Trends of FPGA use in Automotive Engineering

Field Programmable Gate Array (FPGA) devices have some very unique characteristics which make them adaptable and highly usable in various applications. Owing to those virtues, FPGA devices have become increasingly accepted and integrated into automotive engineering over the past decade. This paper is a study on the trends observed in the use of FPGA devices in automotive engineering, from 2004 to 2017.

[1]  Carroll G. Dase,et al.  Rapid Prototyping an FPGA-based Engine Controller for a 600cc Super-Sport Motorcycle , 2005 .

[2]  Marian P. Kazmierkowski,et al.  Contactless Energy Transfer System With FPGA-Controlled Resonant Converter , 2010, IEEE Transactions on Industrial Electronics.

[3]  Alexander Otto,et al.  COSIVU — Compact, smart and reliable drive unit for fully electric vehicles , 2016, 2016 Pan Pacific Microelectronics Symposium (Pan Pacific).

[4]  A. Garrigos,et al.  Electric Vehicle Battery Life Extension Using Ultracapacitors and an FPGA Controlled Interleaved Buck–Boost Converter , 2013, IEEE Transactions on Power Electronics.

[5]  Jim Stevens,et al.  Run-Time Services for Hybrid CPU/FPGA Systems on Chip , 2006, 2006 27th IEEE International Real-Time Systems Symposium (RTSS'06).

[6]  Ali Emadi,et al.  Making the Case for Electrified Transportation , 2015, IEEE Transactions on Transportation Electrification.

[7]  Michael Hübner,et al.  Development of driver assistance systems using virtual hardware-in-the-loop , 2014, 2014 International Symposium on Integrated Circuits (ISIC).

[8]  Naoki Ishikawa,et al.  HILS Application for Hybrid System Development , 2007 .

[9]  Manu Vyas,et al.  A strategy and framework for analysis of operational data of automotive radars for development of active safety systems , 2017, 2017 2nd IEEE International Conference on Recent Trends in Electronics, Information & Communication Technology (RTEICT).

[10]  Neeraj Suri,et al.  Model-Based Development of Distributed Embedded Real-Time Systems with the DECOS Tool-Chain , 2007 .

[11]  Kurt Veggeberg,et al.  Development of a Portable Acoustic Beamformer using FPGA Technology and Digital Microphones , 2015 .

[12]  Enrico Corti,et al.  Rapid Control Prototyping System for Combustion Control , 2005 .

[13]  Rolf Ernst,et al.  Exploring Use of Ethernet for In-Vehicle Control Applications: AFDX, TTEthernet, EtherCAT, and AVB , 2012 .

[14]  Paul Mentink,et al.  Development and Application of a Virtual NOx Sensor for Robust Heavy Duty Diesel Engine Emission Control , 2017 .

[15]  Stephen Barrett,et al.  Addressing Engine ECU Testing Challenges with FPGA-Based Engine Simulation , 2015 .

[16]  Karsten Schmidt,et al.  Hardware/Software Co-Design of an Automotive Embedded Firewall , 2017 .

[17]  Matthew Viele,et al.  A PC and FPGA Hybrid Approach to Hardware-in-the-Loop Simulation , 2004 .

[18]  Luca Sterpone,et al.  An FPGA-based testing platform for the validation of automotive powertrain ECU , 2016, 2016 IFIP/IEEE International Conference on Very Large Scale Integration (VLSI-SoC).

[19]  Frank Winters,et al.  FPGA Considerations for Automotive Applications , 2006 .

[20]  Niall E. Murphy,et al.  Driver Image Recognition and Position Using Field Programmable Gate Arrays , 2008 .

[21]  Majeed Nader,et al.  Design and Implementation of CRC Module of eCall In-Vehicle System on FPGA , 2015 .

[22]  V. Picron,et al.  Electro-Magnetic Valve Actuation System: First Steps toward Mass Production , 2008 .

[23]  Allon Adir,et al.  Using a high-level test generation expert system for testing in-car networks , 2014, 2014 51st ACM/EDAC/IEEE Design Automation Conference (DAC).

[24]  Christoph Stiller,et al.  The Role of Machine Vision for Intelligent Vehicles , 2016, IEEE Transactions on Intelligent Vehicles.

