Preparation and characterization of a melamine-urea-glyoxal resin and its modified soybean adhesive

[1]  H. Bai,et al.  Soy protein-based adhesive with superior bonding strength and water resistance by designing densely crosslinking networks , 2021 .

[2]  Junliang Liu,et al.  Assessment of the physico-mechanical, thermal, and morphological properties of rubber wood modified with silica sol in combination with GU/GMU resins , 2020 .

[3]  G. Feijoo,et al.  Cradle-to-gate Life Cycle Assessment of bio-adhesives for the wood panel industry. A comparison with petrochemical alternatives. , 2020, The Science of the total environment.

[4]  S. Shi,et al.  Soy protein adhesive with bio-based epoxidized daidzein for high strength and mildew resistance , 2020 .

[5]  S. Shi,et al.  Phytic acid-assisted fabrication for soybean meal/nanofiber composite adhesive via bioinspired chelation reinforcement strategy. , 2020, Journal of hazardous materials.

[6]  Jieyu Zhang,et al.  Developing a stable high-performance soybean meal-based adhesive using a simple high-pressure homogenization technology , 2020 .

[7]  S. Shi,et al.  Preparation of a moderate viscosity, high performance and adequately-stabilized soy protein-based adhesive via recombination of protein molecules , 2020 .

[8]  V. Causin,et al.  Influence of synthesis method and melamine content of urea-melamine-formaldehyde resins to their features in cohesion, interphase, and adhesion performance , 2019, Journal of Industrial and Engineering Chemistry.

[9]  Zhenhua Gao,et al.  Effect of ambient aging during soybean meal storage on the performance of a soybean-based adhesive , 2019, Industrial Crops and Products.

[10]  Y. Mi,et al.  Storage stability of polyamidoamine-epichlorohydrin resin and its effect on the properties of defatted soybean flour-based adhesives , 2019, International Journal of Adhesion and Adhesives.

[11]  Wei Zhang,et al.  Developing Eco-friendly High-Strength Soy Adhesives with Improved Ductility through Multiphase Core–Shell Hyperbranched Polysiloxane , 2019, ACS Sustainable Chemistry & Engineering.

[12]  Wei Zhang,et al.  Reduction of energy consumption of green plywood production by implementing high-efficiency thermal conductive bio-adhesive: Assessment from pilot-scaled application , 2019, Journal of Cleaner Production.

[13]  Sujit Banerjee,et al.  Curing behavior of soy flour with phenol-formaldehyde and isocyanate resins , 2018, International Journal of Adhesion and Adhesives.

[14]  Jianzhang Li,et al.  Fully bio-based soybean adhesive in situ cross-linked by interactive network skeleton from plant oil-anchored fiber , 2018, Industrial Crops and Products.

[15]  Yanyan Zhang,et al.  Fully Biobased Composites of an Itaconic Acid Derived Unsaturated Polyester Reinforced with Cotton Fabrics , 2018, ACS Sustainable Chemistry & Engineering.

[16]  R. Sun,et al.  Eco-Friendly Phenol–Urea–Formaldehyde Co-condensed Resin Adhesives Accelerated by Resorcinol for Plywood Manufacturing , 2018, ACS omega.

[17]  Q. Gao,et al.  A High-Performance and Low-Cost Soy Flour Adhesive with a Hydroxymethyl Melamine Prepolymer , 2018, Polymers.

[18]  P. Huo,et al.  Improvement of the water resistance of soybean protein-based wood adhesive by a thermo-chemical treatment approach , 2017 .

[19]  A. Kutnar,et al.  Soy-based adhesives for wood-bonding – a review , 2017 .

[20]  A. Pizzi,et al.  Improving soy-based adhesives for wood particleboard by tannins addition , 2017, Wood Science and Technology.

[21]  Q. Gao,et al.  Properties of a soybean meal-based plywood adhesive modified by a commercial epoxy resin , 2016 .

[22]  Junyou Shi,et al.  Formulation of a novel soybean protein‐based wood adhesive with desired water resistance and technological applicability , 2016 .

[23]  X. Sun,et al.  Correlation between Physical Properties and Shear Adhesion Strength of Enzymatically Modified Soy Protein-Based Adhesives , 2015 .

[24]  S. Shi,et al.  Enhancement of mechanical and thermal properties of Poplar through the treatment of glyoxal-urea/nano-SiO2 , 2015 .

[25]  H. Hasse,et al.  Quantitative and qualitative 1H, 13C, and 15N NMR spectroscopic investigation of the urea–formaldehyde resin synthesis , 2014, Magnetic resonance in chemistry : MRC.

[26]  G. Du,et al.  Performance, Reaction Mechanism, and Characterization of Glyoxal–Monomethylol Urea (G–MMU) Resin , 2014 .

[27]  Dianhua Wu,et al.  Synthesis of a bio-based polyamidoamine-epichlorohydrin resin and its application for soy-based adhesives , 2013 .

[28]  Antonio Pizzi,et al.  Environment-Friendly Soy Flour-Based Resins Without Formaldehyde , 2008 .

[29]  A. Kandelbauer,et al.  Testing by fourier transform infrared species variation during melamine–urea–formaldehyde resin preparation , 2007 .

[30]  Kaichang Li,et al.  Investigation of soy protein-kymene® adhesive systems for wood composites , 2004 .