Adapted magnetic wheel unit for compact robots inspecting complex shaped pipe structures

This paper describes a novel magnetic wheel unit integrating a mechanism that can be used for lifting and stabilizing the unit. The mechanism consists of 2 active lever arms mounted on each side of the wheel and rotating coaxially with the wheel. This mechanism allows slightly lifting the magnetic wheel at any desired position on the wheel circumference and consequently decreasing the magnetic force at this specific location. The same mechanism can also be used to stabilize the wheel, when external forces are unfavorable. This paper also describes the potential of this concept for in-pipe inspection technologies. Indeed it can be used to increase the mobility of magnetic wheels robots which are currently not able to negotiate complex obstacles. At the same time, it allows building smaller robots, since the self stabilizer system allows reducing the amount of required magnetic wheels to only two units.

[1]  Yasuo Suga,et al.  Autonomous mobile robot in pipe for piping operations , 2000, Proceedings. 2000 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2000) (Cat. No.00CH37113).

[2]  Y. Kawaguchi,et al.  Internal pipe inspection robot , 1995, Proceedings of 1995 IEEE International Conference on Robotics and Automation.

[3]  R. Siegwart,et al.  An Innovative Space Rover with Extended Climbing Abilities , 2000 .

[4]  Shigeo Hirose,et al.  Design of In-Pipe Inspection Vehicles for ø25, ø50, ø150 Pi , 1999, ICRA.

[5]  Roland Siegwart,et al.  Magnetic Wall Climbing Robot for Thin Surfaces with Specific Obstacles , 2007, FSR.

[6]  Yoshifumi Kawaguchi,et al.  Inspection robot for spherical storage tanks , 2000, 2000 26th Annual Conference of the IEEE Industrial Electronics Society. IECON 2000. 2000 IEEE International Conference on Industrial Electronics, Control and Instrumentation. 21st Century Technologies.

[7]  Friedrich Pfeiffer,et al.  "MORITZ" a pipe crawler for tube junctions , 2003, 2003 IEEE International Conference on Robotics and Automation (Cat. No.03CH37422).

[8]  Hyoukryeol Choi,et al.  Differential-drive in-pipe robot for moving inside urban gas pipelines , 2005, IEEE Transactions on Robotics.

[9]  Hagen Schempf,et al.  Explorer: Untethered Real-Time Gas Main Assessment Robot System , 2003 .

[10]  S. Hirose,et al.  Design of in-pipe inspection vehicles for /spl phi/25, /spl phi/50, /spl phi/150 pipes , 1999, Proceedings 1999 IEEE International Conference on Robotics and Automation (Cat. No.99CH36288C).

[11]  Koichi Suzumori,et al.  Micro inspection robot for 1-in pipes , 1999 .

[12]  M. Horodinca,et al.  1 A SIMPLE ARCHITECTURE FOR IN-PIPE INSPECTION ROBOTS , 2002 .

[13]  Alexander H. Slocum,et al.  MAGNEBOTS - A MAGNETIC WHEELS BASED OVERHEAD TRANSPORTATION CONCEPT , 2002 .

[14]  Roland Siegwart,et al.  Toward Micro Wall-Climbing Robots Using Biomimetic Fibrillar Adhesives , 2005, AMiRE.