The influence of pin on the low-velocity impact performance of foam sandwich structure
暂无分享,去创建一个
[1] Xiaoqing Wu,et al. Effect of Resin Pins on the Failure Behavior of Foam Core Sandwich Beams under Three-Point Loading , 2022, ACS omega.
[2] A. Murphy,et al. Experimental and numerical study of hybrid (CFRP-GFRP) composite laminates containing circular cut-outs under shear loading , 2022, Thin-Walled Structures.
[3] B. Prusty,et al. In-Plane and Oblique Edge-on Impact on Thick Glass-Fibre/Epoxy Composite Laminates , 2022, International Journal of Impact Engineering.
[4] Weihong Zhang,et al. A novel micromechanical model to study the influence of cure process on the in-plane tensile properties of z-pinned laminates , 2022, Composite Structures.
[5] J. Simon,et al. Crushing behavior of curved Nomex honeycombs under combined shear-compression loads , 2022, International Journal of Mechanical Sciences.
[6] Wei Zhao,et al. Flame-retardant nanocoating towards high-efficiency suppression of smoke and toxic gases for polymer foam , 2022, Composites Part A: Applied Science and Manufacturing.
[7] R. Higuchi,et al. Internal low-velocity impact damage prediction in CFRP laminates using surface profiles and machine learning , 2022, Composites Part B: Engineering.
[8] F. Scarpa,et al. High-velocity impact resistance of doubly curved sandwich panels with re-entrant honeycomb and foam core , 2022, International Journal of Impact Engineering.
[9] Yi Ji,et al. Interfacial design and flexural property of CFRP/aluminum-honeycomb sandwich with Aramid-pulp micro/nano-fiber interlays , 2022, Composite Structures.
[10] Stanley Samlal,et al. Low-Velocity Impact Behavior of Foam Core Sandwich Panels with Inter-Ply and Intra-Ply Carbon/Kevlar/Epoxy Hybrid Face Sheets , 2022, Polymers.
[11] Lingtao Mao,et al. Experimental characterization and micro-modeling of transverse tension behavior for unidirectional glass fibre-reinforced composite , 2022, Composites Science and Technology.
[12] H. Fang,et al. Flexural property evaluation of web reinforced GFRP-PET foam sandwich panel: Experimental study and numerical simulation , 2022, Composites Part B: Engineering.
[13] W. Hou,et al. Study on mechanical properties of carbon fiber honeycomb curved sandwich structure and its application in engine hood , 2022, Composite Structures.
[14] Qing Li,et al. Mechanical characterization and numerical modeling on the yield and fracture behaviors of Polymethacrylimide (PMI) foam materials , 2021, International Journal of Mechanical Sciences.
[15] H. Luo,et al. Experimental and numerical study on the constrained bending-induced collapse of hexagonal honeycomb , 2021 .
[16] Chris M. Mechefske,et al. Surface and honeycomb core damage in adhesively bonded aluminum sandwich panels subjected to low-velocity impact , 2021, Composites Part B: Engineering.
[17] Lin-zhi Wu,et al. Dynamic response of polyurethane foam and fiber orthogonal corrugated sandwich structure subjected to low-velocity impact , 2021, Composite Structures.
[18] Yefei Zhu,et al. Low-velocity impact response of multilayer foam core sandwich panels with composite face sheets , 2021 .
[19] M. G. Gomes,et al. Fire resistance behaviour of GFRP-polyurethane composite sandwich panels for building floors , 2021 .
[20] Seyed Saeid Rahimian Koloor,et al. Mechanical Behaviour of Pin-Reinforced Foam Core Sandwich Panels Subjected to Low Impact Loading , 2021, Polymers.
[21] S. Sanchez-Saez,et al. Modelling of carbon/epoxy sandwich panels with agglomerated cork core subjected to impact loads , 2021, International Journal of Impact Engineering.
