A review of turbulence measurement techniques for flotation

Flotation is one of the most important primary separation processes in the minerals industry. As far as the mechanism of flotation is concerned, turbulence is one of the key parameters determining flotation performance because it affects three main processes: suspension of particles, air dispersion and particle-bubble collision, attachment and detachment. To study turbulence in industrial flotation cells, both numerical simulation and experimental measurement can be performed. Development of turbulence models and validation of Computational Fluid Dynamic (CFD) numerical simulation need experimental data obtained from turbulence measurement techniques that can be used in the three phase abrasive opaque environment present in a flotation cell. In this paper, the different techniques which have been used to characterise turbulence in the literature are reviewed in terms of their basic principles, system structure, range of application and limitations. Laser Doppler Anemometry (LDA), Particle Image Velocimetry (PIV), Constant Temperature Anemometer (CTA) and the Aeroprobe are all techniques that have been widely used to characterise the turbulence created in flotation machines operating with only fluid (or fluid and air). They cannot however be used when the concentration of solids is high as commonly occurs in a flotation machine. Techniques that have been identified that have the potential to be used to produce accurate measurements in three phase flows include Positron Emission Particle Tracking (PEPT), Piezoelectric Vibration Sensor (PVS) and Electrical Resistance Tomography (ERT). It is envisaged that applications of PEPT in three phase flotation cells will mostly be confined to studies at the laboratory scale. ERT has been tested in flotation cells filled with water and air but needs more development before it can be applied confidently in industrial scale flotation units. PVS, on the other hand, has been validated at laboratory scale and has been applied successfully for measuring turbulence in large scale operating flotation machines.

[1]  Stephen J. Neethling,et al.  Electrical resistance tomography using a bi-directional current pulse technique , 2001 .

[2]  Kai Fallenius.  Turbulence in flotation cells , 1987 .

[3]  Mohsen Karimi,et al.  A computational fluid dynamics model for the flotation rate constant, Part I: Model development , 2014 .

[4]  M. P. Schwarz,et al.  CDF simulation of bubble-particle collisions in mineral flotation cells , 2000 .

[5]  Preben Buchhave,et al.  Particle image velocimetry - Status and trends , 1992 .

[6]  Dee Bradshaw,et al.  Influence of turbulence kinetic energy on bubble size in different scale flotation cells , 2013 .

[7]  Rex Klopfenstein,et al.  Air velocity and flow measurement using a Pitot tube , 1998 .

[8]  Bjørn H. Hjertager,et al.  LDA measurements and CFD modelling of gas-liquid flow in a stirred vessel , 1996 .

[9]  N. Sad Chemloul,et al.  Particle velocity detection and measurement in two-phase flow using combined electronic logic system and LDA technique , 2010 .

[10]  Anders Rasmuson,et al.  LDA measurements of near wall powder velocities in a high shear mixer , 2007 .

[11]  R. Jeffrey Lytle,et al.  Iterative Ray Tracing between Boreholes for Underground Image Reconstruction , 1980, IEEE Transactions on Geoscience and Remote Sensing.

[12]  Serafim Bakalis,et al.  Using positron emission particle tracking (PEPT) to study the turbulent flow in a baffled vessel agitated by a Rushton turbine: Improving data treatment and validation , 2011 .

[13]  P.T.L. Koh,et al.  Mixing and gas dispersion in mineral flotation cells , 2008 .

[14]  M. Vakili,et al.  CFD analysis of turbulence in a baffled stirred tank, a three-compartment model , 2009 .

[15]  K. Runge,et al.  The effect of cell hydrodynamics on flotation kinetics , 2012 .

[16]  Adesoji A. Adesina,et al.  Electrical resistance tomography-assisted analysis of dispersed phase hold-up in a gas-inducing mechanically stirred vessel , 2011 .

[17]  Kym Runge,et al.  Measuring turbulence in a flotation cell using the piezoelectric sensor , 2014 .

[18]  Julian F. Scott,et al.  An Introduction to Turbulent Flow , 2000 .

[19]  Franz Durst,et al.  Experimental investigation of local bubble size distributions in stirred vessels using Phase Doppler Anemometry , 2000 .

[20]  Robert F. Mudde,et al.  Performance of 4-tip Optical Fiber Probe and Bubble Characterizations by the Probe in Turbulent Bubbly Flows , 2001 .

[21]  J. Franzidis,et al.  Studies on impeller type, impeller speed and air flow rate in an industrial scale flotation cell. Part 4: Effect of bubble surface area flux on flotation performance☆ , 1997 .

[22]  R. Lytle,et al.  Computerized geophysical tomography , 1979, Proceedings of the IEEE.

[23]  C. J. Meyer,et al.  Numerical modelling of non-Newtonian slurry in a mechanical flotation cell , 2009 .

[24]  Xianfeng Fan,et al.  Positron emission particle tracking as a method to map the movement of particles in the pulp and froth phases , 2008 .

