Surface characterization and corrosion behavior of a novel gold-imitation copper alloy with high tarnish resistance in salt spray environment

[1]  Song Hong,et al.  Investigation of the inhibition effect of trithiocyanuric acid on corrosion of copper in 3.0 wt.% NaCl , 2013 .

[2]  Song Hong,et al.  Inhibition effect of 4-amino-antipyrine on the corrosion of copper in 3 wt.% NaCl solution , 2012 .

[3]  Zhou Li,et al.  Corrosion behavior of novel imitation-gold copper alloy with rare earth in 3.5% NaCl solution , 2012 .

[4]  S. Shilstein,et al.  Making sense out of cents: compositional variations in European coins as a control model for archaeometallurgy , 2011 .

[5]  Юлия Алексеевна Щепочкина Copper-based alloy , 2011 .

[6]  S. Hong,et al.  Design and characterization of new Cu alloys to substitute Cu–25%Ni for coinage applications , 2011 .

[7]  K. F. Khaled,et al.  Copper corrosion inhibition in O2-saturated H2SO4 solutions , 2010 .

[8]  S. Ceré,et al.  Copper and brass aged at open circuit potential in slightly alkaline solutions , 2009 .

[9]  Y. Meas,et al.  Characterization of the corrosion products of electrodeposited Zn, Zn–Co and Zn–Mn alloys coatings , 2009 .

[10]  L. Campanella,et al.  The effect of tin on dezincification of archaeological copper alloys , 2009 .

[11]  M. Traisnel,et al.  Corrosion behaviour of galvanized steel and electroplating steel in aqueous solution: AC impedance study and XPS , 2008 .

[12]  S. Yuan,et al.  Surface characterization and corrosion behavior of 70/30 Cu-Ni alloy in pristine and sulfide-containing simulated seawater , 2007 .

[13]  N. Rajendran,et al.  Corrosion inhibition of brass by benzotriazole derivatives in NaCl solution , 2005 .

[14]  W. Badawy,et al.  Effect of Ni content on the corrosion behavior of Cu–Ni alloys in neutral chloride solutions , 2005 .

[15]  S. Pehkonen,et al.  Copper corrosion in mildly alkaline water with the disinfectant monochloramine , 2002 .

[16]  F. Walsh,et al.  Developments in Marine Corrosion , 1998 .

[17]  H. Strehblow,et al.  Surface analytical examination of passive layers on Cu-Ni alloys part II. Acidic solutions , 1996 .

[18]  S. Golledge,et al.  A surface analytical examination of passive layers on CuNi alloys: Part I. Alkaline solution , 1996 .

[19]  D. Mills,et al.  An introduction to electrochemical corrosion testing for practicing engineers and scientists: By W. Stephen Tait, published by PairODocs Publications, Racine, WI, USA , 1995 .

[20]  H. Exner,et al.  The corrosion of nickel-aluminium bronzes in seawater—I. Protective layer formation and the passivation mechanism , 1993 .

[21]  H. Exner,et al.  The corrosion of nickel-aluminium bronzes in seawater—II. The corrosion mechanism in the presence of sulphide pollution , 1993 .

[22]  W. Stickle,et al.  Handbook of X-Ray Photoelectron Spectroscopy , 1992 .

[23]  L. Berlouis,et al.  Difference reflectance spectroscopy of anodic films on copper and copper base alloys , 1991 .

[24]  H. Kaesche,et al.  A morphological study of dezincification of £brass , 1990 .

[25]  B. Boukamp A Nonlinear Least Squares Fit procedure for analysis of immittance data of electrochemical systems , 1986 .

[26]  L. E. Eiselstein,et al.  The accelerated corrosion of CuNi alloys in sulphide-polluted seawater: Mechanism no. 2 , 1983 .

[27]  V. Lucey The Mechanism of Dezincification and the Effect of Arsenic. I. , 1965 .