Matrix converter control for DFIG

The matrix converter is made up of a matrix of bidirectional switch elements. The output voltage control is achieved by switching between the allowed switching states using a predetermined sequence. Filters can be used to remove the unwanted high frequency components due to the switching. This paper proposes a matrix converter system for a double fed induction generator (DFIG) system, which is used to replace the conventional AC/DC/AC converter system.

[1]  Seung-Ki Sul,et al.  Control of unbalanced voltage PWM converter using instantaneous ripple power feedback , 1997, PESC97. Record 28th Annual IEEE Power Electronics Specialists Conference. Formerly Power Conditioning Specialists Conference 1970-71. Power Processing and Electronic Specialists Conference 1972.

[2]  V. T. Ranganathan,et al.  A simple position-sensorless algorithm for rotor-side field-oriented control of wound-rotor induction machine , 2001, IEEE Trans. Ind. Electron..

[3]  D. Borojevic,et al.  Space vector modulated three-phase to three-phase matrix converter with input power factor correction , 1995 .

[4]  M. Rivera,et al.  Comparison of Model Based Predictive Control and Fuzzy Logic Control of a DFIG with an Indirect Matrix Converter , 2012, IECON 2012 - 38th Annual Conference on IEEE Industrial Electronics Society.

[5]  Ahmet M. Hava,et al.  The matrix converter drive performance under abnormal input voltage conditions , 2002 .

[6]  Sangshin Kwak,et al.  Design and analysis of modern three-phase AC/AC power converters for AC drives and utility interface , 2005 .

[7]  R.R. Beasant,et al.  An approach to the realization of a high-power Venturini converter , 1990, 21st Annual IEEE Conference on Power Electronics Specialists.

[8]  H. Madadi Kojabadi,et al.  Simulation and experimental studies of model reference adaptive system for sensorless induction motor drive , 2005, Simul. Model. Pract. Theory.

[9]  Sedat Sünter,et al.  PSPICE MODELLING AND SIMULATION OF THE SPIM FED BY 3-TO-2 PHASE MATRIX CONVERTER , 2002 .

[10]  A. Alesina,et al.  Analysis and design of optimum-amplitude nine-switch direct AC-AC converters , 1989 .

[11]  M. Venturini,et al.  Solid-state power conversion: A Fourier analysis approach to generalized transformer synthesis , 1981 .

[12]  M. Bednář.  The Precision Simulation of the First Generation Matrix Converter , 2008 .

[13]  Patrick Wheeler,et al.  Reducing the semiconductor losses in a matrix converter , 1992 .

[14]  Ahmet M. Hava,et al.  The matrix converter drive performance under abnormal input voltage conditions , 2001, 2001 IEEE 32nd Annual Power Electronics Specialists Conference (IEEE Cat. No.01CH37230).

[15]  Ebrahim Babaei,et al.  Reduction of THD and low order harmonics with symmetrical output current for single-phase ac/ac matrix converters , 2010 .

[16]  P. Bowler,et al.  Static Power Frequency Changers , 1977 .

[17]  D. A. Khaburi,et al.  Direct Virtual Torque Control of DFIG grid connection using Indirect Matrix Converter , 2012, 2012 3rd Power Electronics and Drive Systems Technology (PEDSTC).

[18]  H.A. Toliyat,et al.  Development of modulation strategy for two-phase AC-AC matrix converters , 2005, IEEE Transactions on Energy Conversion.

[19]  A. Zuckerberger,et al.  Simulation of three-phase loaded matrix converter , 1996 .

[20]  P.W. Wheeler,et al.  A vector controlled MCT matrix converter induction motor drive with minimized commutation times and enhanced waveform quality , 2002, Conference Record of the 2002 IEEE Industry Applications Conference. 37th IAS Annual Meeting (Cat. No.02CH37344).

[21]  Sangshin Kwak,et al.  Indirect matrix converter drives for unity displacement factor and minimum switching losses , 2007 .

[22]  Paolo Tenti,et al.  AC/DC/AC PWM converter with reduced energy storage in the DC link , 1995 .

[23]  F. Blaabjerg,et al.  A new cost-effective multi-drive solution based on a two-stage direct power electronic conversion topology , 2002, Conference Record of the 2002 IEEE Industry Applications Conference. 37th IAS Annual Meeting (Cat. No.02CH37344).

[24]  S. Ghoudelbourk,et al.  Analysis of DFIG controlled by a matrix converter , 2011, International Aegean Conference on Electrical Machines and Power Electronics and Electromotion, Joint Conference.

[25]  M. Venturini.  A new sine wave in sine wave out, conversion technique which eliminates reactive elements , 1980 .

[26]  A. Alesina,et al.  Intrinsic amplitude limits and optimum design of 9-switches direct PWM AC-AC converters , 1988, PESC '88 Record., 19th Annual IEEE Power Electronics Specialists Conference.

[27]  Sedat Sünter,et al.  Matrix converter induction motor drive: modeling, simulation and control , 2003 .

[28]  Kenneth E. Okedu.  Stabilization of Fixed Speed Wind Turbine with Variable Speed Wind Turbine , 2011 .

[29]  Sedat Sünter,et al.  Slip energy recovery of a rotor-side field oriented controlled wound rotor induction motor fed by matrix converter , 2008, J. Frankl. Inst..

[30]  Hua Jin,et al.  A three-phase regulated PWM rectifier with on-line feedforward input unbalance correction , 1994, IEEE Trans. Ind. Electron..

[31]  M. E. Macias,et al.  Rotor current fuzzy control of a DFIG with an Indirect Matrix Converter , 2011, IECON 2011 - 37th Annual Conference of the IEEE Industrial Electronics Society.

[32]  Rajnikant V. Patel,et al.  An analysis and design of a force commutated three-phase PWM AC controller with input unbalance correction capability , 1992, [Proceedings] APEC '92 Seventh Annual Applied Power Electronics Conference and Exposition.

[33]  Eiji Yamada,et al.  Displacement Angle Controll of Matrix Converter , 1997 .

[34]  Thomas A. Lipo,et al.  Modeling and simulation of matrix converter/induction motor drive , 1998 .

[35]  T.A. Lipo,et al.  A novel matrix converter topology with simple commutation , 2001, Conference Record of the 2001 IEEE Industry Applications Conference. 36th IAS Annual Meeting (Cat. No.01CH37248).

[36]  J.C. Clare,et al.  A true four quadrant matrix converter induction motor drive with servo performance , 1996, PESC Record. 27th Annual IEEE Power Electronics Specialists Conference.

[37]  M. Baumann,et al.  Novel three-phase AC-DC-AC sparse matrix converter , 2002, APEC. Seventeenth Annual IEEE Applied Power Electronics Conference and Exposition (Cat. No.02CH37335).