Rapid analysis manipulator program (RAMP) as a design tool for serial revolute robots

This paper describes a program (RAMP) which facilitates robot design analysis, project management, and design documentation. Requirements for such a program are proposed, and the literature is investigated. Design of the program is discussed in an object-oriented manner, and the system-level objects are described. The extent and method of implemented analysis objects is presented in more detail. Examples of use are discussed in terms of component selection, deflection analysis, and end-effector position error. Finally, the future augmentation of RAMP is described.

[1]  Mo M. Jamshidi,et al.  ROBO_SIM: A robotics simulation environment on personal computers , 1992, Robotics Auton. Syst..

[2]  Arthur G. Erdman,et al.  Kinematic/kinetic performance analysis and design tools for robotic mechanisms , 1994 .

[3]  Andrew K. C. Wong,et al.  A kinematic design optimization of robot manipulators , 1992, Proceedings 1992 IEEE International Conference on Robotics and Automation.

[4]  Delbert Tesar,et al.  Optimal actuator stiffness distribution for robotic manipulators based on local dynamic criteria , 1985, Proceedings. 1985 IEEE International Conference on Robotics and Automation.

[5]  Delbert Tesar,et al.  Dynamic modeling of serial manipulator arms , 1981 .

[6]  Miomir Vukobratovic,et al.  SYM-program environment for manipulator modeling, control and simulation , 1991, Proceedings. 1991 IEEE International Conference on Robotics and Automation.

[7]  Delbert Tesar,et al.  OPTIMAL ACTUATOR SIZING FOR ROBOTIC MANIPULATORS BASED ON LOCAL DYNAMIC CRITERIA. , 1984 .

[8]  Roy Kornbluh,et al.  Design of compliance in robots , 1988, Proceedings. 1988 IEEE International Conference on Robotics and Automation.

[9]  Jorge Angeles,et al.  Optimum design of manipulators under dynamic isotropy conditions , 1993, [1993] Proceedings IEEE International Conference on Robotics and Automation.

[10]  Delbert Tesar,et al.  Deflection prediction for serial manipulators , 1988, Proceedings. 1988 IEEE International Conference on Robotics and Automation.

[11]  Grady Booch,et al.  Object-Oriented Analysis and Design with Applications , 1990 .