Scalable Fabrication of Ni(Oh)2/Carbon/Polypropylene Separators for High-Performance Li-S Batteries

[1]  Ruiqiang Guo,et al.  The surface double-coupling on single-crystal LiNi0.8Co0.1Mn0.1O2 for inhibiting the formation of intragranular cracks and oxygen vacancies , 2022, Energy Storage Materials.

[2]  Y. Mai,et al.  Embedding amorphous SnS in electrospun porous carbon nanofibers for efficient potassium storage with ultralong cycle life , 2022, Composites Part B: Engineering.

[3]  Yu Bai,et al.  Enhancing Anchoring and Catalytic Conversion of Polysulfides by Nitrogen Deficient Cobalt Nitride for Advanced Lithium-Sulfur Batteries , 2022, Journal of Energy Chemistry.

[4]  Jinhyuk Lee,et al.  Research Progress in Lithium‐Excess Disordered Rock‐Salt Oxides Cathode , 2022, ENERGY & ENVIRONMENTAL MATERIALS.

[5]  Z. Fu,et al.  Sputtered MoN nanolayer as a multifunctional polysulfide catalyst for high-performance lithium–sulfur batteries , 2022, eScience.

[6]  Yuanhao Wang,et al.  Cobalt/three-dimensional carbon/reduced graphene oxide modified PP separator for Li-S batteries , 2022, Journal of Alloys and Compounds.

[7]  Yanglong Hou,et al.  MXenes: Synthesis strategies and lithium-sulfur battery applications , 2022, eScience.

[8]  X. Xia,et al.  Employing Ni-Embedded Porous Graphitic Carbon Fibers for High-Efficiency Lithium-Sulfur Batteries. , 2022, ACS applied materials & interfaces.

[9]  Sizhe Wang,et al.  Plasma and magnetron sputtering constructed dual-functional polysulfides barrier separator for high-performance lithium-sulfur batteries. , 2022, Journal of colloid and interface science.

[10]  Q. Li,et al.  Graphene nanoscroll based Janus bifunctional separators of suppressing lithium dendrites and polysulfides shuttling synchronously for high performance Lithium sulfur batteries , 2022, Journal of Materials Chemistry A.

[11]  Jianneng Liang,et al.  Efficient capture and conversion of polysulfides by zinc protoporphyrin framework-embedded triple-layer nanofiber separator for advanced Li-S batteries. , 2021, Journal of colloid and interface science.

[12]  J. Tu,et al.  Multifunctional Hyphae Carbon Powering Lithium–Sulfur Batteries , 2021, Advanced materials.

[13]  I. Mitrovic,et al.  A Ti3C2Tx MXene - carbon nanocage - sulfur cathode with high conductivity for improving the performance of Li-S batteries , 2021, Journal of Alloys and Compounds.

[14]  Shifeng Hou,et al.  Fe-doped Ni(OH)2 nanosheets grown on carbon fiber cloths as cathode interlayers for high-performance lithium-sulfur batteries , 2021 .

[15]  Nan Wang,et al.  Towards High Performance Li–S Batteries via Sulfonate‐Rich COF‐Modified Separator , 2021, Advanced materials.

[16]  R. Liu,et al.  Recent progress of separators in lithium-sulfur batteries , 2021 .

[17]  Guochun Li,et al.  Electrospun CoSe@NC nanofiber membrane as an effective polysulfides adsorption-catalysis interlayer for Li-S batteries , 2021, Chemical Engineering Journal.

[18]  Zhen-guo Wu,et al.  Novel functional separator with self-assembled MnO2 layer via a simple and fast method in lithium-sulfur battery. , 2021, Journal of colloid and interface science.

[19]  Y. Mai,et al.  Electrospinning Engineering Enables High-Performance Sodium-Ion Batteries , 2021, Advanced Fiber Materials.

[20]  Qingyun Dou,et al.  Layered Double Hydroxide Quantum Dots for Use in a Bifunctional Separator of Lithium-Sulfur Batteries. , 2021, ACS applied materials & interfaces.

[21]  Mao-wen Xu,et al.  Suppressed shuttling effect of polysulfides using three-dimensional nickel hydroxide polyhedrons for advanced lithium-sulfur batteries. , 2021, Journal of colloid and interface science.

[22]  Hong‐Jie Peng,et al.  A perspective on sustainable energy materials for lithium batteries , 2021, SusMat.

[23]  Weidong Zhou,et al.  Low‐Cost Regulating Lithium Deposition Behaviors by Transition Metal Oxide Coating on Separator , 2021, Advanced Functional Materials.

[24]  Mingfei Shao,et al.  Layered double hydroxides and their derivatives for lithium–sulfur batteries , 2020 .

[25]  Y. Mai,et al.  Electrospinning‐Based Strategies for Battery Materials , 2020, Advanced Energy Materials.