[25]  A. Cenedese,et al.  LDA spectral measurements in a turbulent boundary layer , 1992 .

[26]  Marko Laakkonen,et al.  Local bubble size distributions, gas–liquid interfacial areas and gas holdups in a stirred vessel with particle image velocimetry , 2005 .

[27]  Sameer H. Morar,et al.  Froth imaging, air recovery and bubble loading to describe flotation bank performance , 2007 .

[28]  Mi Wang,et al.  Electrical resistance tomography for process applications , 1996 .

[29]  H. Do.  Development of a turbulent flotation model from first principles , 2010 .

[30]  B. Tribollet,et al.  Near-wall turbulence in drag reducing flows investigated by the photolithography-electrochemical probes , 2004 .

[31]  Mark M. Clark,et al.  Turbulence in flocculators: Effects of tank size and impeller type , 1997 .

[32]  Sameer H. Morar,et al.  The use of the froth surface lamellae burst rate as a flotation froth stability measurement , 2012 .

[33]  L. Durlofsky,et al.  Experimental study of two and three phase flows in large diameter inclined pipes , 2003 .

[34]  R. Pérez-Garibay,et al.  On-Line Gas Hold-Up Measurement in Flotation Columns , 1999 .

[35]  James A. Finch,et al.  Industrial testing of a gas holdup sensor for flotation systems , 2003 .

[36]  Ryan Stevenson,et al.  Assessing solids concentration homogeneity in Rushton-agitated slurry reactors using electrical resistance tomography (ERT) , 2012 .

[37]  M. Maldonado,et al.  An update on the estimation of the froth depth using conductivity measurements , 2008 .

[38]  Mi Wang,et al.  Measuring Flowing Foam Density Distributions Using ERT , 1999 .

[39]  Pavlos Vlachos,et al.  Evaluation of multiphase flotation models in grid turbulence via Particle Image Velocimetry , 2006 .

[40]  F. Farhani,et al.  Practical considerations for validity of constant temperature anemometer flow measurements in industrial applications , 2010 .

[41]  Jan J. Cilliers,et al.  Detecting non-uniform foam density using electrical resistance tomography , 1999 .

[42]  Kym Runge,et al.  Development and application of a technique for evaluating turbulence in a flotation cell , 2012 .

[43]  David Isaacson,et al.  Electrical Impedance Tomography , 1999, SIAM Rev..

[44]  Stephen J. Neethling,et al.  A novel approach for estimating the average bubble size for foams flowing in vertical columns , 2004 .

[45]  Geoffrey F. Hewitt,et al.  Measurement of bubble size distribution using a flying optical probe technique: Application in the highly turbulent region above a distillation plate , 2007 .

[46]  Kevin J. Roberts,et al.  Scale up study of retreat curve impeller stirred tanks using LDA measurements and CFD simulation. , 2005 .

[47]  René del Villar,et al.  Estimation of Bias and Entrainment in Flotation Columns Using Conductivity Measurements , 1997 .

[48]  Douglas W. Fuerstenau,et al.  Froth flotation : 50th anniversary volume , 1962 .

[49]  Yong Yan,et al.  Air–water two-phase flow measurement using a Venturi meter and an electrical resistance tomography sensor , 2010 .

[50]  Agnès Montillet,et al.  Diagnostic of flow disturbances in a cross-shaped micromixer using wall electrochemical probes , 2013 .

[51]  Mohsen Karimi,et al.  A CFD-kinetic model for the flotation rate constant, Part II: Model validation , 2014 .

[52]  Jean-Marc Hérard,et al.  A three-phase flow model , 2007, Math. Comput. Model..

[53]  E. W. Randall,et al.  A 1000-measurement frames/second ERT data capture system with real-time visualization , 2005, IEEE Sensors Journal.

[54]  H. Schubert.  On the turbulence-controlled microprocesses in flotation machines , 1999 .

[55]  M. P. Schwarz,et al.  CFD-based multiscale modelling of bubble–particle collision efficiency in a turbulent flotation cell , 2009 .

[56]  John R. Chaplin,et al.  Optical fibre probe measurements of bubbly flow in hydraulic jumps , 2005 .

[57]  J. Cilliers,et al.  PEPT combined with high speed digital imaging for particle tracking in dynamic foams , 2010 .

[58]  Bo G Leckner,et al.  Experimental estimation of particle flow fluctuations in dense unsteady two-phase flow using phase Doppler anemometry , 2007 .

[59]  Alain H. Cartellier,et al.  Measurement of gas phase characteristics using new monofiber optical probes and real-time signal processing , 1998 .

[60]  Bernard Tribollet,et al.  Spectral analysis of wall turbulence with photolithography devised electrochemical probes , 1993 .

[61]  F. X. Grau,et al.  Frequency response of an electrochemical probe to the wall shear stress fluctuations of a turbulent channel flow , 2008 .

