Influence of parameters and optimization of EDM performance measures on MDN 300 steel using Taguchi method

Maraging steel (MDN 300) exhibits high levels of strength and hardness. Optimization of performance measures is essential for effective machining. In this paper, Taguchi method, used to determine the influence of process parameters and optimization of electrical discharge machining (EDM) performance measures on MDN 300 steel, has been discussed. The process performance criteria such as material removal rate (MRR), tool wear rate (TWR), relative wear ratio (RWR), and surface roughness (SR) were evaluated. Discharge current, pulse on time, and pulse off time have been considered the main factors affecting EDM performance. The results of the present work reveal that the optimal level of the factors for SR and TWR are same but differs from the optimum levels of the factors for MRR and RWR. Further, discharge current, pulse on time, and pulse off time have been found to play a significant role in EDM operations. Detailed analysis of structural features of machined surface was done by using scanning electron microscope (SEM) to understand the influence of parameters. SEM of electrical discharge machining surface indicates that at higher discharge current and longer pulse on duration give rougher surface with more craters, globules of debris, pockmarks or chimneys, and microcracks than that of lower discharge current and lower pulse on duration.

[1]  I. Puertas,et al.  A study on the machining parameters optimisation of electrical discharge machining , 2003 .

[2]  Stephen T. Newman,et al.  State of the art electrical discharge machining (EDM) , 2003 .

[3]  Madhan Shridhar Phadke,et al.  Quality Engineering Using Robust Design , 1989 .

[4]  T. R. Bement,et al.  Taguchi techniques for quality engineering , 1995 .

[5]  Y. S. Tarng,et al.  Optimization of the electrical discharge machining process based on the Taguchi method with fuzzy logics , 2000 .

[6]  G. Krishna Mohana Rao,et al.  Development of hybrid model and optimization of surface roughness in electric discharge machining using artificial neural networks and genetic algorithm , 2009 .

[7]  G. M. Rao,et al.  Influence of Machining Parameters on Electric Discharge Machining of Maraging Steels - An Experimental Investigation , 2008 .

[8]  John H. Sheesley,et al.  Quality Engineering in Production Systems , 1988 .

[9]  Y. S. Tarng,et al.  Design optimization of cutting parameters for turning operations based on the Taguchi method , 1998 .

[10]  Qing Gao,et al.  Parameter optimization model in electrical discharge machining process , 2008 .

[11]  Amar Patnaik,et al.  Optimization of wire electrical discharge machining (WEDM) process parameters using Taguchi method , 2007 .

[12]  Abdulkadir Erden,et al.  A comparative study on the surface integrity of plastic mold steel due to electric discharge machining , 2005 .

[13]  Bing Wang,et al.  Study of the corrosion protection properties of Al–Zn films synthesized by IBAD , 1998 .

[14]  O. A. Abu Zeid,et al.  On the effect of electrodischarge machining parameters on the fatigue life of AISI D6 tool steel , 1997 .