Flight control design for a highly flexible flutter demonstrator

The paper presents the control design approaches for the European research project FLEXOP. The ultimate goal is to develop and apply active flutter suppression and load alleviation techniques on an unmanned flying aircraft demonstrator. Due to the flexible wing of the aircraft new challenges rise for the control design: the traditional rigid body (baseline) control loops have to be augmented with flutter control laws. In our approach, the controllers are designed based on a dynamicalmodel, which is briefly discussed first. Details of the baseline control design, as well as the two different flutter suppression algorithms are discussed in the paper. Hardware-in-the-Loop testing of the controllers are reported before the first test flights of the aircraft.

[1]  Frank L. Lewis,et al.  Aircraft control and simulation: Dynamics, controls design, and autonomous systems: Third edition , 2015 .

[2]  Christian Breitsamter,et al.  Aircraft Design and Testing of FLEXOP Unmanned Flying Demonstrator to Test Load Alleviation and Flutter Suppression of High Aspect Ratio Flexible Wings , 2019, AIAA Scitech 2019 Forum.

[3]  Mirko Hornung,et al.  Mission and Aircraft Design of FLEXOP Unmanned Flying Demonstrator to Test Flutter Suppression within Visual Line of Sight , 2017 .

[4]  P. Apkarian,et al.  Nonsmooth H ∞ synthesis , 2005 .

[5]  Pierre Apkarian,et al.  Structured H∞ Synthesis in MATLAB , 2011 .

[6]  Pierre Apkarian,et al.  Multi-model, multi-objective tuning of fixed-structure controllers , 2014, 2014 European Control Conference (ECC).

[7]  Peter J Seiler,et al.  Worst-Case Disturbances for Time-Varying Systems with Application to Flexible Aircraft , 2019, Journal of Guidance, Control, and Dynamics.

[8]  Pierre Apkarian,et al.  Parametric Robust Structured Control Design , 2014, IEEE Transactions on Automatic Control.

[9]  Daniel Ossmann,et al.  Aeroservoelastic Modeling and Analysis of a Highly Flexible Flutter Demonstrator , 2018, 2018 Atmospheric Flight Mechanics Conference.

[10]  Andrés Marcos,et al.  Flight testing of an structured H-infinity controller: An EU-Japan collaborative experience , 2017, 2017 IEEE Conference on Control Technology and Applications (CCTA).

[11]  Manuel Pusch.  Aeroelastic Mode Control using H2-optimal Blends for Inputs and Outputs , 2018 .

[12]  Gertjan Looye,et al.  UNIFYING MANOEUVRE AND GUST LOADS ANALYSIS MODELS , 2009 .

[13]  Gertjan Looye,et al.  A Variable, Fully Flexible Dynamic Response Tool for Special Investigations (VarLoads) , 2003 .

[14]  Mirko Hornung,et al.  Designing an UAV Propulsion System for Dedicated Acceleration and Deceleration Requirements , 2017 .

[15]  Pierre Apkarian,et al.  Nonsmooth H∞ synthesis , 2005, IEEE Trans. Autom. Control..

[16]  Peter Thomasson,et al.  Aircraft Control and Simulation: Dynamics, Controls Design, and Autonomous Systems – Third edition B. L. Stevenset al. John Wiley and Sons, The Atrium, Southern Gate, Chichester, West Sussex, UK, PO19 8SQ. 2016. 749pp. Illustrated. £110. ISBN 978-1-118-87098-3. , 2017, The Aeronautical Journal.

[17]  Peter J Seiler,et al.  Robust control design for active flutter suppression , 2016 .

[18]  M. Karpel,et al.  Reduced-order aeroelastic models via dynamic residualization , 1990 .