A review of impact damage detection in structures using strain data

This paper aims to provide a state-of-the-art review on impact damage detection techniques in structures using strain data. An overview of impact detection systems is provided. These include sensors, specimens, and impact sources used for developing and testing strategies. The review is focused on approaches that use impact strain data (passive approach) to determine simultaneously the location and/or energy of an impact at the time it occurs. These approaches can be classed into two main groups, one based on analytical models and the other based on data-driven models. The former uses a first-principle model obtained from physical laws, whereas the latter describes complex relationships between input and output data obtained by experiments or simulations. Although some weaknesses and strengths are cited, we did not attempt to compare these approaches, and we do not comment the quantitative results.

[1]  Fu-Kuo Chang,et al.  Impact identification of stiffened composite panels: I. System development , 2001 .

[2]  Enboa Wu,et al.  Identification of impact forces at multiple locations on laminated plates , 1994 .

[3]  L. H. Pearson,et al.  Acoustic-Emission Monitoring of Composite Damage Occurring Under Static and Impact Loading , 1985 .

[4]  Stefan Hurlebaus,et al.  IDENTIFICATION OF THE IMPACT LOCATION ON A PLATE USING WAVELETS , 1998 .

[5]  H Prosser William,et al.  Acoustic Emission Signals in Thin Plates Produced by Impact Damage , 1999 .

[6]  K.D. Champaigne,et al.  Wireless Impact and Leak Detection and Location Systems for the ISS and Shuttle Wing Leading Edge , 2005, 2005 IEEE Aerospace Conference.

[7]  In-Gul Kim,et al.  Prediction of Impact Forces on an Aircraft Composite Wing , 2008 .

[8]  F. Chang,et al.  Identifying Impacts in Composite Plates with Piezoelectric Strain Sensors, Part I: Theory , 1998 .

[9]  Chun-Gon Kim,et al.  Strain Monitoring and Damage Detection of a Filament Wound Composite Pressure Tank Using Embedded Fiber Bragg Grating Sensors , 2005 .

[10]  F. Chang,et al.  Impact identification of stiffened composite panels: II. Implementation studies , 2001 .

[11]  Abdallah A. Elsharkawy,et al.  An inverse solution for low-velocity impact in composite plates , 2001 .

[12]  Agnar Aamodt,et al.  Case-Based Reasoning: Foundational Issues, Methodological Variations, and System Approaches , 1994, AI Commun..

[13]  Richard W. Ross,et al.  Structural Health Monitoring and Impact Detection Using Neural Networks for Damage Characterization , 2006 .

[14]  Keith Worden,et al.  Impact Location and Quantification on a Composite Panel using Neural Networks and a Genetic Algorithm , 2000 .

[15]  K. Chandrashekhara,et al.  Prediction of Impact Contact Forces of Composite Plates Using Fiber Optic Sensors and Neural Networks , 2000 .

[16]  Michel Verleysen,et al.  Multivariate statistics process control for dimensionality reduction in structural assessment , 2008 .

[17]  H. T. Hahn,et al.  An Artificial Neural Network for Low-Energy Impact Monitoring , 1994 .

[18]  P L Fuhr.  Single-fiber simultaneous vibration sensing and impact detection for large space structures , 1994 .

[19]  Anindya Ghoshal,et al.  Recent advances in an artificial neural system for structural health monitoring , 2003, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[20]  Chang Zhang,et al.  Practical issues in real-world implementation of structural health monitoring systems , 2005, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[21]  Kent A. Murphy,et al.  Optical fiber sensing technique for impact detection and location in composites and metal specimens , 1995 .

[22]  Nobuo Takeda,et al.  Wave Propagation Experiments On Ballistically Impacted Composite Laminates , 1981 .

[23]  Christian Boller,et al.  Identification of Life Cycle Cost Reductions in Structures With Self-Diagnostic Devices , 2000 .

[24]  Dae-Un Sung,et al.  Impact Monitoring of Smart Composite Laminates Using Neural Network and Wavelet Analysis , 2000 .

[25]  S. Egusa,et al.  Poling characteristics of PZT/epoxy piezoelectric paints , 1993 .

[26]  Chia-Chen Chang,et al.  Optical fiber sensors embedded in composite panels for impact detection , 1995, Smart Structures.

[27]  Satoshi Matsumoto,et al.  Impact Force Identification of Aluminum Plates Using Strain Sensors , 2003 .

[28]  Anindya Ghoshal,et al.  An Artificial Neural Receptor System for Structural Health Monitoring , 2005 .

[29]  Keeyoung Choi,et al.  Identification of Impact Force and Location Using Distributed Sensors , 1996 .

[30]  Alan D. Kersey,et al.  Multiplexed Bragg grating fibre-laser strain sensor system with mode-locked interrogation , 1993 .

[31]  J.E.T. Penny,et al.  Impact Location on Stiffened Composite Structures Using Neural Networks , 2001 .

[32]  Boeing Helicopters,et al.  Impact Detection in Composite Skin Panels Using Piezoelectric Sensors , 1991 .

[33]  S. Beard,et al.  Active Damage Detection in Filament Wound Composite Tubes Using Built-In Sensors and Actuators , 1997 .

