Effects of Phase Shift Errors in Recurrence Plot for Rotating Machinery Fault Diagnosis

For fault diagnosis and predictive maintenance of rotating machinery, the phase errors generated by the integration processing of a vibration signal are an essential investigation subject. Phase errors affect the solution of mechanical systems with multiple vibration sources and also the information transmitted through the vibration that is used for fault diagnosis. This work proposes the use of phase plane, recurrence plot (RP), and cross recurrence plot (CRP) to evaluate phase shift error effects on the solution of multiple asynchronous and simple periodic functions, and on the smoothing of a Gaussian peak with white noise. Noisy peaks were smoothed twice with the triangular method and with a different number of points. The analysis of the asynchronous periodic functions and the smoothing indicated that a small phase shift changes the phase plane and the RP pattern. These changes can affect not only the accuracy of machinery fault diagnosis but also prediction for the application of timely maintenance actions.

[1]  Norbert Marwan,et al.  Recurrence plots 25 years later —Gaining confidence in dynamical transitions , 2013, 1306.0688.

[2]  Robert X. Gao,et al.  Recurrence plot entropy for machine defect severity assessment , 2013 .

[3]  Jaime Tupiassú Pinho de Castro,et al.  Parameter adjustments for optimizing signal integration using the FFT-DDI method , 2020 .

[4]  Long Wang,et al.  A novel noise reduction technique for underwater acoustic signals based on complete ensemble empirical mode decomposition with adaptive noise, minimum mean square variance criterion and least mean square adaptive filter , 2020 .

[5]  Tuan D. Pham,et al.  Fuzzy recurrence plots , 2016, Fuzzy Recurrence Plots and Networks with Applications in Biomedicine.

[6]  Jürgen Kurths,et al.  Recurrence plots for the analysis of complex systems , 2009 .

[7]  Chao Pan,et al.  Baseline correction of vibration acceleration signals with inconsistent initial velocity and displacement , 2016 .

[8]  Rodrigo Capobianco Guido,et al.  A note on a practical relationship between filter coefficients and scaling and wavelet functions of Discrete Wavelet Transforms , 2011, Appl. Math. Lett..

[9]  Yuan Yan Tang,et al.  A Framework of Adaptive Multiscale Wavelet Decomposition for Signals on Undirected Graphs , 2019, IEEE Transactions on Signal Processing.

[10]  Sangbo Han,et al.  Measuring displacement signal with an accelerometer , 2010 .

[11]  Wooram Kim,et al.  An improved explicit time integration method for linear and nonlinear structural dynamics , 2018, Computers & Structures.

[12]  Ruqiang Yan,et al.  Bearing Degradation Evaluation Using Recurrence Quantification Analysis and Kalman Filter , 2014, IEEE Transactions on Instrumentation and Measurement.

[13]  Qiao Li,et al.  Nonlinear and Non-Stationary Detection for Measured Dynamic Signal from Bridge Structure Based on Adaptive Decomposition and Multiscale Recurrence Analysis , 2019, Applied Sciences.

[14]  Wenhao Zheng,et al.  Real-time dynamic displacement monitoring with double integration of acceleration based on recursive least squares method , 2019, Measurement.

[15]  Emanuel Guariglia,et al.  Primality, Fractality, and Image Analysis , 2019, Entropy.

[16]  Kishore Kulat,et al.  A Review on Hybrid Empirical Mode Decomposition Models for Wind Speed and Wind Power Prediction , 2019, Energies.

[17]  Sina Mehdizadeh,et al.  Order error in the calculation of continuous relative phase. , 2018, Journal of biomechanics.

[18]  Shuting Wan,et al.  Compound fault diagnosis of bearings using improved fast spectral kurtosis with VMD , 2018, Journal of Mechanical Science and Technology.

[19]  J. Jáuregui-Correa,et al.  Analysis of the effect of different friction models on the dynamic response of a rotor rubbing the housing , 2019, Advances in Mechanism and Machine Science.

[20]  J. Jáuregui-Correa.  Identification of Nonlinearities in Mechanical Systems Using Recurrence Plots , 2019, Nonlinear Structural Dynamics and Damping.

[21]  Hao Zhu,et al.  Displacement reconstruction from measured accelerations and accuracy control of integration based on a low-frequency attenuation algorithm , 2020 .

[22]  Claudia C. Marin-Artieda,et al.  Least-Square-Support-Vector-Machine-based approach to obtain displacement from measured acceleration , 2018, Adv. Eng. Softw..

[23]  Xu Xiaohong,et al.  A new recursive Simpson integral algorithm in vibration testing , 2019 .

[24]  Zhipeng Feng,et al.  Induction motor stator current analysis for planetary gearbox fault diagnosis under time-varying speed conditions , 2020 .

[25]  U. Rajendra Acharya,et al.  Application of nonlinear methods to discriminate fractionated electrograms in paroxysmal versus persistent atrial fibrillation , 2019, Comput. Methods Programs Biomed..

[26]  Yanli Yang,et al.  Integration on acceleration signals by adjusting with envelopes , 2016 .

[27]  Ahmad Bagheri,et al.  New fault diagnosis approaches for detecting the bearing slight degradation , 2020 .

[28]  Emanuel Guariglia,et al.  Entropy and Fractal Antennas , 2016, Entropy.

[29]  Daniel Dotta,et al.  Identification of electromechanical oscillatory modes based on variational mode decomposition , 2019, Electric Power Systems Research.

[30]  D. Ruelle,et al.  Recurrence Plots of Dynamical Systems , 1987 .

[31]  G. Litak,et al.  Vibration Analysis in Cutting Materials , 2015 .