Aluminum electroplating on steel from a fused bromide electrolyte

[1]  Zhongning Shi,et al.  Electrochemical Deposition and Nucleation of Aluminum on Tungsten in Aluminum Chloride-Sodium Chloride Melts , 2009 .

[2]  Suojiang Zhang,et al.  A promising method for electrodeposition of aluminium on stainless steel in ionic liquid , 2009 .

[3]  R. Winston Revie,et al.  Corrosion and corrosion control : an introduction to corrosion science and engineering , 2008 .

[4]  Eric J. Dufek,et al.  Dioxygen Reduction Affects Surface Oxide Growth and Dissolution on AA2024-T3 , 2007 .

[5]  A. Lasia,et al.  Studies on the AlCl3/dimethylsulfone (DMSO2) electrolytes for the aluminum deposition processes , 2007 .

[6]  M. Ueda,et al.  Co-deposition of Al-Cr-Ni alloys using constant potential and potential pulse techniques in AlCl3-NaCl-KCl molten salt , 2007 .

[7]  M. Jafarian,et al.  Electrodeposition of aluminum from molten AlCl3–NaCl–KCl mixture , 2006 .

[8]  M. Jafarian,et al.  Effect of potential on the early stage of nucleation and growth during aluminum electrocrystallization from molten salt (AlCl3–NaCl–KCl) , 2006 .

[9]  S. Amico,et al.  The effect of roughness and pre-heating of the substrate on the morphology of aluminium coatings deposited by thermal spraying , 2006 .

[10]  T. Nohira,et al.  Electrochemical Window and the Characteristics of ( α + β ) Al-Li Alloy Reference Electrode for a LiBr-KBr-CsBr Eutectic Melt , 2004 .

[11]  Deqing Wang,et al.  Aluminizing and oxidation treatment of 1Cr18Ni9 stainless steel , 2004 .

[12]  W. Deqing,et al.  A liquid aluminum corrosion resistance surface on steel substrate , 2003 .

[13]  J. J. Broek,et al.  Crystallisation and electrical resistivity of sputter-deposited aluminium–germanium alloy films , 2001 .

[14]  J. Fransaer,et al.  Electrolytic Codeposition of Silica Particles with Aluminum from AlCl3-Dimethylsulfone Electrolytes , 2001 .

[15]  T. Cale,et al.  Texture and surface roughness of PRCVD aluminum films , 1998 .

[16]  R. Hippler,et al.  On the energy influx to the substrate during sputter deposition of thin aluminium films , 1998 .

[17]  G. Frankel.  Pitting Corrosion of Metals A Review of the Critical Factors , 1998 .

[18]  H. Mazille,et al.  Aluminium and Ti/Al multilayer PVD coatings for enhanced corrosion resistance , 1997 .

[19]  K. Rissanen,et al.  THE CSBR-ALBR3 PHASE DIAGRAM AND THE CRYSTAL STRUCTURE OF CSALBR4 , 1997 .

[20]  T. Vandernoot,et al.  Electrodeposition of aluminium from nonaqueous organic electrolytic systems and room temperature molten salts , 1997 .

[21]  S. H. White,et al.  The chemistry and electrochemistry associated with the electroplating of group VIA transition metals , 1987 .

[22]  P. Fellner,et al.  Electrolytic aluminium plating in molten salt mixtures based on AlCl3 I: Influence of the addition of tetramethylammonium chloride , 1981 .

[23]  M. Gálová.  Electrodeposition of aluminium from organic aprotic solvents , 1980 .

[24]  B. Nayak,et al.  The electrodeposition of aluminium on brass from a molten aluminium chloride-sodium chloride bath , 1977 .

[25]  Ned Godshall,et al.  Molten Salt Metalliding of Nickel Alloys , 1976 .

[26]  K. Matiašovský,et al.  Electrolytic aluminium-plating in fused salts based on chlorides , 1975 .

[27]  N. Ishibashi,et al.  High-rate plating of aluminium from the bath containing aluminium chloride and lithium aluminium hydride in tetrahydrofuran , 1973 .

[28]  D. W. Macmillan,et al.  The electrodeposition of aluminium from molten aluminium chloride/sodium chloride , 1972 .

[29]  N. Ishibashi,et al.  Electrodeposition of aluminium from the NBS type bath using tetrahydrofuran—benzene mixed solvent. , 1972 .