[34]  T. Kundu,et al.  Point of impact prediction in isotropic and anisotropic plates from the acoustic emission data. , 2007, The Journal of the Acoustical Society of America.

[35]  Enboa Wu,et al.  Two methods for determining impact-force history on elastic plates , 1995 .

[36]  E. Shin.  Real-time recovery of impact force based on finite element analysis , 2000 .

[37]  Wieslaw J. Staszewski,et al.  Monitoring on-line integrated technologies for operational reliability — monitor , 2000 .

[38]  Padraig Cunningham.  CBR: Strengths and Weaknesses , 1998, IEA/AIE.

[39]  Q. Shan,et al.  Fuzzy techniques for impact locating and magnitude estimating , 2003 .

[40]  Chang-Sun Hong,et al.  MULTIPLEXED STRAIN MONITORING OF COMPOSITE STRUCTURES USING FIBER BRAGG GRATING SENSORS , 2007 .

[41]  Jamshid Mohammadi.  NDT Methods Applied to Fatigue Reliability Assessment of Structures , 2004 .

[42]  James F. Doyle.  Experimentally determining the contact force during the transverse impact of an orthotropic plate , 1987 .

[43]  Kent A. Murphy,et al.  Fiber optic impact detection and location system embedded in a composite material , 1993, Other Conferences.

[44]  Nestore Galati,et al.  A low-cost wireless system for real-time structural health monitoring , 2007 .

[45]  Anindya Ghoshal,et al.  Damage localisation in composite and metallic structures using a structural neural system and simulated acoustic emissions , 2007 .

[46]  T. Kundu,et al.  Locating point of impact in anisotropic fiber reinforced composite plates. , 2008, Ultrasonics.

[47]  James S. Sirkis,et al.  Development of an impact detection technique using optical fiber sensors and neural networks , 1994, Smart Structures.

[48]  Keith Worden,et al.  Fail-safe sensor distributions for impact detection in composite materials , 2000 .

[49]  Hisao Fukunaga,et al.  An efficient approach for identifying impact force using embedded piezoelectric sensors , 2007 .

[50]  Eric Udd,et al.  An overview of fiber‐optic sensors , 1995 .

[51]  Toshimichi Ogisu,et al.  Impact monitoring of the aircraft composite structure using FBG sensor/PZT actuator hybrid sensor system , 2007, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[52]  Keith Worden,et al.  Impact Damage Detection in Aircraft Composites Using Knowledge-based Reasoning , 2008 .

[53]  C.R.L. Murthy,et al.  Parametric Analysis of Acoustic Emission Signals for Evaluating Damage in Composites Using a PVDF Film Sensor , 2005 .

[54]  Huiming Ning,et al.  1007 Structural Health Monitoring of Composite Structures Based on Impact Force Identification , 2006 .

[55]  H. Inoue,et al.  Review of inverse analysis for indirect measurement of impact force , 2001 .

[56]  Michele Meo,et al.  Impact identification on a sandwich plate from wave propagation responses , 2005 .

[57]  Keith Worden,et al.  An automatic impact monitor for a composite panel employing smart sensor technology , 2005 .

[58]  Keith Worden,et al.  Optimal sensor placement for fault detection , 2001 .

[59]  James F. Doyle,et al.  A genetic algorithm for determining the location of structural impacts , 1994 .

[60]  Keith Worden,et al.  Impact detection in an aircraft composite panel—A neural-network approach , 2007 .

[61]  David A. Hutchins,et al.  Micromachined ultrasonic transducers for damage detection in CFRP composites , 1999, Smart Structures.

[62]  W. Staszewski,et al.  Impact damage location in composite structures using optimized sensor triangulation procedure , 2003 .

[63]  Fu-Kuo Chang,et al.  Identifying Impacts in Composite Plates with Piezoelectric Strain Sensors, Part II: Experiment , 1998 .

[64]  G. R. Tomlinson,et al.  A Combined Neural and Genetic Approach to Sensor Placement , 1995 .

[65]  N. Djilali,et al.  In-fibre Bragg grating sensors for distributed temperature measurement in a polymer electrolyte membrane fuel cell , 2009 .

[66]  Yunfeng Zhang.  Piezoelectric paint sensor for real-time structural health monitoring , 2005, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[67]  James S. Sirkis,et al.  Detection of Impact Location and Magnitude for Isotropic Plates Using Neural Networks , 1997 .

[68]  H. Jeong,et al.  Wavelet analysis of plate wave propagation in composite laminates , 2000 .

[69]  Armaghan Salehian,et al.  Identifying the Location of a Sudden Damage in Composite Laminates Using Wavelet Approach , 2003 .

[70]  In-Gul Kim,et al.  Impact Damage Detection in Composite Laminates Using PVDF and PZT Sensor Signals , 2005 .

[71]  Richard O. Claus,et al.  Location of impacts on composite panels by embedded fiber optic sensors and neural network processing , 1995, Smart Structures.

[72]  J. F. Doyle,et al.  Impact force identification from wave propagation responses , 1996 .

[73]  Jonghyun Park,et al.  System identification method for monitoring impact events , 2005, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.