Simulations of unprotected loss of heat sink and combination of events accidents for a molten salt reactor

Abstract The molten salt reactor (MSR) is one of the Generation IV reactors. The fuel is dissolved in the carrier salt and circulates in the loop. The technologies are different from that in the solid-fuel reactors. In this work, the attention is focused on development of safety analysis tool for the MSRs. A single channel model, a heat transfer model, a heat sink model and a liquid-fuel point kinetic model that takes into account the effect of circulation are employed. The validation of this code is done with the experimental data of pump coastdown and startup in MSRE. The unprotected loss of heat sink (ULOHS), combination of ULOHS and unprotected loss of flow (ULOF) are performed on the Molten Salt Actinide Recycler and Transmuter (MOSART). This work aims to study temperature fluctuation, corresponding power change, effect of flow delayed neutron precursors and temperature reactivity feedback in transient accident to examine the inherent safety design of MOSART. The transient results reveal that the large negative temperature feedback coefficients guarantee MOSART inherent safety and the range of temperature is within the safety margin in case of combination of accidental events.

[1]  Frank-Peter Weiss,et al.  DYN1D-MSR dynamics code for molten salt reactors , 2005 .

[2]  Marco Enrico Ricotti,et al.  A multi-physics modelling approach to the dynamics of Molten Salt Reactors , 2011 .

[3]  Frank-Peter Weiss,et al.  DYN3D-MSR spatial dynamics code for molten salt reactors , 2007 .

[4]  Takashi Suzuki,et al.  Steady State Analysis of Molten Salt Reactor in Consideration of the Effect of Fuel Salt Flow , 2004 .

[5]  Guanghui Su,et al.  Analysis on the neutron kinetics for a molten salt reactor , 2009 .

[6]  Piero Ravetto,et al.  Neutron kinetics of fluid–fuel systems by the quasi-static method , 2004 .

[7]  Nuclear Emergency Response Headquarters.  Report of Japanese Government to the IAEA Ministerial Conference on Nuclear Safety : the Accident at TEPCO's Fukushima Nuclear Power Stations , 2011 .

[8]  U. S. Doe.  A Technology Roadmap for Generation IV Nuclear Energy Systems , 2002 .

[9]  Guanghui Su,et al.  Development of a steady state analysis code for a molten salt reactor , 2009 .

[10]  G. Ritter,et al.  Effective delayed neutron fraction for fluid-fuel systems , 2000 .

[11]  Yoichiro Shimazu,et al.  Preliminary Safety Analysis on Depressurization Accident without Scram of a Molten Salt Reactor , 2006 .

[12]  Dalin Zhang,et al.  Development of a safety analysis code for molten salt reactors , 2009 .

[13]  C. Forsberg,et al.  Liquid Salt Applications and Molten Salt Reactors , 2007 .

[14]  Yoshiaki Oka,et al.  SAFETY OF THE SUPER LWR , 2007 .

[15]  Yoichiro Shimazu,et al.  Reactivity-Initiated-Accident Analysis without Scram of a Molten Salt Reactor , 2008 .

[16]  P. N. Haubenreich,et al.  ZERO-POWER PHYSICS EXPERIMENTS ON THE MOLTEN-SALT REACTOR EXPERIMENT. , 1968 .

[17]  C. W. Gear,et al.  Numerical initial value problem~ in ordinary differential eqttations , 1971 .

[18]  Werner Maschek,et al.  Molten salt related extensions of the SIMMER-III code and its application for a burner reactor , 2006 .