[25]  Sudhir Sharma,et al.  Using Model-Based Design to Accelerate FPGA Development for Automotive Applications , 2009 .

[26]  Kyaw Kyaw Kyaw Soe.  Driveable Automotive Electrical & Electronics Test-Board , 2017 .

[27]  S. Hammad,et al.  CAN bus analyzer and emulator , 2009, 2009 4th International Design and Test Workshop (IDT).

[28]  Matthew D. Rings.  Customizing a PXI-based Hardware-In-The-Loop Test System with LabVIEW , 2010 .

[29]  Alberto Tosi,et al.  Automotive Three-Dimensional Vision Through a Single-Photon Counting SPAD Camera , 2016, IEEE Transactions on Intelligent Transportation Systems.

[30]  Andreas Himmler,et al.  Advancements in Hardware-in-the-Loop Technology in Support of Complex Integration Testing of Embedded System Software , 2011 .

[31]  Alan Soltis.  Applying a Model-Based I/O Simulator to ECU Development Process , 2008 .

[32]  Xiaohui Lu,et al.  Data-Driven Predictive Gearshift Control for Dual-Clutch Transmissions and FPGA Implementation , 2015, IEEE Transactions on Industrial Electronics.

[33]  Chunting Chris Mi,et al.  Wireless Power Transfer for Electric Vehicle Applications , 2015, IEEE Journal of Emerging and Selected Topics in Power Electronics.

[34]  Mahendra Muli,et al.  Best Practices and Recommendations for the Model-Based Development Process , 2015 .

[35]  Yusuke Minami,et al.  Using Finite-Element Analysis Results and Field-Programmable Gate Arrays to Accelerate Hybrid Powertrain Controller Validation , 2015 .

[36]  Mallikarjun Kande,et al.  Platform for Hardware In Loop Simulation , 2016, 2016 International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM).

[37]  Manu Vyas,et al.  Modern automotive embedded systems with special mention to radars , 2017, 2017 2nd IEEE International Conference on Recent Trends in Electronics, Information & Communication Technology (RTEICT).

[38]  Yvon Savaria,et al.  A System Architecture for Smart Sensors Integration in Avionics Applications , 2012 .

[39]  Sergio Saponara,et al.  Radar Sensor Signal Acquisition and Multidimensional FFT Processing for Surveillance Applications in Transport Systems , 2017, IEEE Transactions on Instrumentation and Measurement.

[40]  Edward Winward,et al.  Innovations In Experimental Techniques For The Development of Fuel Path Control In Diesel Engines , 2010 .

[41]  Thomas Steffen,et al.  Challenges and Potential of Intra-Cycle Combustion Control for Direct Injection Diesel Engines , 2012 .

[42]  M. Mostafa,et al.  FPGA-Based Low-level CAN Protocol Testing , 2006, 2006 6th International Workshop on System on Chip for Real Time Applications.

[43]  Zhu Han,et al.  Wireless Charging Technologies: Fundamentals, Standards, and Network Applications , 2015, IEEE Communications Surveys & Tutorials.

[44]  F. Zappa,et al.  3D SPAD camera for Advanced Driver Assistance , 2017, 2017 International Conference of Electrical and Electronic Technologies for Automotive.

[45]  Komal Agrawal,et al.  Real Time Vehicular Camera Vision Acquisition System Using Field Programmable Gate Array (FPGA) , 2013 .

[46]  K. N. Kavitha,et al.  Development of a Low Cost Engine Simulator for HIL Testing , 2005 .

[47]  M Abu Anas Shuvom,et al.  Development and Analysis of Adaptive Neural Network Control for a Cybernetic Intelligent ‘iGDI’ Engine , 2015 .

[48]  Pierre Coustal,et al.  Self-Adaptive Embedded Network , 2015 .

[49]  Dave Duncan.  Verification of Robustness for FPGAs and CEH to Meet Compliance to Objectives (DO-254 and FAA Order 8110.105) , 2015 .

[50]  Thang Nguyen,et al.  FPGA-Based Development for Sophisticated Automotive Embedded Safety Critical System , 2014 .

[51]  Ruben Morales-Menendez,et al.  Fault Detection in Automotive Semi-active Suspension : Experimental Results , 2013 .