[26]  Yang Hou,et al.  Cerium oxide embedded bilayer separator enabling fast polysulfide conversion for high-performance lithium-sulfur batteries , 2020 .

[27]  Wei Liu,et al.  Stabilized lithium metal anode by an efficient coating for high-performance Li–S batteries , 2020 .

[28]  Zhenghao Sun,et al.  Boosting the electrochemical performance of lithium/sulfur batteries with the carbon nanotube/Fe3O4 coated by carbon modified separator , 2019, Electrochimica Acta.

[29]  Lianzhou Wang,et al.  Two-Dimensional Materials Functionalized Separators for High-Energy-Density Metal-Sulfur and Metal-based Batteries. , 2019, ChemSusChem.

[30]  Shenglin Xiong,et al.  P-doped BN nanosheets decorated graphene as the functional interlayer for Li–S batteries , 2019 .

[31]  Ke-ning Sun,et al.  MoN Supported on Graphene as a Bifunctional Interlayer for Advanced Li‐S Batteries , 2019, Advanced Energy Materials.

[32]  D. V. Kolosnitsyn,et al.  Mitigating strategy in lithium dendrite formation in a Li–S cell in accelerated cycling tests , 2019 .

[33]  Fei Pei,et al.  Ultrathin MOF nanosheet assembled highly oriented microporous membrane as an interlayer for lithium-sulfur batteries , 2019, Energy Storage Materials.

[34]  Shubin Yang,et al.  Synergistic electrocatalysis of polysulfides by a nanostructured VS4-carbon nanofiber functional separator for high-performance lithium–sulfur batteries , 2019, Journal of Materials Chemistry A.

[35]  C. Capiglia,et al.  A Comprehensive Understanding of Lithium–Sulfur Battery Technology , 2019, Advanced Functional Materials.

[36]  C. Kocabas,et al.  Ultra-lightweight Chemical Vapor Deposition grown multilayered graphene coatings on paper separator as interlayer in lithium-sulfur batteries , 2019, Journal of Alloys and Compounds.

[37]  Syed Ali Abbas,et al.  A lithium passivated MoO3 nanobelt decorated polypropylene separator for fast-charging long-life Li-S batteries. , 2019, Nanoscale.

[38]  Hyuck-Mo Lee,et al.  Tin sulfide modified separator as an efficient polysulfide trapper for stable cycling performance in Li-S batteries. , 2019, Nanoscale horizons.

[39]  J. Goodenough,et al.  Inhibiting Polysulfide Shuttling with a Graphene Composite Separator for Highly Robust Lithium-Sulfur Batteries , 2018, Joule.

[40]  A. Manthiram,et al.  Vertical Co9S8 hollow nanowall arrays grown on a Celgard separator as a multifunctional polysulfide barrier for high-performance Li–S batteries , 2018 .

[41]  Qiang Zhang,et al.  Enhanced Electrochemical Kinetics and Polysulfide Traps of Indium Nitride for Highly Stable Lithium-Sulfur Batteries. , 2018, ACS nano.

[42]  F. Ciucci,et al.  Novel 2D Sb2S3 Nanosheet/CNT Coupling Layer for Exceptional Polysulfide Recycling Performance , 2018, Advanced Energy Materials.

[43]  Jiaqi Huang,et al.  Dual‐Layered Film Protected Lithium Metal Anode to Enable Dendrite‐Free Lithium Deposition , 2018, Advanced materials.

[44]  Aravindaraj G. Kannan,et al.  Effective Trapping of Lithium Polysulfides Using a Functionalized Carbon Nanotube-Coated Separator for Lithium-Sulfur Cells with Enhanced Cycling Stability. , 2017, ACS applied materials & interfaces.

[45]  Xin-Bing Cheng,et al.  Nanodiamonds suppress the growth of lithium dendrites , 2017, Nature Communications.

[46]  Z. Tang,et al.  MoS2/Celgard Separator as Efficient Polysulfide Barrier for Long‐Life Lithium–Sulfur Batteries , 2017, Advanced materials.

[47]  Qiang Zhang,et al.  Nanostructured Metal Oxides and Sulfides for Lithium–Sulfur Batteries , 2017, Advanced materials.

[48]  Renjie Chen,et al.  Advanced Lithium–Sulfur Batteries Enabled by a Bio‐Inspired Polysulfide Adsorptive Brush , 2016 .

[49]  Lingzhi Zhang,et al.  Effect of Al substitution on the microstructure and lithium storage performance of nickel hydroxide , 2016 .

[50]  Xiaogang Han,et al.  Reactivation of dissolved polysulfides in Li–S batteries based on atomic layer deposition of Al2O3 in nanoporous carbon cloth , 2013 .

[51]  B. Stoeber,et al.  Substrate‐Free Fabrication of Self‐Supporting ZnO Nanowire Arrays , 2012, Advanced materials.

[52]  Lei Song,et al.  A flame retardant separator modified by MOFs-derived hybrid for safe and efficient Li-S batteries , 2022 .