Temperature Controlled Mechanical Reinforcement of Polyacrylate Films Containing Nematic Liquid Crystals

This investigation reports on the thermomechanical properties of Poly-tripropyleneglycoldiacrylate (Poly-TPGDA)/liquid crystal (LC) blends, developed via free radical polymerization processes, which are induced by Electron Beam (EB) and Ultraviolet (UV) radiation. The EB-cured Poly-TPGDA network exhibits a higher glass transition temperature (Tg), a higher tensile storage, and Young moduli than the corresponding UV-cured sample, indicating a lower elasticity and a shorter distance between the two adjacent crosslinking points. Above Tg of Poly-TPGDA/LC blends, the LC behaves as a plasticizing agent, whereas, for EB-cured networks, at temperatures below Tg, the LC shows a strong temperature dependence on the storage tensile modulus: the LC reinforces the polymer due to the presence of nano-sized phase separated glassy LC domains, confirmed by electron microscopy observations. In the case of the UV-cured TPGDA/LC system, the plasticizing effect of the LC remains dominant in both the whole composition and the temperature ranges explored. The rubber elasticity and Tg of Poly-TPGDA/LC films were investigated using mechanical measurements.

[1]  Xingji Li,et al.  Wearable hydroxylated MWCNTs/ecoflex composite strain sensor with high comprehensive performance based on electron irradiation , 2022, Composites Science and Technology.

[2]  C. Chia,et al.  Inorganic-organic nanocomposite networks: Structure, curing reaction, properties, and hard coating performance , 2021, Composites Science and Technology.

[3]  Lanying Zhang,et al.  Recent Advances in The Polymer Dispersed Liquid Crystal Composite and Its Applications , 2020, Molecules.

[4]  R. Deshmukh,et al.  An Overview of Polymer-Dispersed Liquid Crystals Composite Films and Their Applications , 2020, Liquid Crystals and Display Technology.

[5]  M. S. Ghamsari,et al.  Liquid Crystals and Display Technology , 2020 .

[6]  A. Kowalczyk,et al.  Free-Radical Bulk-Photopolymerization Process as a Method of Obtaining Thermally Curable Structural Self-Adhesive Tapes and Effect of Used Type I Photoinitiators , 2020, Polymers.

[7]  D. Drummer,et al.  Curing Kinetic Analysis of Acrylate Photopolymer for Additive Manufacturing by Photo-DSC , 2020, Polymers.

[8]  Y. Sanai,et al.  Effect of UV-curing conditions on the polymer structures: a comparison between coating and adhesive , 2020, Polymer Journal.

[9]  R. Cardinaels,et al.  Characterization of Ultraviolet-Cured Methacrylate Networks: From Photopolymerization to Ultimate Mechanical Properties , 2019, Macromolecules.

[10]  I. Dierking.  Polymer-modified Liquid Crystals , 2019, Soft Matter Series.

[11]  F. Dubois,et al.  Chapter 4. Electron Beam Curing of Monomer/Liquid Crystal Blends , 2019, Soft Matter Series.

[12]  U. Maschke,et al.  Optical properties of electron beam- and UV-cured polypropyleneglycoldiacrylate/liquid crystal E7 systems , 2015 .

[13]  P. Blanchet,et al.  Electron-Beam Curing of Acrylate/Nanoparticle Impregnated Wood Products , 2015 .

[14]  V. V. Zuev,et al.  Polymer-Dispersed Liquid Crystals: Progress in Preparation, Investigation, and Application , 2013 .

[15]  E. Vivaldo‐Lima,et al.  Handbook of Polymer Synthesis, Characterization, and Processing: Saldívar-Guerra/Handbook of Polymer Synthesis, Characterization, and Processing , 2013 .

[16]  A. Rudin.  Chapter 9 – Copolymerization , 2013 .

[17]  J. Lagerwall,et al.  A new era for liquid crystal research: Applications of liquid crystals in soft matter nano-, bio- and microtechnology , 2012 .

[18]  M. Messori,et al.  Photo-cured epoxy networks reinforced with TiO2 in-situ generated by means of non-hydrolytic sol–gel process , 2012 .

[19]  F. Dubois,et al.  Some Properties of Nematic Liquid Crystal E7/Acrylic Polymer Networks , 2011 .

[20]  J. Rhee,et al.  Nanoparticle-doped polymer-dispersed liquid crystal display , 2011 .

[21]  P. Tiberto,et al.  Photoinitiator‐Free UV‐Cured Acrylic Coatings Containing Magnetite Nanoparticles , 2010 .

[22]  Stacy M. Trey,et al.  Electron-beam-initiated polymerization of poly(ethylene glycol)-based wood impregnants. , 2010, ACS applied materials & interfaces.

[23]  Young-Seak Lee,et al.  The impact of fluorinated MWCNT additives on the enhanced dynamic mechanical properties of e-beam-cured epoxy , 2010 .

[24]  K. Menard.  Dynamic Mechanical Analysis: A Practical Introduction, Second Edition , 2008 .

[25]  H. Ade,et al.  Influence of sample preparation and processing on observed glass transition temperatures of polymer nanocomposites , 2007 .

[26]  R. Kirchheim,et al.  Mechanical spectroscopy of PVCN with increasing cross-linking degree , 2007 .

[27]  A. Aguiar-Ricardo,et al.  Characterization of a nematic mixture by reversed‐phase HPLC and UV spectroscopy: an application to phase behaviour studies in liquid crystal–CO2 systems , 2007 .

[28]  P. Albouy,et al.  Stress-Induced Crystallization and Reinforcement in Filled Natural Rubbers: 2H NMR Study , 2006 .

[29]  Junrong Zheng,et al.  Phase separation and mechanical responses of polyurethane nanocomposites , 2006 .

[30]  T. Pakula,et al.  Static and dynamic mechanical behavior of electron beam-cured monomer and monomer/liquid crystal systems , 2004 .

[31]  Liqun Zhang,et al.  Modeling Young’s modulus of rubber–clay nanocomposites using composite theories , 2004 .

[32]  B. Carbonnier,et al.  PHYSICAL PROPERTIES OF ELECTRON BEAM-CURED TRIPROPYLENEGLYCOLDIACRYLATE AND LIQUID CRYSTAL SYSTEMS , 2004 .

[33]  S. Ray,et al.  Influence of untreated and novel electron beam modified surface coated silica filler on dynamic mechanical thermal properties of ethylene‐octene copolymer , 2004 .

[34]  S. Ray,et al.  Influence of untreated and novel electron beam modified surface coated silica filler on rheometric and mechanical properties of ethylene-octene copolymer , 2003 .

[35]  M. Mucha,et al.  Polymer as an important component of blends and composites with liquid crystals , 2003 .

[36]  T. Pakula,et al.  Mechanical properties of electron beam cured monomer and monomer/liquid crystal films , 2002 .

[37]  U. Maschke,et al.  Electro-Optical Properties of Polymer-Dispersed Liquid Crystals , 2002 .

[38]  Robert A. Meyers,et al.  Encyclopedia of analytical chemistry : applications, theory and instrumentation , 2000 .

[39]  K. Menard.  Dynamic Mechanical Analysis: A Practical Introduction , 1997 .

[40]  C. Decker,et al.  Photoinitiated crosslinking polymerisation , 1996 .

[41]  P. Popper,et al.  Science of Materials , 1966 .

[42]  M. Huggins.  Viscoelastic Properties of Polymers. , 1961 .

[43]  A. Charlesby.  Effect of High-energy Radiation on Long-chain Polymers , 1953, Nature.