Microstructure evolution during laser-aided direct metal deposition of alloy tool steel

Laser-aided direct metal deposition has been used to form an alloy tool steel coating. The microstructure of the deposited material was analyzed by means of scanning electron microscopy and transmission electron microscopy. The formation relationships among martensite, e-carbide, cementite and austenite in the coating are discussed. The effect of rapid solidification associated with direct metal deposition on lattice parameters is also reported.

[1]  K. Andrews.  The structure of cementite and its relation to ferrite and epsilon carbide—II , 1964 .

[2]  K. Andrews.  The structure of cementite and its relation to ferrite , 1963 .

[3]  W. Wood.  Effect of heat treatment on the fracture toughness of low alloy steels , 1975 .

[4]  J. Mazumder,et al.  Direct materials deposition: designed macro and microstructure , 1998 .

[5]  Steven J. Skerlos,et al.  Environmental aspects of laser-based and conventional tool and die manufacturing , 2007 .

[6]  R. Padmanabhan,et al.  Precipitation of ϵ carbide in martensite , 1984 .

[7]  J. Mazumder,et al.  The direct metal deposition of H13 tool steel for 3-D components , 1997 .

[8]  Gerard Mourou,et al.  Femtosecond laser micromachining of a single-crystal superalloy , 2005 .

[9]  G. Thomas.  Retained austenite and tempered martensite embrittlement , 1978 .

[10]  R. Ritchie,et al.  Mechanisms of tempered martensite embrittlement in low alloy steels , 1978 .

[11]  C. Fan,et al.  Stability and work hardening of an Fe-12Cr-23Mn austenitic steel , 1985 .

[12]  Peter K. Liaw,et al.  Effects of a laser surface processing induced heat-affected zone on the fatigue behavior of AISI 4340 steel , 2008 .

[13]  R. Padmanabhan,et al.  On the occurrence of blocky martensite in 300M steel , 1984 .

[14]  H. Bhadeshia,et al.  ε-Carbide in alloy steels: First-principles assessment , 2010 .

[15]  J. Choi,et al.  Characteristics of laser aided direct metal/material deposition process for tool steel , 2005 .

[16]  R. A. Clark,et al.  The effect of austenitizing temperature on the microstructure and mechanical properties of as-quenched 4340 steel , 1974, Metallurgical and Materials Transactions B.

[17]  P. Molian.  Laser surface heat treatment of AISI 4340 steel: A microstructural study , 1981 .

[18]  A. M. Deus,et al.  Rapid tooling by laser powder deposition : Process simulation using finite element analysis , 2005 .

[19]  S. K. Maiti,et al.  Bilinear CTOD/CTOA scheme for characterisation of large range mode I and mixed mode stable crack growth through AISI 4340 steel , 2008 .

[20]  W. Wood,et al.  On the presence of retained austenite at the prior austenite grain boundaries of AISI 4340 steel , 1980 .

[21]  Herman Jacobus Cornelis Voorwald,et al.  Effects of surface treatments on the fatigue strength of AISI 4340 aeronautical steel , 2001 .