Hardening by Annealing and Softening by Deformation in Nanostructured Metals

We observe that a nanostructured metal can be hardened by annealing and softened when subsequently deformed, which is in contrast to the typical behavior of a metal. Microstructural investigation points to an effect of the structural scale on fundamental mechanisms of dislocation-dislocation and dislocation-interface reactions, such that heat treatment reduces the generation and interaction of dislocations, leading to an increase in strength and a reduction in ductility. A subsequent deformation step may restore the dislocation structure and facilitate the yielding process when the metal is stressed. As a consequence, the strength decreases and the ductility increases. These observations suggest that for materials such as the nanostructured aluminum studied here, deformation should be used as an optimizing procedure instead of annealing.

[1]  J. Weertman.  Hall-Petch strengthening in nanocrystalline metals , 1993 .

[2]  Burnhanettin Altan.  Severe plastic deformation : toward bulk production of nanostructured materials , 2006 .

[3]  R. Valiev,et al.  The Hall-Petch relation in submicro-grained Al-1.5% Mg alloy , 1992 .

[4]  Seong-Hee Lee,et al.  ARB (Accumulative Roll‐Bonding) and other new Techniques to Produce Bulk Ultrafine Grained Materials , 2003 .

[5]  D. Lloyd,et al.  Microstructure and strength of commercial purity aluminium (AA 1200) cold-rolled to large strains , 2002 .

[6]  A. A. Nazarov,et al.  Microstructures and hardness of ultrafine-grained Ni3Al , 1993 .

[7]  F. Ebrahimi,et al.  Deformation and fracture of electrodeposited copper , 1998 .

[8]  J. Weertman,et al.  Grain-size dependent hardening and softening of nanocrystalline Cu and Pd , 1992 .

[9]  K. Jacobsen,et al.  A Maximum in the Strength of Nanocrystalline Copper , 2003, Science.

[10]  H. V. Swygenhoven,et al.  On non-equilibrium grain boundaries and their effect on thermal and mechanical behaviour: a molecular dynamics computer simulation , 2002 .

[11]  Fenghua Zhou,et al.  High tensile ductility in a nanostructured metal , 2002, Nature.

[12]  Julia R. Greer,et al.  Size dependence of mechanical properties of gold at the micron scale in the absence of strain gradients , 2005 .

[13]  N. Hansen,et al.  Microstructural evolution of IF-steel during cold rolling , 2004 .

[14]  T. Nieh,et al.  Effects of annealing and impurities on tensile properties of electrodeposited nanocrystalline Ni , 2004 .

[15]  N. Hansen,et al.  Microstructure and strength of nickel at large strains , 2000 .

[16]  N. Tsuji,et al.  Microstructural change of ultrafine-grained aluminum during high-speed plastic deformation , 2003 .