[62]  A. Doudou,et al.  Estimation of turbulence spectra in flows of hard conditions sensed with LDA , 2007 .

[63]  S. Martemianov,et al.  ON THE STUDY OF ELECTROCHEMICAL TURBULENT NOISE IN A STIRRED VESSEL , 2003 .

[64]  Jovicic Gordana,et al.  Dy:YAG及びDy:Er:YAG粒子を加える乱流高温ガス流における燐光体温度測定 , 2015 .

[65]  P.T.L. Koh,et al.  CFD MODELLING OF BUBBLE-PARTICLE ATTACHMENTS IN FLOTATION CELLS , 2006 .

[66]  Lewis F. Richardson,et al.  Weather Prediction by Numerical Process , 1922 .

[67]  Kym Runge,et al.  Development and application of a piezoelectric sensor for turbulence measurement in industrial flotation cells , 2014 .

[68]  Jan J. Cilliers,et al.  An ERT system for research on dynamic foams , 2012 .

[69]  James A. Finch,et al.  Gas holdup in flotation columns: laboratory measurements , 2001 .

[70]  R. F. Mudde,et al.  Application of LDA to bubbly flows , 1998 .

[71]  C. J. Bates,et al.  Annular two-phase flow measurements using phase Doppler anemometry with scattering angles of 30° and 70° , 1995 .

[72]  Lin Li,et al.  Numerical simulation of a self-absorbing microbubble generator for a cyclonic-static microbubble flotation column , 2010 .

[73]  L M Heikkinen,et al.  Electrical tomography imaging of flotation process in a mechanical flotation cell , 2009 .

[74]  D. A. Deglon,et al.  A model to relate the flotation rate constant and the bubble surface area flux in mechanical flotation cells , 1999 .

[75]  Emmanuel Manlapig,et al.  Comparison of gas hold-up distribution measurement in a flotation cell using capturing and conductivity techniques , 2006 .

[76]  F. Mayinger,et al.  Optical measurements : techniques and applications , 2001 .

[77]  H. Delmas,et al.  Electrochemical probe for bubble size prediction in a bubble column , 1997 .

[78]  Liang-Shih Fan,et al.  Turbulence energy distributions in bubbling gas–liquid and gas–liquid–solid flow systems , 2004 .

[79]  Feng Dong,et al.  Design of Parallel Electrical Resistance Tomography System for Measuring Multiphase Flow , 2012 .

[80]  D. A. Deglon,et al.  The effect of energy input on the flotation of quartz in an oscillating grid flotation cell , 2012 .

[81]  G. Vilar,et al.  On line analysis of structure of dispersions in an oscillatory baffled reactor using electrical impedance tomography , 2008 .

[82]  Pavlos Vlachos,et al.  Methods for Digital Particle Image Sizing (DPIS): Comparisons and improvements , 2009 .

[83]  Aniruddha B. Pandit,et al.  Efficacy of a spinning disc as a bubble break-up device , 1998 .

[84]  David Parker,et al.  Positron emission particle tracking in a mechanically agitated solid–liquid suspension of coarse particles , 2009 .

[85]  Kym Runge,et al.  Measuring turbulence in a flotation cell using electrical resistance tomography , 2015 .

[86]  F. E. Jørgensen,et al.  How to measure turbulence with hot-wire anemometers - a practical guide , 2002 .

[87]  James A. Finch,et al.  Measurement of radial gas holdup profiles in a flotation column , 1992 .

[88]  Graeme J. Jameson,et al.  Influence of grid-generated turbulence on detachment of a bubble anchored to a vertical cylindrical surface: Application to mineral flotation Systems , 2013 .

[89]  S. Grano,et al.  Hydrodynamics and scale up in Rushton turbine flotation cells: Part 2. Flotation scale-up for laboratory and pilot cells , 2006 .

[90]  Dee Bradshaw,et al.  Tracking the motion of particle-bubble aggregates in flotation using PEPT , 2012 .

[91]  S. A. Sherif.  On the propagation of random errors of constant-temperature anemometers in nonisothermal flows , 1997 .

[92]  L M Heikkinen,et al.  Application of three-dimensional electrical resistance tomography to characterize gas holdup distribution in laboratory flotation cell , 2011 .

[93]  Ian Grant,et al.  The effect of flow turbulence and interrogating beam profile on particle image velocimetry fringes , 1989 .

[94]  Haibo Jin,et al.  Analysis of bubble behaviors in bubble columns using electrical resistance tomography , 2007 .

[95]  Nick J. Miles,et al.  Examination of swirling flow using electrical resistance tomography , 2006 .

[96]  Alvin W. Nienow,et al.  Positron emission particle tracking (PEPT) compared to particle image velocimetry (PIV) for studying the flow generated by a pitched-blade turbine in single phase and multi-phase systems , 2009 .