Performance of a commercial cathode-supported solid oxide fuel cells prepared by single-step infiltration of an ion-conducting electrocatalyst

[1]  P. Voorhees,et al.  Time-dependent performance changes in LSCF-infiltrated SOFC cathodes: The role of nano-particle coarsening , 2011 .

[2]  H. Buchkremer,et al.  Sintering Behavior of (La,Sr)MnO3 Type Cathodes for Planar Anode-Supported SOFCs , 2006 .

[3]  John M. Vohs,et al.  Nanostructured anodes for solid oxide fuel cells , 2009 .

[4]  Michael C. Tucker,et al.  Performance of metal-supported SOFCs with infiltrated electrodes , 2007 .

[5]  Chunwen Sun,et al.  Cathode materials for solid oxide fuel cells: a review , 2010 .

[6]  E. Wachsman,et al.  Three-Dimensional Reconstruction of Porous LSCF Cathodes , 2007 .

[7]  S. Barnett,et al.  Measurements and Modeling of Sm0.5Sr0.5CoO3-x-Ce0.9Gd0.1O1.95 SOFC Cathodes Produced Using Infiltrate Solution Additives , 2010 .

[8]  S. Simner,et al.  La(Sr)FeO3 SOFC Cathodes with Marginal Copper Doping , 2004 .

[9]  Steven J. Visco,et al.  Synthesis of Dispersed and Contiguous Nanoparticles in Solid Oxide Fuel Cell Electrodes , 2008 .

[10]  Nguyen Q. Minh,et al.  Solid oxide fuel cell technology—features and applications , 2004 .

[11]  Tal Z. Sholklapper,et al.  Synthesis and Stability of a Nanoparticle-Infiltrated Solid Oxide Fuel Cell Electrode , 2007 .

[12]  J. Vohs,et al.  The Effect of Ca, Sr, and Ba Doping on the Ionic Conductivity and Cathode Performance of LaFeO3 , 2008 .

[13]  J. Vohs,et al.  The Stability of LSF-YSZ Electrodes Prepared by Infiltration , 2007 .

[14]  S. W. Cho,et al.  Soft X-Ray Spectroscopic Study of Dense Strontium-Doped Lanthanum Manganite Cathodes for Solid Oxide Fuel Cell Applications , 2011 .

[15]  Keqin Huang,et al.  Gas-Diffusion Process in a Tubular Cathode Substrate of a SOFC II: Identification of Gas-Diffusion Process Using AC Impedance Method , 2004 .

[16]  Tal Z. Sholklapper,et al.  LSM-Infiltrated Solid Oxide Fuel Cell Cathodes , 2006 .

[17]  S. Jiang,et al.  A review of wet impregnation—An alternative method for the fabrication of high performance and nano-structured electrodes of solid oxide fuel cells , 2006 .

[18]  L. D. Jonghe,et al.  Catalyst-infiltrated supporting cathode for thin-film SOFCs , 2005 .

[19]  Raymond J. Gorte,et al.  High‐Performance SOFC Cathodes Prepared by Infiltration , 2009 .

[20]  S. Jiang,et al.  Nanostructured ( Ba , Sr ) ( Co , Fe ) O3 − δ Impregnated ( La , Sr ) MnO3 Cathode for Intermediate-Temperature Solid Oxide Fuel Cells , 2010 .

[21]  Raymond J. Gorte,et al.  Anodes for Direct Oxidation of Dry Hydrocarbons in a Solid‐Oxide Fuel Cell , 2000 .

[22]  J. Vohs,et al.  SOFC cathodes prepared by infiltration with various LSM precursors , 2006 .

[23]  W. L. Worrell,et al.  A Novel Method for Preparing Anode Cermets for Solid Oxide Fuel Cells , 1999 .

[24]  Raymond Anthony George,et al.  Reducing the manufacturing cost of tubular solid oxide fuel cell technology , 1998 .

[25]  W. L. Worrell,et al.  Cu-Ni Cermet Anodes for Direct Oxidation of Methane in Solid-Oxide Fuel Cells , 2002 .

[26]  Raymond Anthony George,et al.  Status of tubular SOFC field unit demonstrations , 2000 .

[27]  Keqin Huang,et al.  Gas-Diffusion Process in a Tubular Cathode Substrate of an SOFC I Theoretical Analysis of Gas-Diffusion Process under Cylindrical Coordinate System , 2004 .

[28]  Wayne L. Lundberg,et al.  Tubular Solid Oxide Fuel Cell/Gas Turbine Hybrid Cycle Power Systems: Status , 1999 .

[29]  Tal Z. Sholklapper,et al.  Nanostructured Solid Oxide Fuel Cell Electrodes , 2007 .