Sub-size specimen testing for near-threshold fatigue crack behaviour of Additively Manufactured Ti-6Al-4V

[1]  Jun Yu Li,et al.  Phase transformation mechanisms, microstructural characteristics and mechanical performances of an additively manufactured Ti-6Al-4V alloy under dual-stage heat treatment , 2022, Materials & Design.

[2]  T. Becker,et al.  Fatigue life estimation of additively manufactured Ti-6Al-4V: sensitivity, scatter and defect description in Damage-tolerant models , 2022, Acta Materialia.

[3]  M. Benedetti,et al.  Determination of fatigue crack growth in the near-threshold regime using small-scale specimens , 2021, Theoretical and Applied Fracture Mechanics.

[4]  U. Ramamurty,et al.  Fracture and fatigue in additively manufactured metals , 2021 .

[5]  E. Borisov,et al.  Effect of microstructure induced anisotropy on fatigue behaviour of functionally graded Inconel 718 fabricated by additive manufacturing , 2021 .

[6]  R. Hielscher,et al.  Parent grain reconstruction from partially or fully transformed microstructures in MTEX , 2021, Journal of applied crystallography.

[7]  K. Vanmeensel,et al.  Fatigue crack growth parameters of Laser Powder Bed Fusion produced Ti-6Al-4V , 2021 .

[8]  J. Buffière,et al.  Damage tolerant design of additively manufactured metallic components subjected to cyclic loading: State of the art and challenges. , 2021, Progress in materials science.

[9]  A.K. Vasudevan,et al.  Analyses of KOP relationship to threshold Kmax,th , 2021 .

[10]  S. M. Ahmadi,et al.  Continuous and pulsed selective laser melting of Ti6Al4V lattice structures: Effect of post-processing on microstructural anisotropy and fatigue behaviour , 2020 .

[11]  F. Berto,et al.  Effect of build thickness and geometry on quasi-static and fatigue behavior of Ti-6Al-4V produced by Electron Beam Melting , 2020 .

[12]  U. Ramamurty,et al.  High cycle fatigue in selective laser melted Ti-6Al-4V , 2020 .

[13]  Stewart W. Williams,et al.  A comparison framework to support the selection of the best additive manufacturing process for specific aerospace applications , 2020, International Journal of Rapid Manufacturing.

[14]  Yinghua Liu,et al.  New constraint parameters based on crack tip plastic zone: Theoretical derivations and effectiveness verification , 2020 .

[15]  A. Fatemi,et al.  Fatigue of additive manufactured Ti-6Al-4V, Part I: The effects of powder feedstock, manufacturing, and post-process conditions on the resulting microstructure and defects , 2020, International Journal of Fatigue.

[16]  P. Lopez‐Crespo,et al.  Influence of the constraint effect on the fatigue crack growth rate in S355 J2 steel using digital image correlation , 2020 .

[17]  Hongwei Liu,et al.  Effect of two-dimensional ultrasonic rolling on grain size and micro-hardness of 7075 aluminum alloy , 2020 .

[18]  F. Yusof.  Three-dimensional assessments of crack tip constraint , 2019, Theoretical and Applied Fracture Mechanics.

[19]  U. Ramamurty,et al.  Microstructural optimization through heat treatment for enhancing the fracture toughness and fatigue crack growth resistance of selective laser melted Ti 6Al 4V alloy , 2019, Acta Materialia.

[20]  S. M. Ahmadi,et al.  From microstructural design to surface engineering: A tailored approach for improving fatigue life of additively manufactured meta-biomaterials. , 2019, Acta biomaterialia.

[21]  Iadicola Jones,et al.  A Good Practices Guide for Digital Image Correlation , 2018 .

[22]  Wang Guifeng,et al.  Unified constraint parameter based on crack-tip opening displacement , 2018, Engineering Fracture Mechanics.

[23]  J. Lewandowski,et al.  Effects of thickness and orientation on the small scale fracture behaviour of additively manufactured Ti-6Al-4V , 2018, Materials Characterization.

[24]  O. Prakash,et al.  Micro-and meso-structures and their influence on mechanical properties of selectively laser melted Ti-6Al-4V , 2018, Acta Materialia.

[25]  T. Becker,et al.  Selective Laser Melting Produced Ti-6Al-4V: Post-Process Heat Treatments to Achieve Superior Tensile Properties , 2018, Materials.

[26]  F. Berto,et al.  T-stress effects on fatigue crack growth – Theory and experiment , 2017 .

[27]  Michael Gschweitl,et al.  Qualification of AM parts: Extreme value statistics applied to tomographic measurements , 2017 .

[28]  Lei Zhang,et al.  A comprehensive solution to miniaturized tensile testing: Specimen geometry optimization and extraction of constitutive behaviors using inverse FEM procedure , 2017 .

