Human Biomechanical Model Based Optimal Design of Assistive Shoulder Exoskeleton

Robotic exoskeletons are being developed to assist humans in tasks such as robotic rehabilitation, assistive living, industrial and other service applications. Exoskeletons for the upper limb are required to encompass the shoulder whilst achieving a range of motion so as to not impede the wearer, avoid collisions with the wearer, and avoid kinematic singularities during operation. However this is particularly challenging due to the large range of motion of the human shoulder. In this paper a biomechanical model based optimisation is applied to the design of a shoulder exoskeleton with the objective of maximising shoulder range of motion. A biomechanical model defines the healthy range of motion of the human shoulder. A genetic algorithm maximises the range of motion of the exoskeleton towards that of the human, whilst taking into account collisions and kinematic singularities. It is shown how the optimisation can increase the exoskeleton range of motion towards that equivalent of the human, or towards a subset of human range of motion relevant to specific applications.

[1]  S.J. Ball,et al.  MEDARM: a rehabilitation robot with 5DOF at the shoulder complex , 2007, 2007 IEEE/ASME international conference on advanced intelligent mechatronics.

[2]  Robert Riener,et al.  ARMin II - 7 DoF rehabilitation robot: mechanics and kinematics , 2007, Proceedings 2007 IEEE International Conference on Robotics and Automation.

[3]  Craig R. Carignan,et al.  Development of an exoskeleton haptic interface for virtual task training , 2009, 2009 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[4]  Shigeki Toyama,et al.  Development of Wearable-Agri-Robot ∼mechanism for agricultural work∼ , 2009, 2009 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[5]  Dikai Liu,et al.  Investigation of reducing fatigue and musculoskeletal disorder with passive actuators , 2010, 2010 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[6]  A. E. Engin,et al.  On the biomechanics of the shoulder complex. , 1980, Journal of biomechanics.

[7]  Richard M. Murray,et al.  A Mathematical Introduction to Robotic Manipulation , 1994 .

[8]  C. Carignan,et al.  Design of an arm exoskeleton with scapula motion for shoulder rehabilitation , 2005, ICAR '05. Proceedings., 12th International Conference on Advanced Robotics, 2005..

[9]  David J. Reinkensmeyer,et al.  Optimization of a Parallel Shoulder Mechanism to Achieve a High-Force, Low-Mass, Robotic-Arm Exoskeleton , 2010, IEEE Transactions on Robotics.

[10]  G R Johnson,et al.  The design of a five-degree-of-freedom powered orthosis for the upper limb , 2001, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

[11]  J. Lenarcic,et al.  Simple Model of Human Arm Reachable Workspace , 1994, IEEE Trans. Syst. Man Cybern. Syst..

[12]  Dikai Liu,et al.  Estimating Physical Assistance Need Using a Musculoskeletal Model , 2013, IEEE Transactions on Biomedical Engineering.

[13]  J.C. Perry,et al.  Upper-Limb Powered Exoskeleton Design , 2007, IEEE/ASME Transactions on Mechatronics.

[14]  Sheng Quan Xie,et al.  Exoskeleton robots for upper-limb rehabilitation: state of the art and future prospects. , 2012, Medical engineering & physics.

[15]  Dikai Liu,et al.  Towards using musculoskeletal models for intelligent control of physically assistive robots , 2011, 2011 Annual International Conference of the IEEE Engineering in Medicine and Biology Society.

[16]  N Klopcar,et al.  A kinematic model of the shoulder complex to evaluate the arm-reachable workspace. , 2007, Journal of biomechanics.

[17]  M. Ishii,et al.  Stand alone wearable power assisting suit - sensing and control systems , 2004, RO-MAN 2004. 13th IEEE International Workshop on Robot and Human Interactive Communication (IEEE Catalog No.04TH8759).