[22] Hongyong Jiang,et al. Energy-absorption assessments of perforated CFRP tube induced by inward-splaying trigger with different trigger radius , 2021 .
[23] Z. Zhang,et al. Enhanced electromagnetic shielding property and anisotropic shielding behavior of corrugated carbon fiber felt composite and its sandwich structure , 2021 .
[24] Yuexian Zou,et al. Compression, bending, energy absorption properties, and failure modes of composite Kagome honeycomb sandwich structure reinforced by PMI foams , 2021, Composite Structures.
[25] Qing Li,et al. On the structural parameters of honeycomb-core sandwich panels against low-velocity impact , 2021, Composites Part B: Engineering.
[26] I. Goda,et al. A computational framework for energy absorption and damage assessment of laminated composites under ballistic impact and new insights into target parameters , 2021 .
[27] A. H. Azman,et al. Review of current trends for metal-based sandwich panel: Failure mechanisms and their contribution factors , 2021 .
[28] Weihong Zhang,et al. An integrated modeling of the curing process and transverse tensile damage of unidirectional CFRP composites , 2021 .
[29] Ni Li,et al. Transverse impact damage and axial compression failure of square braided CFRP/PMI sandwich composite beams , 2021 .
[30] Hyonny Kim,et al. Honeycomb core failure mechanism of CFRP/Nomex sandwich panel under multi-angle impact of hail ice , 2021 .
[31] Meiying Zhao,et al. Broadband low-frequency vibration attenuation in 3D printed composite meta-lattice sandwich structures , 2021 .
[32] V. Nagarajan,et al. Low velocity impact and compression after impact behaviour of polyester pin-reinforced foam filled honeycomb sandwich panels , 2021, Journal of Sandwich Structures & Materials.
[33] M. Safarabadi,et al. Experimental and numerical investigation of Low-Velocity impact on steel wire reinforced foam Core/Composite skin sandwich panels , 2021 .
[34] A. Mouritz,et al. Review of z-pinned laminates and sandwich composites , 2020 .
[35] G. Minak,et al. On the modal behaviour of ultralight composite sandwich automotive panels , 2020 .
[36] Qing Li,et al. On low-velocity impact response of foam-core sandwich panels , 2020 .
[37] H. Fang,et al. Flexural creep behavior of web reinforced GFRP-balsa sandwich beams: Experimental investigation and modeling , 2020 .
[38] S. Sahu,et al. Effect of boundary support conditions on impact behavior of silicone pin‐reinforced polymer sandwich composite structure , 2020 .
[39] D. Fang,et al. An experimental investigation on low-velocity impact response of a novel corrugated sandwiched composite structure , 2020 .
[40] F. Aymerich,et al. Effect of core density on the low-velocity impact response of foam-based sandwich composites , 2020 .
[41] Jingxuan Ma,et al. Crashworthy design and energy absorption mechanisms for helicopter structures: A systematic literature review , 2020, Progress in Aerospace Sciences.
[42] Lin-zhi Wu,et al. Vibration-based damage diagnosis of composite sandwich panels with bi-directional corrugated lattice cores , 2020 .
[43] J. Y. Huang,et al. Microstructural characterization and constitutive modeling of deformation of closed-cell foams based on in situ x-ray tomography , 2020, International Journal of Plasticity.
[44] F. Musharavati,et al. Mechanical behavior of resin pin-reinforced composite sandwich panels under quasi-static indentation and three-point bending loading conditions , 2020 .
[45] Pan Zhang,et al. Experimental investigation on the performance of PVC foam core sandwich panels subjected to contact underwater explosion , 2020 .
[46] G. Lu,et al. A review of recent research on bio-inspired structures and materials for energy absorption applications , 2020 .
[47] P. Withers,et al. Soft body impact resistance of composite foam core sandwich panels with unidirectional corrugated and tubular reinforcements , 2019, International Journal of Impact Engineering.
[48] Sang-Woo Kim,et al. Numerical investigation of impact-induced damage of auxiliary composite fuel tanks on Korean Utility Helicopter , 2019, Composites Part B: Engineering.
