilization of Polylactide/Polypropylene Blends , 2015 .

[41]  Yongjin Li,et al.  Synthesis of Reactive Comb Polymers and Their Applications as a Highly Efficient Compatibilizer in Immiscible Polymer Blends , 2015 .

[42]  C. Macosko,et al.  Accelerating Reactive Compatibilization of PE/PLA Blends by an Interfacially Localized Catalyst. , 2015, ACS macro letters.

[43]  Yihu Song,et al.  Linear rheology of nanofilled polymers , 2015 .

[44]  Wei Yang,et al.  Stereocomplex Crystallite Network in Asymmetric PLLA/PDLA Blends: Formation, Structure, and Confining Effect on the Crystallization Rate of Homocrystallites , 2014 .

[45]  Pengju Pan,et al.  Enhanced Nucleation and Crystallization of Poly(l-lactic acid) by Immiscible Blending with Poly(vinylidene fluoride) , 2014 .

[46]  Jie Song,et al.  Flow Accelerates Interfacial Coupling Reactions , 2010 .

[47]  Sabu Thomas,et al.  Morphology, Dynamic Mechanical, Thermal, and Crystallization Behaviors of Poly(trimethylene terephthalate)/Polycarbonate Blends , 2010 .

[48]  L. Lim,et al.  Processing technologies for poly(lactic acid) , 2008 .

[49]  Y. Ozaki,et al.  Crystallization behaviors of poly(3-hydroxybutyrate) and poly(l-lactic acid) in their immiscible and miscible blends. , 2006, The journal of physical chemistry. B.

[50]  Kazuki Fukushima,et al.  Controlled crystal nucleation in the melt-crystallization of poly(l-lactide) and poly(l-lactide)/poly(d-lactide) stereocomplex , 2003 .

[51]  C. Macosko,et al.  Block copolymers in homopolymer blends: Interface vs micelles , 2001 .

[52]  Takashi Inoue,et al.  Reactive blending of polyamide with polyethylene: pull-out of in situ-formed graft copolymer , 2001 .

[53]  Takashi Inoue,et al.  Pull-out of copolymer in situ-formed during reactive blending: effect of the copolymer architecture , 2000 .

[54]  P. Gennes.  Polymers at an interface. 2. Interaction between two plates carrying adsorbed polymer layers , 1982 .