[29]  R. Pippan,et al.  Fatigue crack closure: a review of the physical phenomena , 2017, Fatigue & fracture of engineering materials & structures.

[30]  A. Rostami,et al.  Effects of annealing temperature and quenching medium on microstructure, mechanical properties as well as fatigue behavior of Ti-6Al-4V alloy , 2017 .

[31]  D. C. Blaine,et al.  INFLUENCE OF HEAT TREATMENTS ON THE MICROSTRUCTURE AND TENSILE BEHAVIOUR OF SELECTIVE LASER MELTING-PRODUCED TI-6AL-4V PARTS , 2016 .

[32]  Zemin Wang,et al.  Formation and control of martensite in Ti-6Al-4V alloy produced by selective laser melting , 2016 .

[33]  Jani Romanoff,et al.  Characterisation of local grain size variation of welded structural steel , 2016, Welding in the World.

[34]  J. Boselli,et al.  Effect of plate thickness on the environmental fatigue crack growth behavior of AA7085-T7451 , 2016 .

[35]  M. R. Molteno,et al.  Mode I–III Decomposition of the J‐integral from DIC Displacement Data , 2015 .

[36]  M. Ramji,et al.  A linear least squares approach for evaluation of crack tip stress field parameters using DIC , 2015 .

[37]  Xinping Zhang,et al.  Size effects on tensile strength of aluminum–bronze alloy at room temperature , 2015 .

[38]  Y. Ono,et al.  Effect of microstructure on high-cycle fatigue properties of Ti-6Al-4V alloy forging at cryogenic temperatures , 2014 .

[39]  J. Romanoff,et al.  Influence of grain size distribution on the Hall-Petch relationship of welded structural steel , 2014 .

[40]  J. Kruth,et al.  Heat treatment of Ti6Al4V produced by Selective Laser Melting: Microstructure and mechanical properties , 2012 .

[41]  R. H. Dodds,et al.  T-stress effects on steady crack growth in a thin, ductile plate under small-scale yielding conditions: Three-dimensional modeling , 2011 .

[42]  M. Ayatollahi,et al.  An over‐deterministic method for calculation of coefficients of crack tip asymptotic field from finite element analysis , 2011 .

[43]  Konrad Wissenbach,et al.  Ductility of a Ti‐6Al‐4V alloy produced by selective laser melting of prealloyed powders , 2010 .

[44]  J. Yates,et al.  Quantifying crack tip displacement fields with DIC , 2010 .

[45]  James C. Newman,et al.  Crack closure under high load ratio and Kmax test conditions , 2010 .

[46]  Dieter Siegele,et al.  Experimental and numerical analysis of in-plane and out-of-plane crack tip constraint characterization by secondary fracture parameters , 2007 .

[47]  T. Ogawa,et al.  Evaluating mixed-mode stress intensity factors from full-field displacement fields obtained by optical methods , 2007 .

[48]  Robert H. Dodds,et al.  Effect of T-stress on fatigue crack closure in 3-D small-scale yielding , 2004 .

[49]  K. Sadananda,et al.  Role of crack tip plasticity in fatigue crack growth , 2001 .

[50]  K. Sadananda,et al.  A REVIEW OF CRACK CLOSURE, FATIGUE CRACK THRESHOLD AND RELATED PHENOMENA , 1994 .

[51]  Wanlin Guo.  Elastoplastic three dimensional crack border field—II. Asymptotic solution for the field , 1993 .

[52]  Wanlin Guo.  Elastoplastic three dimensional crack border field—I. Singular structure of the field , 1993 .

[53]  A. G. Varias,et al.  Quasi-static crack advance under a range of constraints—Steady-state fields based on a characteristic length , 1993 .

[54]  G. E. Lucas,et al.  The development of small specimen mechanical test techniques , 1983 .

[55]  M. Williams,et al.  On the Stress Distribution at the Base of a Stationary Crack , 1956 .

[56]  L. Stepanova,et al.  Importance of the Higher Order Terms of the Williams series expansion: Experimental Aspects and Finite Element Simulations , 2022, Procedia Structural Integrity.

[57]  G. Baxter,et al.  Development of a novel methodology to study fatigue properties using the small punch test , 2019, Materials Science & Engineering: A.

[58]  Reinhard Pippan,et al.  Modified Kitagawa–Takahashi diagram accounting for finite notch depths , 2015 .

[59]  B. Van Hooreweder,et al.  Crack propagation and fracture toughness of Ti6Al4V alloy produced by selective laser melting , 2015 .

[60]  Rinze Benedictus,et al.  A review of T-stress and its effects in fracture mechanics , 2015 .

[61]  F. Ellyin,et al.  On the size of plastic zone ahead of crack tip , 1986 .

[62]  J. Newman.  A crack-closure model for predicting fatigue crack growth under aircraft spectrum loading , 1981 .