[49] Erdem Selver,et al. Impact resistance of Z-pin-reinforced sandwich composites , 2019, Journal of Composite Materials.
[50] T. Goh,et al. Experimental investigation of macroscopic material nonlinear behavior and microscopic void volume fraction change for porous materials under uniaxial compression , 2019, Composites Part B: Engineering.
[51] Sang-Woo Kim,et al. Evaluation of bird strike-induced damages of helicopter composite fuel tank assembly based on fluid-structure interaction analysis , 2019, Composite Structures.
[52] J. Kadkhodapour,et al. Mechanical properties and energy absorbing capabilities of Z-pinned aluminum foam sandwich , 2019, Composite Structures.
[53] Milan Veljkovic,et al. Computational homogenization simulation on steel reinforced resin used in the injected bolted connections , 2019, Composite Structures.
[54] A. Herrmann,et al. Investigation of the temperature dependent impact behaviour of pin reinforced foam core sandwich structures , 2018, Composite Structures.
[55] M. Yildiz,et al. Mechanical performance of marine sandwich composites subjected to flatwise compression and flexural loading: Effect of resin pins , 2018, Journal of Sandwich Structures & Materials.
[56] V. Nagarajan,et al. Compression and low velocity impact response of sandwich panels with polyester pin-reinforced foam filled honeycomb core , 2018, Journal of Sandwich Structures & Materials.
[57] Stanley Samlal,et al. Impact study on sandwich panels with and without stitching , 2018 .
[58] Dirk Vandepitte,et al. Subcomponent development for sandwich composite wind turbine blade bonded joints analysis , 2017 .
[59] Dongfang Wang,et al. Experiment and numerical simulation of a full-scale helicopter composite cockpit structure subject to a bird strike , 2016 .
[60] Hugh Alan Bruck,et al. Flexural behavior of singly curved X-Cor® sandwich composite structures: Experiment and finite element modeling , 2015 .
[61] Hugh Alan Bruck,et al. A New Methodology for Scaling the Mechanics of Pin-reinforcement in Composite Sandwich Structures under Compression using Digital Image Correlation , 2015 .
[62] Claudio Sbarufatti,et al. Compression after impact test (CAI) on NOMEX™ honeycomb sandwich panels with thin aluminum skins , 2014 .
[63] M. R. Abdullah,et al. Flatwise compression and flexural behavior of foam core and polymer pin-reinforced foam core composite sandwich panels , 2014 .
[64] Z. Guan,et al. The energy-absorbing behaviour of foam cores reinforced with composite rods , 2014 .
[65] Li Ma,et al. Energy absorption and low velocity impact response of polyurethane foam filled pyramidal lattice core sandwich panels , 2014 .
[66] Julien Aubry,et al. Semi-continuous approach for the modeling of thin woven composite panels applied to oblique impacts on helicopter blades , 2012 .
[67] Stefanie Feih,et al. Experimental impact damage study of a z-pinned foam core sandwich composite , 2012 .
[68] Marco Giglio,et al. Investigations on sandwich core properties through an experimental–numerical approach , 2012 .
[69] Stefanie Feih,et al. Experimental analysis of the through-thickness compression properties of z-pinned sandwich composites , 2011 .
[70] Christophe Baley,et al. Improved impact performance of marine sandwich panels using through-thickness reinforcement: Experimental results , 2010 .
[71] Fan Xia,et al. Study on impact properties of through-thickness stitched foam sandwich composites , 2010 .
[72] Alastair Johnson,et al. Modelling fabric reinforced composites under impact loads , 2001 .
[73] M. Benzeggagh,et al. Measurement of mixed-mode delamination fracture toughness of unidirectional glass/epoxy composites with mixed-mode bending apparatus , 1996 .
[74] Pierre Ladevèze,et al. Damage modelling of the elementary ply for laminated composites , 1992 .