228.1R-03 In-Place Methods to Estimate Concrete Strength

ACI Committee Reports, Guides, Standard Practices, and Commentaries are intended for guidance in planning, designing, executing, and inspecting construction. This document is intended for the use of individuals who are competent to evaluate the significance and limitations of its content and recommendations and who will accept responsibility for the application of the material it contains. The American Concrete Institute disclaims any and all responsibility for the stated principles. The Institute shall not be liable for any loss or damage arising therefrom. Reference to this document shall not be made in contract documents. If items found in this document are desired by the Architect/Engineer to be a part of the contract documents, they shall be restated in mandatory language for incorporation by the Architect/Engineer.

[1]  R. Jones,et al.  Non-Destructive Testing of Concrete , 1962 .

[2]  Nicholas J. Carino,et al.  The Maturity Method: Theory and Application , 1984 .

[3]  M Yerner.  Overview and Progressive Finite Element Analysis of Pullout Tests , 1994 .

[4]  V M Malhotra.  Maturity concept and the estimation of concrete strength - a review , 1971 .

[5]  F. M. Bartlett,et al.  VARIATION OF IN-PLACE CONCRETE STRENGTH IN STRUCTURES , 1999 .

[6]  A. Samarin,et al.  Use of Combined Ultrasonic and ReboundHammer Method for Determiningstrength of concrete structural members , 1981 .

[7]  Nicholas J. Carino,et al.  Early Age Temperature Effects on Concrete Strength Predictionby the Maturity Method , 1983 .

[8]  V. Malhotra.  Evaluation of the pull-out test to determine strength of in-situ concrete , 1975 .

[9]  Il,et al.  Nondestructive testing and evaluation for manufacturing and construction , 1990 .

[10]  K. W. Nasser,et al.  Comparison of Nondestructive Testers of Hardened Concrete , 1987 .

[11]  M. Carlsson,et al.  Field Experience in the Use of the “Break-Off Tester” , 1984 .

[12]  Nicholas J. Carino,et al.  Review of the Skyline Plaza Collapse , 1983 .

[13]  J. H. Bungey,et al.  In-situ strength assessment of concrete - The European concrete frame building project , 2000 .

[14]  N. Carino,et al.  STATISTICAL CHARACTERISTICS OF NEW PIN PENETRATION TEST , 1989 .

[15]  Ravindra K. Dhir,et al.  Assessment of In Situ Concrete Quality by Core Testing , 1984 .

[16]  Nicholas J. Carino,et al.  Deformation and Failure in Large-Scale Pullout Tests , 1983 .

[17]  Delmar L. Bloem,et al.  Concrete Strength in Structures , 1968 .

[18]  G. Teodoru.  Use of Simultaneous Nondestructive Tests to Predict the Compressive Strength of Concrete , 1989, SP-112: Nondestructive Testing of Concrete.

[19]  Hiroshi Mori,et al.  Estimation of Concrete Strength by Combined Nondestructive Testing Method , 1984 .

[20]  LOK-TEST and CAPO-TEST pullout testing , twenty years experience , 1999 .

[21]  Frank J. Vecchio,et al.  Pulse Velocity as a Measure of Concrete Compressive Strength , 1984 .

[22]  J. A. Bickley.  The Evaluation and Acceptance of Concrete Quality by In-Place Testing , 1984 .

[23]  Nicholas J. Carino,et al.  Comparison of Analytical with Experimental Internal Strain Distribution for the Pullout Test , 1984 .

[24]  Nicholas J. Carino,et al.  Analyzing In-Place Concrete Tests by Computer , 1998 .

[25]  A. M. Leshchinsky.  Combined methods of determining control measures of concrete quality , 1991 .

[26]  William C. Stone,et al.  Effect of Geometry and Aggregate onthe Reliability of the Pullout Test , 1985 .

[27]  V. M. Malhotra,et al.  Comparison of Pullout Strength of Concrete with Compressive Strength of Cylinders and Cores, Pulse Velocity, and Rebound Number , 1980 .

[28]  S. Addelman,et al.  Fitting straight lines when both variables are subject to error. , 1978, Life sciences.

[29]  Leif J. Vincentsen,et al.  Denmark Spans Strait with Great Belt Link , 1992 .

[30]  A. McC. Murray,et al.  The "Pul l-Off" Partially Destructive Test for Concrete , 1984 .

[31]  M. Yener,et al.  On In-Place Strength of Concrete and Pullout Tests , 1984 .

[32]  Nicholas J. Carino,et al.  Maturity Function for Concretes Made With Various Cements and Admixtures , 1992 .

[33]  loan Facaoaru.  Romanian Achievements in Nondestructive Strength Testing of Concrete , 1984 .

[34]  V. Malhotra,et al.  In-Place Concrete Strength: New Pullout Methods , 1979 .

[35]  T. H. Wee,et al.  DEVELOPMENT OF STATISTICAL QUALITY ASSURANCE CRITERION FOR CONCRETE USING ULTRASONIC PULSE VELOCITY METHOD , 1999 .

[36]  A P Keiller.  A PRELIMINARY INVESTIGATION OF TEST METHODS FOR THE ASSESSMENT OF STRENGTH OF IN SITU CONCRETE , 1982 .

[37]  Nicholas J. Carino,et al.  Statistical Methods for In-Place Strength Predictions by the Pullout Test , 1986 .

[38]  Ravindra K. Dhir,et al.  Determination of In Situ Concrete Strength: Rapidly and Confidently by Nondestructive Testing , 1984 .

[39]  S. Y. Kim,et al.  Comparative Evaluation of Nondestructive Test Methods for in-Place Strength Determination , 1989 .

[40]  Wc Stone,et al.  A New Statistical Method for Prediction of Concrete Strength from In-Place Tests , 1986 .

[41]  Leon M Keer,et al.  Failure characteristics of short anchor bolts embedded in a brittle material , 1986, Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences.

[42]  Nicholas J. Carino,et al.  Finite-Element Analysis of the Pullout Test Using a Nonlinear Discrete Cracking Approach , 1987 .

[43]  Ae Long,et al.  A STUDY OF THE IN SITU VARIABILITY OF CONCRETE USING THE PULL-OFF METHOD. , 1987 .

[44]  C G Petersen.  LOK-TEST AND CAPO-TEST DEVELOPMENT AND THEIR APPLICATIONS. , 1984 .

[45]  R. L. Dilly,et al.  Pullout Test, Maturity and PC Spreadsheet Software , 1989 .

[46]  A. M. Leshchinsky,et al.  Within-test variability of some non-destructive methods for concrete strength determination , 1990 .

[47]  J. R. Leslie abd W. J. Cheesman,et al.  An Ultrasonic Method of Deterioration and Cracking in Concrete Structures , 1949 .

[48]  Nicholas J. Carino.  Statistical Methods to Evaluate in-Place Test Results , 1993 .