Experimental and theoretical study of compositional inhomogeneities in LaNi5Dx owing to temperature gradients and pressure hysteresis, investigated using spatially resolved in-situ neutron diffraction

Abstract An in-situ neutron investigation of the spatial variation in hydride composition of LaNi5 after a single absorption pressure step was performed. Compositional inhomogeneities are formed due to the strong temperature gradients created by the rapid absorption process coupled with the pressure and temperature hysteresis of the metal–hydrogen interaction. The hydride fraction of LaNi5 in a cylindrical cell was mapped using the ENGIN-X stress/strain instrument and quantitative phase analysis performed using the Rietveld technique. The material was observed to preferentially absorb hydrogen close to the edges of the cell where heat transfer out of the material was more efficient. This spatial variation was maintained even after thermal equilibration. The experimental results are compared to predictions of a 3D multiphysics model solved by the software package COMSOL. The good agreement achieved demonstrates the suitability of this model for optimisation of metal hydride tank systems.

[1]  Andreas Poullikkas,et al.  Overview of current and future energy storage technologies for electric power applications , 2009 .

[2]  Rajesh K. Ahluwalia,et al.  On-board and Off-board performance of hydrogen storage options for light-duty vehicles , 2012 .

[3]  F. Askri,et al.  Numerical simulation of heat and mass transfer in metal hydride hydrogen storage tanks for fuel cell vehicles , 2010 .

[4]  S. Chan,et al.  Hydrogen storage for off-grid power supply , 2011 .

[5]  C. Buckley,et al.  Stability of the hydrogen absorption and desorption plateaux in LaNi5H Part 2: Effects of absorbing and desorbing large aliquots of hydrogen , 1994 .

[6]  M. Rokni,et al.  Bed geometries, fueling strategies and optimization of heat exchanger designs in metal hydride storage systems for automotive applications: A review , 2014 .

[7]  Choong-Nyeon Park,et al.  The effect of hydrogen aliquot size on the plateau pressures of LaNi5-H , 1983 .

[8]  E. Gray.  Frequency-domain hydriding and dehydriding kinetics of LaNi5Hx , 1992 .

[9]  Tim Gould,et al.  An improved model for metal-hydrogen storage tanks – Part 2: Model results , 2016 .

[10]  D. Gregory,et al.  Hydrogen: A future energy vector for sustainable development , 2010 .

[11]  Donald L. Anton,et al.  Hierarchical Methodology for Modeling Hydrogen Storage Systems. Part II: Detailed Models , 2009 .

[12]  F. Askri,et al.  Optimization of hydrogen storage in metal-hydride tanks , 2009 .

[13]  M. Pons,et al.  Heat Transfer in Hydride Packed Beds. III. Significant Interactions Between the Temperature and Composition Gradients* , 1994 .

[14]  J. Gore,et al.  A Review of Heat Transfer Issues in Hydrogen Storage Technologies , 2005 .

[15]  G. Sandrock.  A panoramic overview of hydrogen storage alloys from a gas reaction point of view , 1999 .

[16]  E. Gray,et al.  Mechanism of the α-to-β phase transformation in the LaNi5–H2 system , 2011 .

[17]  C. J. Webb,et al.  A review of mathematical modelling of metal-hydride systems for hydrogen storage applications , 2016 .

[18]  Xianguo Li,et al.  Effects of various operating conditions on the hydrogen absorption processes in a metal hydride tank , 2012 .

[19]  Tim Gould,et al.  An improved model for metal-hydrogen storage tanks – Part 1: Model development , 2016 .

[20]  Yuh Fukai,et al.  The Metal-Hydrogen System: Basic Bulk Properties , 2010 .

[21]  S. Ben Nasrallah,et al.  A novel design of a heat exchanger for a metal-hydrogen reactor , 2007 .

[22]  M. Dresselhaus,et al.  Alternative energy technologies , 2001, Nature.

[23]  S. S. Murthy,et al.  Experiments on a metal hydride based hydrogen compressor , 2005 .

[24]  P. Dantzer.  Properties of intermetallic compounds suitable for hydrogen storage applications , 2002 .

[25]  Ronald I. Smith,et al.  Time-of-flight neutron powder diffraction with a thick-walled sample cell , 2007 .