A hybrid simulation optimization method for production planning of dedicated remanufacturing

This paper presents a hybrid cell evaluated genetic algorithm (CEGA) for optimization of the dedicated remanufacturing system with simulation. The paper first summarizes the special characteristics and problems of the dedicated remanufacturing. The paper then proposes a simulation model with a prioritized stochastic batch arrival mechanism, considering factors that affect the total profit. Based on the simulation model, the CEGA algorithm is developed to optimize the production planning and control policies for dedicated remanufacturing. A case study is provided based on the remanufacturing facility located at Austin, USA

[1]  Christos Zikopoulos,et al.  On the attractiveness of sorting before disassembly in remanufacturing , 2008 .

[2]  Rajesh Srivastava,et al.  Scheduling policies for remanufacturing , 1997 .

[3]  Augusto Q. Novais,et al.  An optimization model for the design of a capacitated multi-product reverse logistics network with uncertainty , 2007, Eur. J. Oper. Res..

[4]  Raul Poler,et al.  Models for production planning under uncertainty: A review ☆ , 2006 .

[5]  Mitsuo Gen,et al.  Genetic algorithms and engineering design , 1997 .

[6]  Ling Wang,et al.  A hybrid genetic algorithm-neural network strategy for simulation optimization , 2005, Appl. Math. Comput..

[7]  Christos Zikopoulos,et al.  Impact of uncertainty in the quality of returns on the profitability of a single-period refurbishing operation , 2007, Eur. J. Oper. Res..

[8]  Ihsan Sabuncuoglu,et al.  Simulation optimization: A comprehensive review on theory and applications , 2004 .

[9]  Hooi Miin Soo,et al.  Analysis of nonpreemptive priority queueing of MPLS networks with bulk arrivals , 2002, The 2002 45th Midwest Symposium on Circuits and Systems, 2002. MWSCAS-2002..

[10]  Catherine P. Koshland,et al.  Two aspects of consumption: using an exergy-based measure of degradation to advance the theory and implementation of industrial ecology , 1997 .

[11]  Erwin van der Laan,et al.  Leadtime effects and policy improvement for stochastic inventory control with remanufacturing , 2001 .

[12]  M. Eugene Merchant,et al.  A WEB-BASED SYSTEM FOR REVERSE MANUFACTURING AND PRODUCT ENVIRONMENTAL IMPACT ASSESSMENT CONSIDERING END-OF-LIFE DISPOSITIONS , 2004 .

[13]  Stefan Minner,et al.  Simple expressions for finding recovery system inventory control parameter values , 2003, J. Oper. Res. Soc..

[14]  J. A. Ventura,et al.  A procedure to evaluate switching strategies for production lines with flexible workstations , 1993 .

[15]  Marc Salomon,et al.  Strategic Issues in Product Recovery Management , 1995 .

[16]  Takeshi Hoshino,et al.  Optimization analysis for recycle-oriented manufacturing systems , 1995 .

[17]  Ruud H. Teunter,et al.  Lot-sizing for inventory systems with product recovery , 2003, Comput. Ind. Eng..

[18]  Spyros Reveliotis,et al.  Uncertainty management in optimal disassembly planning through learning-based strategies , 2007 .

[19]  David F. Pyke,et al.  Periodic review, push inventory policies for remanufacturing , 2002, Eur. J. Oper. Res..

[20]  Kjell B. Zandin,et al.  MOST® Work Measurement Systems , 1990 .

[21]  Mansooreh Mollaghasemi,et al.  A genetic algorithm and an indifference-zone ranking and selection framework for simulation optimization , 2001, Proceeding of the 2001 Winter Simulation Conference (Cat. No.01CH37304).

[22]  Roelof Kuik,et al.  On optimal inventory control with independent stochastic item returns , 2003, Eur. J. Oper. Res..

[23]  Michael C. Fu,et al.  Feature Article: Optimization for simulation: Theory vs. Practice , 2002, INFORMS J. Comput..

[24]  Matthew J. Realff,et al.  Assessing performance and uncertainty in developing carpet reverse logistics systems , 2007, Comput. Oper. Res..

[25]  S. Minner.  Strategic safety stocks in reverse logistics supply chains , 2001 .

[26]  Miquel Angel Piera Eroles,et al.  Optimization of Logistic and Manufacturing Systems through Simulation: A Colored Petri Net-Based Methodology , 2004, Simul..

[27]  Pierre Hansen,et al.  Sensitivity analysis in multiple objective linear programming: The tolerance approach , 1989 .

[28]  Masaaki Muraki,et al.  Production planning in remanufacturing/manufacturing production system , 2001, Proceedings Second International Symposium on Environmentally Conscious Design and Inverse Manufacturing.

[29]  Peter B. Luh,et al.  A Lagrangian relaxation based approach to schedule asset overhaul and repair services , 2005, IEEE Transactions on Automation Science and Engineering.

[30]  Simme Douwe Flapper,et al.  Product recovery in stochastic remanufacturing systems with multiple reuse options , 2001, Eur. J. Oper. Res..

[31]  Seyed Taghi Akhavan Niaki,et al.  Multi-response simulation optimization using genetic algorithm within desirability function framework , 2006, Appl. Math. Comput..

[32]  Rommert Dekker,et al.  Controlling inventories with stochastic item returns: A basic model , 2002, Eur. J. Oper. Res..

[33]  Erwin van der Laan,et al.  Product remanufacturing and disposal: A numerical comparison of alternative control strategies , 1996 .

[34]  Pedro M. Mateo,et al.  Optimization with simulation and multiobjective analysis in industrial decision-making: A case study , 2002, Eur. J. Oper. Res..

[35]  Eric Masanet,et al.  Product recovery with some byte: an overview of management challenges and environmental consequences in reverse manufacturing for the computer industry , 2003 .

[36]  Robert U. Ayres,et al.  Eco-efficiency, asset recovery and remanufacturing , 1997 .

[37]  Michael C. Fu,et al.  Optimization for Simulation: Theory vs. Practice , 2002 .

[38]  Ovidiu Listes,et al.  A generic stochastic model for supply-and-return network design , 2007, Comput. Oper. Res..

[39]  Hooi Miin Soo,et al.  Analysis of nonpreemptive priority queueing of DiffServ networks with bulk arrivals , 2003 .