Experimental verification of a hybrid control scheme with chaotic whale optimization algorithm for nonlinear gantry crane: A comparative study.

This paper proposes an experimental verification of a hybrid partial feedback linearization (PFL) and deadbeat (DB) control scheme as in Hamdy et al. (2018) with chaotic whale optimization algorithm (CWOA) for a nonlinear gantry crane (GC) system. The PFL linearizes the nonlinear model to end up with a linear closed-loop system. The DB controller is utilized for the desirable accelerated response without any oscillation or undesirable effects on the internal dynamics stability. The CWOA is used to tune the controller parameters. A sliding-mode observer (SMO) is utilized to estimate the unmeasured states. Using this hybrid scheme, a better payload sway elimination can be obtained. Finally, the experimental results are presented to illustrate the efficiency and the effectiveness of the proposed scheme with a comparative study.

[1]  Naif B. Almutairi,et al.  Sliding Mode Control of a Three-dimensional Overhead Crane , 2009 .

[2]  Tomás Vyhlídal,et al.  Signal shaper with a distributed delay: Spectral analysis and design , 2013, Autom..

[3]  Christopher Edwards,et al.  Sliding Mode Control and Observation , 2013 .

[4]  Kazushi Nakano,et al.  Nominal performance recovery by PID+Q controller and its application to antisway control of crane lifter with visual feedback , 2004, IEEE Transactions on Control Systems Technology.

[5]  Sankalap Arora,et al.  Chaotic whale optimization algorithm , 2018, J. Comput. Des. Eng..

[6]  Soon-Geul Lee,et al.  Energy-Based Approach for Controller Design of Overhead Cranes: A Comparative Study , 2013 .

[7]  Q. H. Ngo,et al.  Sliding-Mode Antisway Control of an Offshore Container Crane , 2012, IEEE/ASME Transactions on Mechatronics.

[8]  A. Levant.  Sliding order and sliding accuracy in sliding mode control , 1993 .

[9]  Cheng-Yuan Chang,et al.  Efficient Visual Feedback Method to Control a Three-Dimensional Overhead Crane , 2014, IEEE Transactions on Industrial Electronics.

[10]  Bin Yao,et al.  Adaptive Robust Precision Motion Control of a High-Speed Industrial Gantry With Cogging Force Compensations , 2011, IEEE Transactions on Control Systems Technology.

[11]  Ning Sun,et al.  Sliding mode control for underactuated overhead cranes suffering from both matched and unmatched disturbances , 2017 .

[12]  Mostafa Ghayour,et al.  Sensorless anti-swing control for overhead crane using voltage and current measurements , 2015 .

[13]  Mohamed Hamdy,et al.  A hybrid partial feedback linearization and deadbeat control scheme for a nonlinear gantry crane , 2018, J. Frankl. Inst..

[14]  Carlos Vázquez,et al.  Control of a Parametrically Excited Crane: A Vector Lyapunov Approach , 2013, IEEE Transactions on Control Systems Technology.

[15]  Dongbin Zhao,et al.  Design of a stable sliding-mode controller for a class of second-order underactuated systems , 2004 .

[16]  Yudong Zhang,et al.  A Novel Kinematic Coupling-Based Trajectory Planning Method for Overhead Cranes , 2012, IEEE/ASME Transactions on Mechatronics.

[17]  Mehrdad Saif,et al.  Output Feedback Controller Design for a Class of MIMO Nonlinear Systems Using High-Order Sliding-Mode Differentiators With Application to a Laboratory 3-D Crane , 2008, IEEE Transactions on Industrial Electronics.

[18]  He Chen,et al.  A Swing Constraint Guaranteed MPC Algorithm for Underactuated Overhead Cranes , 2016, IEEE/ASME Transactions on Mechatronics.

[19]  Cheng-Yuan Chang,et al.  Real-Time Visual Tracking and Measurement to Control Fast Dynamics of Overhead Cranes , 2012, IEEE Transactions on Industrial Electronics.

[20]  Xuebo Zhang,et al.  A Motion Planning-Based Adaptive Control Method for an Underactuated Crane System , 2012, IEEE Transactions on Control Systems Technology.

[21]  Menghua Zhang,et al.  A novel online motion planning method for double-pendulum overhead cranes , 2016 .

[22]  Le Anh Tuan,et al.  Modeling and advanced sliding mode controls of crawler cranes considering wire rope elasticity and complicated operations , 2018 .

[23]  Arie Levant,et al.  Higher-order sliding modes, differentiation and output-feedback control , 2003 .

[24]  Abdul Rashid Husain,et al.  Improved unity magnitude input shaping scheme for sway control of an underactuated 3D overhead crane with hoisting , 2019, Mechanical Systems and Signal Processing.

[25]  R. A. Paz,et al.  Ripple-free tracking with robustness , 2006 .

[26]  Andrew Lewis,et al.  The Whale Optimization Algorithm , 2016, Adv. Eng. Softw..

[27]  Diego Oliva,et al.  Parameter estimation of photovoltaic cells using an improved chaotic whale optimization algorithm , 2017 .

[28]  Ning Sun,et al.  Minimum-Time Trajectory Planning for Underactuated Overhead Crane Systems With State and Control Constraints , 2014, IEEE Transactions on Industrial Electronics.

[29]  M. O. Tokhi,et al.  Control of a gantry crane using input-shaping schemes with distributed delay , 2017 .

[30]  Ning Sun,et al.  New Energy Analytical Results for the Regulation of Underactuated Overhead Cranes: An End-Effector Motion-Based Approach , 2012, IEEE Transactions on Industrial Electronics.

[31]  Le Anh Tuan,et al.  Adaptive neural network sliding mode control of shipboard container cranes considering actuator backlash , 2018, Mechanical Systems and Signal Processing.

[32]  A. Levant.  Robust exact differentiation via sliding mode technique , 1998 .

[33]  Tomás Vyhlídal,et al.  Input Shapers with Uniformly Distributed Delays , 2012, TDS.

[34]  Jae-Jun Kim,et al.  Second-order sliding mode control of a 3D overhead crane with uncertain system parameters , 2014 .

[35]  Auwalu M. Abdullahi,et al.  Model reference command shaping for vibration control of multimode flexible systems with application to a double-pendulum overhead crane , 2019, Mechanical Systems and Signal Processing.

[36]  Bin Yang,et al.  Application of LQR Techniques to the Anti-Sway Controller of Overhead Crane , 2010 .

[37]  Hazriq Izzuan Jaafar,et al.  An improved input shaping design for an efficient sway control of a nonlinear 3D overhead crane with friction , 2017 .