Effect of Blade Inclination Angle on a Darrieus Wind Turbine

This paper presents a model for the evaluation of energy performance and aerodynamic forces acting on a small helical Darrieus vertical axis wind turbine depending on blade inclination angle. It consists of an analytical code coupled to a solid modeling software capable of generating the desired blade geometry depending on the desired design geometric parameters, which is linked to a finite volume CFD code for the calculation of rotor performance. After describing and validating the model with experimental data, the results of numerical simulations are proposed on the bases of five machine architectures, which are characterized by an inclination of the blades with respect to the horizontal plane in order to generate a phase shift angle between lower and upper blade sections of 0 deg, 30 deg, 60 deg, 90 deg, and 120 deg for a rotor having an aspect ratio of 1.5. The effects of blade inclination on tangential and axial forces are first discussed and then the overall rotor torque is considered as a function of azimuthal position of the blades. Finally, the downstream tip recirculation zone due to the finite blade extension is analyzed for each blade inclination angle, achieving a numerical quantification of the influence of induced drag on rotor performance, as a function of both blade element longitudinal and azimuthal positions of the blade itself.

[1]  Gerard van Bussel,et al.  Performance of a High Tip Speed Ratio H-Darrieus in the Skewed Flow on a Roof , 2003 .

[2]  D. Wilcox Turbulence modeling for CFD , 1993 .

[3]  J. Strickland,et al.  Dynamic-stall regulation of the Darrieus turbine , 1983 .

[4]  F. Menter Two-equation eddy-viscosity turbulence models for engineering applications , 1994 .

[5]  Russell M. Cummings,et al.  Computational challenges in high angle of attack flow prediction , 2003 .

[6]  I. Paraschivoiu,et al.  Aerodynamic Analysis Models for Vertical-Axis Wind Turbines , 1995 .

[7]  Carlos Simao Ferreira,et al.  2D PIV Visualization of Dynamic Stall on a Vertical Axis Wind Turbine , 2007 .

[8]  Ernesto Benini,et al.  Modeling Strategy and Numerical Validation for a Darrieus Vertical Axis Micro-Wind Turbine , 2010 .

[9]  I. Paraschivoiu,et al.  Viscous Flow and Dynamic Stall Effects on Vertical-Axis Wind Turbines , 1995 .

[10]  C. Masson,et al.  Appropriate Dynamic-Stall Models for Performance Predictions of VAWTs with NLF Blades , 1998 .

[11]  H. Bijl,et al.  Simulating Dynamic Stall in a 2D VAWT: Modeling strategy, verification and validation with Particle Image Velocimetry data , 2007 .

[12]  I. Paraschivoiu Wind turbine design with emphasis on Darrieus concept [ressource électronique] / Ion Paraschivoiu , 2002 .

[13]  T. Coakley,et al.  Turbulence Modeling Validation, Testing, and Development , 1997 .

[14]  P. Spalart A One-Equation Turbulence Model for Aerodynamic Flows , 1992 .

[15]  T. Coakley,et al.  TURBULENCE MODELING VALIDATION , 1997 .